QUAD 4 x4 Your 4x4 Experts!
23 Turner Rd., Roberts, Montana 59070
 CALL  406-446-2427 Order 24 hours a day.  7 days a week.

e-mail for product information: dan@quad4x4.com

MAIN PAGE INDEX

Home
4x4 Service Manuals
4x4 Tools
Parts for Dodge
Parts for Ford
Parts GMC & Chevy
Parts for Jeep
Common Axle Parts
Dana Axle Parts
NP205 Transfer Case
NV4500 Transmissions
Order & Tax Info
On Vehicle
Shop Services
Off Vehicle
Shop Services
What's New
Contact Us
Tech Article Index
Customer Feedback
Links to our
Other Sites:
4x4techinfo.com
Torque King
Links to Our Dodge Specific Pages:
Engine & Clutch
1970-1993 Dana
Front Axle & Steering
1994-2002 Dana
Front Axle & Steering
2003-up AAM
Front Axle & Steering
Transmission Parts
1989-1993 Getrag to NV4500 Conversion
94-04 NV4500
In Shop Overhaul
NV5600 Transmissions
NV5600 Parts
Transfer Case Parts
Propeller Shafts
Rear Axle Parts
Differential and Gear
Dana Axles to 2002
Brake Parts
Special Tools
Tech Article:
Getrag G360 to NV4500HD Conversion
Tech Article: Preventative Maintenance for Dodge Second Generation Front Axles
Links to Our Ford Specific Pages:
1958-1997 Dana
Front Axle Parts
1998-up Super Duty F250-F550 Dana
Front Axle  Parts
2005-up Super Duty Front Axle
Clutch
ZF42 and ZF47
Transmission Parts
Transmission Parts
Transfer Case Parts
Rear Axle Parts
Drive Shaft Parts
Special Tools
Links to Our
GMC & Chevy Pages
Front Axle & Steering
Transmission Parts
Transfer Case Parts
Drive Shaft Parts
Rear Axle Parts
Special Tools
Links to Our Jeep Specific Pages:
Front Axle & Steering
Transmission Parts
Transfer Case Parts
Drive Shaft Parts
Rear Axle Parts
Special Tools
Links to Our
NV4500 Pages:
Transmissions
Rebuild Kits
Parts
Small Parts
Special Tools
Tech Article: 5th Gear Failures & Solutions
NV4500 Conversions
Frequently Asked Questions
Tech Article:
 Cast Iron NV4500 Tailshaft Housings
Links to Our
General Interest Pages:
Tech Article: Dana Rear Axle Component Failures
Tech Article: Causes of Manual Transmission Failures
Feed Back

Dan the Gear Man

U.S.A. Made Apparel

Montana Beartooth Mountain Country

Links to Other Websites of Interest
Turbo Diesel Register
Agri-Services
Wiring Harnesses for Vintage Equipment
Power Stroke Registry
Peaks to Plains Museum
(Red Lodge, MT)
Montana Dept of Fish Wildlife & Parks

 


QUAD Apparel
Official PayPal Seal
 
Chevy and GMC Front Axle Jeep Front Axle
Dodge Front Axle 1994-2002 Dodge Front Axle 1970 to 1993
Ford Front Axle to 1998 Ford Super Duty Front Axle 1998-up

COMMON REAR AXLE SMALL PARTS

Solid Rear Drive Axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep from the 1940's to current shared many common small parts. 

Shipping Note: Select USPS mail for the lowest shipping cost on small parts orders.

Lockout Hub Parts SPINDLE_BOLTS SPINDLE BEARINGS/SEALS AXLE_SLINGERS
WHEEL_SEAL_KITS AXLE_
U-JOINT_Kits
KING_PIN_PARTS CLOSED_KNUCKLE_PARTS_


See Our What's New Web Page

SPINDLE NUT KITS


QK4728
6 Slot Spindle Nut Kit

Check Out Now

 

Round, 6 Slot Spindle Nut Kit for 3/4 and 1 Ton trucks with 2" spindle threads includes Inner Thrust Washer, Two 6 Slot Spindle Nuts, and Bend Over Tab Spindle Lock Washer.   Made in U.S.A. $26.97
QK4728 6 Slot Spindle Nut Kit $37.97



QK4730
2.5" OD Hex Spindle Nut Kit

Check Out Now

Shipping Note: Select USPS mail for the lowest shipping cost on small parts orders.

