|
DRIVESHAFT CENTER
BEARINGS FOR 1994-2002 DODGE TRUCKS |
|
Center Bearing Kits for 1994-2002 model year Dodge trucks Replace that loose, worn, or
squeaky center bearing on your
2 or 4 wheel
drive Dodge truck with a genuine original equipment replacement
bearing assembly. Bearing Assembly Made in U.S.A. of
domestic and imported parts. |
|
|
QK3064
Center Bearing Kit for 1994-2002 Dodge Cummins
Diesel or Heavy-Duty Gas Ram 2500 and Ram 3500 series 3/4 ton and 1 ton trucks
include new center bearing, Slinger, Retainer, 2 Special
Bolts, driveshaft boot clamps, and threadlocker. Fits
both 4x4 and 4x2
trucks. $104.97 |
|
 |
QU40128 Rear Driveshaft
Boot Kit for 1994-2002 Dodge 2500 and 3500 Trucks.
Includes slip yoke boot and two clamps. Boot Made in
U.S.A. or Brazil. Clamps Made in Canada. $24.96 |
|
|
|
DOWNLOAD!
from
4x4repairmanuals.com
NEW! Color
Illustrated
Tech Service Bulletin TSB3506
Center Bearing Replacement
Also Available:
11 other Driveshaft Downloads plus print manuals! |
|
|
Torque King®
Rear
Driveshaft Universal Joint Kits
for 1994-2002 Dodge Ram 2500 and Ram 3500 Trucks |
|
Detail showing triple-lip internal seal used on our
superior Torque King®
Cold-Forged, non-greaseable U-Joints (Outer
plastic seal/deflector removed for clarity)
|
QK3033
1994-02 2500, 3500 with 2 Piece Rear Shaft
Torque King®
Rear Drive Shaft Universal Joint Kits for 1994-2002
Dodge Cummins Diesel Trucks Each
kit includes 2 or 3 Torque King®
Cold-Forged, Alloy Steel, non-greaseable universal joints,
2 Boot Clamps, and 1 Strap and Bolt set, plus, you can
order your Kit with or without optional 20 page TM3316
External Snap Ring Single Cardan U-Joint & Driveshaft
Service with over 80 color photographs plus color
exploded views. QK3033 also includes
Threadlocker for the Center Bearing Bolts.
Torque King®
non-greaseable universal joints with their
factory synthetic lubricant and superior seals trap air
under pressure during assembly which helps keep
contaminants out, plus the rugged Torque King®
cold-forged design makes these Kits the preferred choice
for Cummins Diesel trucks. Made in U.S.A. except
boot clamps Made in Canada |
|
TK3002 Torque King®
Cold Forged 2 Joint Kit for 1994-2002 Ram 2500 &
Ram 3500 Trucks with
one-piece driveshaft $84.97 |
|
|
TK3033 Torque King®
Cold Forged 3 Joint Kit for 1994-2002 Ram 2500 &
Ram 3500 Trucks with
two-piece driveshaft $122.97 |
|
|
Standard-Duty Universal Joint Kits
for 1994-2002 Dodge Ram Full Size Trucks |
|
QK3001
2 Joint Kit for 1994-2002 |
Standard-Duty
Rear Drive Shaft Kits for your Dodge
truck. Each
kit includes 2 or 3 universal joints, one Strap/Bolt Set and
Threadlocker, plus, you can order your QK3001 or QK3032 Kit with
or without optional 20 page TM3316
External Snap Ring Single Cardan U-Joint & Driveshaft
Service with over 80 color photographs plus color
exploded views. QK3001 and QK3032 also include 1 Driveshaft Boot
Clamp.
Made in U.S.A. Tech Note: If you have a
truck with the Cummins Diesel, we recommend you chose
our Torque King®
Cold Forged
u-joints for maximum life.
|
|
QK3001 Hot Forged 2 Joint Kit for 1994-2002 Ram 2500 & Ram 3500
Trucks $48.97 |
|
|
QK3032 Hot Forged 3 Joint Kit for 1994-2002 Ram 2500 & Ram 3500 Trucks $68.97 |
|
|
|
|
SLIP YOKE QUADKITS
|
Typical Slip Yoke Kit |
Rear Driveshaft Slip Yoke Kits. Each
kit includes yoke, u-joint, seal or clamp for boot, strap kit
and Threadlocker. Use these kits if the driveshaft splines are still
serviceable. Made in U.S.A.
|
DOWNLOAD!
from
4x4repairmanuals.com NEW!
Color
Illustrated
Tech Service Bulletin TSB3507
Driveshaft Slip Yoke Service
Also Available:
11 other Driveshaft Downloads plus print manuals! |
|
|
|
Rear Driveshaft Parts for
1970-1993 Dodge Trucks |
|
 |
|
QU40709
U-Joint Strap and Bolt Set for 1994-2002 Dodge Diesel
rear driveshafts
(This Set is included in all the
Torque King®
Master Rebuild Kits and Standard-Duty
U-Joint Kits sold above) $9.95 |
|
|
Driveshaft
Boot Clamp |
QU40084
Boot Clamp for the large (Slip Yoke) end of slip yoke
boots used on 1994-2002 Dodge Diesel rear driveshafts $3.97
(This clamp is included in all the
Torque King®
Master Rebuild Kits sold above) |
|
| QU40133 Boot Clamp for the
small (Slip Stub) end of slip yoke boots used on Dodge
rear driveshafts from 1994 to 2004 $3.97
(This clamp is included in all the
Torque King®
Master Rebuild Kits sold above) |
|
|
|
|
Torque King®
Universal Joint |
TK40705 Torque King®,
cold-forged, alloy steel, non-greaseable factory
synthetic-lubed u-joints with External Snap Rings for the
1994-2002 Rear
Driveshafts in Dodge Ram 2500 and 3500 Trucks. $39.95 |
|
| TK40722
Torque King®,
cold-forged, alloy steel, non-greaseable factory
synthetic-lubed rear driveshaft universal joint with
internal c-clips for
1994-1999 Dodge Gas engine light duty trucks (2-5/8"
between yoke ears).
$32.95 |
|
|
|
Greaseable U-Joints
Available in 2 Sizes for 1994-2002
Dodge Rear Driveshafts |
QU40789 hot-forged, standard duty, alloy steel, greaseable u-joints
for the 1994-2002 Ram 2500 and Ram 3500 with External Snap
Ring Rear Driveshafts Dan the Gear Man Tech
Note: Although inexpensive, Hot-forged u-joints are Not
Recommended for Diesel Rear Driveshaft Applications. $18.95 |
|
|
QU40775 Heavy-Duty hot-forged, alloy steel, greaseable
rear driveshaft
u-joints
for 1994-1999 Dodge gas engine, light duty trucks (2-5/8"
between yoke ears). $18.95 |
|
|
|
|
|
|
|
|
|
|
|
Link to
Our Dodge Driveshaft Page (2003-UP) |
|
|
|
|
|
A Peek at QUAD Country |
South Central Montana Sunrise
Photo taken from the hill behind the QUAD 4x4 Building |
|
|
copyright © 2006-2007 4x4
Tech, Inc. All rights
reserved.
23 Turner Rd, Roberts, MT 59070 • 406-446-2427
Please send product questions, comments, and suggestions to
dan@quad4x4.com |
