QUAD 4 x4 Your 4x4 Experts!
23 Turner Rd., Roberts, Montana 59070
 CALL  406-446-2427
Order 24 hours a day.  7 days a week. 

Center Bearing Kits for 1989-1993 model year Dodge Diesel trucks Replace that loose, worn, or squeaky center bearing on your 2 or 4 wheel drive Dodge truck with a genuine original equipment replacement bearing assembly. Bearing Assembly Made in U.S.A. of domestic and imported parts. 

QK3063 Center Bearing Kit for 1989-1993 Dodge  Cummins Diesel 250 and 350 series 3/4 ton and 1 ton trucks include new center bearing, driveshaft boot clamps, and threadlocker. Fits both W series 4x4 and D series 4x2 trucks.  

QU40128 Rear Driveshaft Boot Kit for 1989-1993 Dodge Diesel Trucks.  Includes slip yoke boot and two clamps. Boot Made in U.S.A. or Brazil. Clamps Made in Canada.

Detail showing triple-lip internal seal used on our superior Torque King® Cold-Forged, non-greaseable U-Joints  (Outer plastic seal/deflector removed for clarity)

TK3038

Torque King® Rear Drive Shaft Universal Joint Kits for 1989-1993 Dodge Cummins Diesel Trucks Each kit includes 2 or 3 Torque King® Cold-Forged, Alloy Steel, non-greaseable universal joints, 2 Boot Clamps,  and 2 Strap and Bolt sets, plus, you can order your Kit with or without optional 20 page TM3316 External Snap Ring Single Cardan U-Joint & Driveshaft Service with over 80 color photographs plus color exploded views. QK3037 also includes Threadlocker for the Center Bearing Bolts.  Torque King® non-greaseable universal joints with their factory synthetic lubricant and superior seals trap air under pressure during assembly which helps keep contaminants out, plus the rugged Torque King® cold-forged design makes these Kits the preferred choice for Cummins Diesel trucks.  Made in U.S.A. except boot clamps Made in Canada

TK3038 Torque King® Cold Forged 2 Joint Kit for 1989-'93 Dodge Diesels with one-piece driveshaft

QK3001
2 Joint Kit for 1989-1993

Standard-Duty Rear Drive Shaft Kits for your Dodge truck.  Each kit includes 2 or 3 universal joints, one Strap/Bolt Set and Threadlocker, plus, you can order your QK3001 or QK3032 Kit with or without optional 20 page TM3316 External Snap Ring Single Cardan U-Joint & Driveshaft Service with over 80 color photographs plus color exploded views. QK3001 and QK3032 also include 1 Driveshaft Boot Clamp. Made in U.S.A. Tech Note:  If you have a 1989-1993 truck with the Cummins Diesel, we recommend you chose our Torque King® Cold Forged u-joints for maximum life.  

QK3069 Hot-Forged 2 Joint Kit for 1970-1993 gasoline trucks with small internal c-clip u-joints (measure 2-1/8" between yoke ears)

QK3070 Hot-Forged 3 Joint Kit for 1970-1993 gasoline trucks with small internal c-clip u-joints (measure 2-1/8" between yoke ears)

Typical Slip Yoke Kit

U-Joint Strap
& Bolt Set

QU40729 U-Joint Strap & Bolt Set with special small head, hardened bolts for attaching the driveshaft to your rear axle pinion yoke and transfer case output yoke on all 1992 and prior Dodge applications using small internal c-clip u- joints (yokes measure 2-1/8" between the ears).

QU40709 U-Joint Strap and Bolt Set for 1989-1993 Dodge Diesel rear driveshafts

QU40084 Boot Clamp for the large (Slip Yoke) end of slip yoke boots used on 1989-1993 Dodge Diesel rear driveshafts.  $3.97  

Greaseable U-Joints
Available in 3 Sizes for 1970-1993 Dodge  Rear Driveshafts

QU40789 hot-forged, standard duty, alloy steel, greaseable  u-joints  for the 1989-1993 D/W250 and D/W350 with External Snap Ring Rear Driveshafts Dan the Gear Man Tech Note:Although inexpensive, Hot-forged u-joints are Not Recommended for Diesel Rear Driveshaft Applications 

QU40751 hot-forged, standard duty, alloy steel, greaseable u-joints  for the 1970-1993 Dodge trucks with internal c-clip u-joints (measure 2-1/8" between yoke ears). 

QU40775 Heavy-Duty hot-forged, alloy steel, greaseable rear driveshaft u-joints for 1992-1993 Dodge gas engine trucks (2-5/8" between yoke ears).

QU40795 Slip Yoke Seal for 1975½-1986 Dodge 4x4 Rear Driveshafts with the original 1-1/4" - 16 spline slip yoke.

LINKS TO OUR OTHER DODGE DRIVESHAFT PAGES

1975-1993
Front CV Drive Shaft

LINK TO OUR
FRONT CONSTANT VELOCITY DRIVESHAFT REBUILD KIT &
Individual Part Web Page
for 1975½-1993 Full Size Dodge Trucks

1994-2002
Front CV
Drive Shaft

LINK TO OUR
FRONT CONSTANT VELOCITY DRIVESHAFT REBUILD KITS &
Individual Parts Web Page
1994-2002 Full Size Dodge Ram Trucks

LINK TO OUR
REAR DRIVE SHAFT PAGE
1994-2002 FULL SIZE DODGE TRUCKS