Hex Spindle Nut Kits for 3/4 and 1 Ton trucks. Each Kit includes 2 Hex Spindle Nuts and Bend Over Tab Spindle Lock Washer.   Made in U.S.A.
QK4763 Hex Spindle Nut Kit for 1-13/16" Spindle Threads.  Nuts measure 2-3/8" across flats. $15.50


QK4730 Hex Spindle Nut Kit for 2" Spindle Threads.  Nuts measure 2-1/2" across flats. $20.97


Spindle Lock Washers
   

Spindle Lock Washer set for Ford and Dodge with Rounded Hex Nuts that measure 2-9/16" across the flats.  Order from our Ford Rear Axle Page Key tab is approximately .200" wide, Washer is about .060" thick

QU20017-2 Spindle Lock Washer Kit


QU40027-2
Spindle Lock Washer Set

Spindle Lock Washer for 1-13/16" diameter spindles.  Use with hex nuts that measure 2-3/8" across the flats.
QU40027-2 Set of 2 1-13/16" ID Spindle Lock Washers $9.98


Flat Tab Spindle Lock Washer Set fits front and rear applications on 1950's to mid 1970's 1 ton and 1¼ Dodge, International, and Jeep trucks with 2" spindle threads, narrow key slots and regular hex spindle nuts that measure 2-1/2" across the flats. Key tab is approximately .200" wide. Washer is about .088" thick .

QU15004-2 for Vintage trucks with 2" spindle threads $18.95


  Check Out Now


QU40051-2
Flat Tab Spindle Lock Washer Set

Shipping Note: Select USPS mail for the lowest shipping cost on small parts orders.

Flat Tab Spindle Lock Washer Set fits front and rear applications with 2" spindle threads, wide key slots and regular hex spindle nuts that measure 2-1/2" across the flats. Key tab is approximately .260" wide. Washer is about .075" thick

QU40051-2 Flat Tab Spindle Lock Washer Set $9.98


Check Out Now


QU40037-2
Bent Tab Spindle Lock Washer Set

Bent Tab Spindle Lock Washer Set fits front and rear applications with 2" spindle threads and 6 slot spindle nuts
QU40037-2 Bent Tab Spindle Lock Washer Set $9.98


Check Out Now
   

WHEEL SEAL KITS


Wheel Seal Kit

 

Check Out Now

 

 

Shipping Note:  Select USPS mail for the lowest shipping cost on small parts orders.


Axle Shaft Flange Gaskets For Full Float Rear Axles

5 Sizes of 8 Bolt Rear Axle Shaft to Hub Gaskets to Choose From.  Precision Cut Original Equipment quality gaskets provide a clean, leakproof seal between the wheel hub and axle shaft flange on 3/4 ton to 1-1/2 ton 4x4 and 4x2 rear full float axles.  Made in U.S.A. Dan the Gear Man Tech Note: To prevent loss of oil, axle shaft gaskets should never be reused.

Click on the Thumbnail for Gasket Identification Instructions
QU15003 8 Bolt Paper Hub Gasket fits 1967-1969 1¼ ton Jeep M715 military series, and many late 1960's to mid 1970's Dodge and International 1 ton trucks. approximately 4-3/32" Bolt Circle with holes for 7/16" studs.  $7.79 each or Save Over 10% by purchasing Online for only $6.99 each! (Limited Supply, Up to 10 Day Lead Time to Ship  


QU30010 8 Bolt metal hub gasket fits GM trucks, vans, and motorhomes all the way back to 1960 equipped with GM HO52, HO72, and 14 bolt full float axles.  Also fits Dana 70HD Rear Axles found in many dual rear wheel GM vehicles  from the mid 1970's to 1994. 3-9/16" Bolt Circle with holes for 1/2" bolts. $4.39 each or Save 10% by purchasing Online for only $3.95 each!  


  Check Out Now
QU30051 8 Bolt aluminum hub gasket fits 1960's to 1972 GM trucks and vans with Dana 60 Rear Axles and 1974-1988 Jeep J-20 3/4 ton trucks which also used Dana 60 Rear Axles.   3-23/32" Bolt Circle with holes for 7/16" bolts. $11.99 each or Save 10% by purchasing Online for only $10.79 each!  (Extremely Limited Supply)  


QU40078 8 Bolt Embossed Steel Hub Gasket fits most Dodge and Ford trucks and vans with Dana-Spicer Model 60 and 70 rear axles plus all 1994-2002 Dodge trucks with the Dana 80 Rear Axle 4.000" Bolt Circle with holes for 7/16" bolts or studs.  $4.39 each or Save 10% by purchasing Online for only $3.95 each!

 


QU40241 8 Bolt Embossed Steel Hub Gasket fits Ford Super Duty F350 and F450 trucks with Dana 80 Rear Axles 4-5/16" Bolt Circle with holes for 12mm bolts. $4.49 each or Save over 10% by purchasing Online for only $3.99 each!

 


  Check Out Now
SPINDLE BOLTS AND STUDS
   


A Relic of the Past
Nailed to a tree in the Red Lodge Creek Drainage is this reminder of bygone days in the Custer National Forest.  For better or worse, commercial logging on National Forest Lands in Carbon County, Montana ceased many years ago.  
Back to Top

Check Out Now

copyright © 2004-2007 4x4 Tech, Inc.  All rights reserved.
23 Turner, Roberts, MT 59070 • 406-446-2427
Please send product questions, comments, and suggestions to dan@quad4x4.com