| Buy just the adapters you need to
perform Ball Joint service on a variety of 4x4 vehicles.
Most adapters have either a Black Oxide or Black Paint
finish for protection from corrosion. Adapters are
manufactured to fit Ball Joints with original equipment
external dimensions. Some aftermarket Ball Joints
may require different installation adapters. All T-prefix
Tools are Made in U.S.A., all M-prefix tools are
imported from China |
T1054 |
T1054 Lower
Ball Joint Installer for use with a regular hydraulic
Shop Press (Not for use with C-Frame
Press)
$35.97
or Save $3
by purchasing
Online for only $32.97!
Applications:
Dodge: 1994-1999
2500 V8 gas w/8,800 GVWR or higher rating
Dodge: 1994-1999 All Diesel and V10 2500 and 3500
trucks
Ford: 1980-1997 F-250 and F-350 w/Model 50
4600# IFS axle
Ford: 1992-1997 F-350
Ford: 1999-current F-250, F-350
Ford: 1999-2004 F-450 and F-550 |
|
1065 Series
C-Frame Presses
Specifications:
8¾" Throat
7/16" Rotating Tip
1-1/8" Screw Thread
2-1/8" Tool Hole
(Replaceable Rotating
Tips are supported by a hardened ball.) |
T1065
Professional Duty Long Throat C-Frame Press can be used
for Ball Joint and Universal Joint service on most 4x4's
with the appropriate adapters. Made in U.S.A.
$229.97
or Save $20
by purchasing
Online for only $209.97! (Limited supply, will
usually ship within 1-2 Days, but may require up to 10
day lead time) |
|
|
NEW! M1065 A
less expensive version of our T1065 C-Frame Press which is ideal
for the Do-It-Yourselfer. It is dimensionally the
same as our Pro-Duty T1065 and it can be used to perform
Ball Joint and Universal Joint service on most 4x4's
with any adapter made for the T1065. Made in China
$119.97
or Save $10
by purchasing
Online for only $109.97! |
|
|
 |
T1066 Lower
Ball Joint Removal Receiver for 2000-2002 Dodge Ram 2500
and 3500 4x4 trucks. Machined to fit the Knuckle
recess surrounding the Lower Ball Joint. 7/16"
Hole in Cap.
$41.97
or Save $4
by purchasing
Online for only $37.97!
Applications:
Dodge: 2000-2002 Ram 2500 and 3500 |
|
 |
T1067 Ball
Joint Installer is used to install both Upper and Lower
Ball Joints on 2000-2002 Dodge Ram 2500 and 3500 4x4
trucks. Also installs the Upper Ball Joint in
2003-current Dodge 2500 and 3500 4x4 trucks
(plus works with some 2003-up Aftermarket Lower Ball
Joints) 7/16" Hole in Cap.
$38.97
or Save $4
by purchasing
Online for only $34.97!
Applications:
Dodge: 2000-current Ram 2500 and 3500 |
|
 |
T1069
is used on many 4x4 applications.
$41.97
or Save $4
by purchasing
Online for only $37.97!
Dodge:
2000-2002 Dodge Ram 2500 and 3500 trucks upper removal
Dodge (when installing lower nut):
1994-1999
2500 V8 gas w/8,800 GVWR or higher rating
1994-1999 All Diesel and V10 2500 and 3500 trucks
Ford (when installing lower nut):
1980-1997 F-250 and F-350 w/Model 50
4600# IFS axle
1992-1997 F-350
1999-current F-250, F-350
1999-2004 F-450 and F-550 |
|
|
|
 |
T1140 Lower
Ball Joint Removal Receiver for Ball Joint Model 50 and
60 axles from 1980-current. Machined to fit the Knuckle
recess surrounding the Lower Ball Joint. 7/16"
Hole in Cap
$44.97
or Save $4
by purchasing
Online for only $40.97!
Applications:
Dodge:
1994-1999
2500 V8 gas w/8,800 GVWR or higher rating
Dodge: 1994-1999 All Diesel and V10 2500 and 3500
trucks
Ford: 1980-1997 F-250 and F-350 w/Model 50
4600# IFS axle
Ford: 1992-1997 F-350
Ford: 1999-current F-250, F-350
Ford: 1999-2004 F-450 and F-550 |
|
 |
T1141 Upper
Ball Joint Removal Receiver for Model 30, Model 44,
Model 50 and 60 axles from 1969-current. Machined to fit
the Knuckle recess surrounding the Ball Joint.
7/16" Hole in Cap (Also see T1185)
$40.97
or Save $4
by purchasing
Online for only $36.97!
Applications:
Chevy/GMC: 1969-1991all Blazer, Suburban,
½ & ¾ ton (solid
axle)
Dodge:
1974-1993 All Ramcharger, W100, W150, W200, W250
Dodge: 1994-1999 2500 & 3500 8,800 GVWR or
higher rating
Ford: 1973-1996 Bronco, F-100, F-150
w/Model 30 & 44 axles
Ford: 1976-1979 F-250 with model 44 axle
Ford: 1980-current F-250 and F-350
Ford: 1999-2004 F-450 and F-550 Trucks
IHC: 1973-1979 Scout,
IHC: 1971½-1975
½ & ¾ ton truck w/Model 44
axle
Jeep: 1972-1986 CJ
Jeep: 1972-1992 All Full Size Models (J-Series) |
|
 |
T1142 Ball
Joint Installer is used to install the Upper Ball
Joints on Model 30, Model 44, Model 50 and 60 axles from
1969-current. 7/16" Hole in Cap
$38.97
or Save $4
by purchasing
Online for only $34.97!
Applications:
Chevy/GMC: 1969-1991all Blazer, Suburban,
½ & ¾ ton (solid
axle)
Dodge:
1974-1993 All Ramcharger, W100, W150, W200, W250
Dodge: 1994-1999 2500 & 3500 8,800 GVWR or
higher rating
Ford: 1973-1996 Bronco, F-100, F-150
w/Model 30 & 44 axles
Ford: 1976-1979 F-250, F-350 with model 44
axle
Ford: 1980-current F-250, F-350
Ford: 1999-2004 F450, and F550 Trucks
IHC: 1973-1979 Scout,
IHC: 1971½-1975
½ & ¾ ton truck w/Model 44
axle
Jeep: 1972-1986 CJ
Jeep: 1972-1992 All Full Size Models (J-Series) |
|
|
|
T1147 |
T1147 Press
Stub is machined to fit either end of 1065 series
Presses. Used in conjunction with the appropriate
receiver to remove both Upper and Lower Ball Joints from
most 4x4's were the Ball Joint is pressed into the
Steering Knuckle.
$32.97
or Save $3
by purchasing
Online for only $29.97!
Applications:
Chevy/GMC: 1969-1991all Blazer, Suburban,
½ & ¾ ton (solid
axle)
Dodge:
1974-1993 All Ramcharger, W100, W150, W200, W250
Dodge: 1994-1999 2500 & 3500 8,800 GVWR or
higher rating
Ford: 1973-1996 Bronco, F-100, F-150
w/Model 30 & 44 axles
Ford: 1976-1979 F-250 with model 44 axle
Ford: 1980-current F-250 and F-350
Ford: 1999-2004 F450, and F550 Trucks
IHC: 1973-1979 Scout,
IHC: 1971½-1975
½ & ¾ ton truck w/Model 44
axle
Jeep: 1972-1986 CJ
Jeep: 1972-1992 All Full Size Models (J-Series) |
|
 |
T1148 Press
Sleeve is used when installing the lower ball joint on
2003-up Dodge Ram 2500 and 3500 trucks. It is also
used to install the Lower Ball Joint and to seat the
Lower Ball Joint Stud on Dana Model 50 and 60 axles.
$22.97
or Save $3
by purchasing
Online for only $19.97!
Lower Ball Joint Applications:
Dodge: 1994-1999
2500 V8 gas w/8,800 GVWR or higher rating
Dodge: 1994-1999 All Diesel and V10 2500 and 3500
trucks
Dodge: 2003-up Dodge Ram 2500 and 3500
Ford: 1980-1997 F-250 and F-350 w/Model 50
4600# IFS axle
Ford: 1992-1997 F-350
Ford: 1999-current F-250, F-350
Ford: 1999-2004 F-450 and F-550 |
|
 |
T1152
Press Stub is used to press out both the Upper and Lower
Ball Joints on many late model Dodge trucks.
$38.97
or Save $4
by purchasing
Online for only $34.97!
Applications:
Dodge: 1994-2001 Ram 1500
Dodge: 1994-1999 Ram 2500 under 8,800 GVWR
(gas V8 engine)
Dodge: 2000-current Ram 2500 and 3500 |
|
|
|
 |
T1153
Ball Joint Receiver works on 2003-current Dodge Ram
axles when removing both Upper and Lower Ball Joints,
plus it is used to install the Lower Ball Joint Seals on
the same trucks. 7/16" hole in cap.
$44.97
or Save $4
by purchasing
Online for only $40.97!
Applications:
Dodge: 2003-current Ram 2500 and 3500 |
|
 |
T1154 Press Sleeve
is used when installing the Upper Ball Joint on 2003-up
Dodge Ram 2500 and 3500 trucks
$29.97
or Save $3
by purchasing
Online for only $26.97!
Applications:
Dodge: 2003-current Ram 2500 and 3500 |
|
 |
T1155
Ball Joint installer works on 2003-current Dodge Ram
axles to press in the Upper Ball Joint. 7/16" hole in
cap.
$38.97
or Save $4
by purchasing
Online for only $34.97!
Applications:
Dodge: 2003-current Ram 2500 and 3500 |
|
|
|
| |
T1185 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
