|
|
|
|
|
WHEEL SEAL TOOLS |
|
Wheel Seal Installer Plate
Installer #-- National Seal #
QT1501P--417158 ('72-'93)
QT1502--4250
QT1503--9864S
QT1504--471271
QT1510--417158 ('94-'02)
Installer#--CR Seal #
QT1505--27471 |
Wheel Seal Installers Quit wrecking those wheel
seals with a hammer! QuadTool™ Professional Wheel Seal Installers
will install those important wheel seals without damage and to
the proper depth. Precision CNC machined from durable
aluminum for specific wheel seal applications. Perfect for
the truck owner or professional automotive technician that takes
pride in doing the job right the first time! Use
with one of our driver handles. Order these Seal
Installers from our 4x4 Tools
page.
Front Wheel Standard Duty Seal Installer Applications:
QT1502P 1985-93 W150,250 with
Model 44
QT1504P 1980-85 W150,250 with
Model 44
QT1505P 1975-93 W250,350 with
Model 60
Rear Wheel Seal Installer Applications:
QT1500P 1972-93 W200-350 with
Model 70
QT1502P
1977-93 D,W250 with Model 60
QT1503P 1997-99 D,W2500 with
flanged seal
QT1510P 1994-02 D,W2500,
standard seal
|
|
WHEEL BEARING TOOLS |
|
Bearing Cup Installer
Timken Cup#--Installer#
354A--QT1814
362A--QT1805
382A--QT1804
453X--QT1809
2720--QT1818
3920--QT1807
02822--QT1812
11520--QT1819
14276--QT1810
15245--QT1811
18620--QT1821
23256--QT1813
25821--QT1812
28622--QT1800
31520--QT1818
39520--QT1807
45220--QT1806
M88010--QT1820
HM88510--QT1812
HM88610--QT1815
HM89410--QT1818
LM102910--QT1802
JLM104910--QT1801
LM104911--QT1801
NP434567--QT1822
LM501310--QT1802
JLM506810--QT1808
LM603011--QT1803
M802011--QT1823
HM804810--QT1816
NP882000--QT1817
HM903210--QT1816
|
Bearing Cup Installers
Install those critically important and expensive bearing cups
without damaging the precision machined bearing surfaces. Faster, safer, and easier than using a punch. Use in combination
with one of our Driver Handles. Order Cup Installers from
our
Bearing Cup Installer Page
Front Inner Wheel Bearing Cup Installer Applications:
QT1801 1980-93 W150,250 with Model 44
QT1804 1975-93 W250,350 with Model 60
Front Outer Wheel Bearing Cup Installer Applications:
QT1802 1980-93 W150,250 with Model 44
QT1801 1975-93 W250,350 with Model 60
Rear Inner Wheel Bearing Cup Installer Applications:
QT1800 72-02
Most single rear wheel, Mod70
use T1804
QT1806
72-93 D,W300-350 dual rear wheel
QT1807 94-02
D,W3500 dual rear wheel
Rear Outer Wheel Bearing Cup Installer Applications:
QT1801
72-93
all ¾ and 1 T, 94-02 single wheel
QT1808 94-02 D,W3500 dual rear wheel
Front Axle Inner Pinion Bearing Cup Installers
QT1818 1960-2002 Ramcharger, ½ ton, ¾ ton with Dana 44
front axle
QT1805 1977-2002 ¾ ton, 1 Ton with Dana 60 solid front drive
axle.
Front Axle Outer Pinion Bearing Cup Installers
QT1812 1960-2002 Ramcharger, ½ ton, ¾ ton with Dana 44
front axle
QT1812 1977-2002 ½ ton, ¾ ton with Dana 60
Rear Axle Inner Pinion Bearing Cup Installers
QT1805 1957-2002 ¾ ton, 1 ton with Dana 60
QT1806 1957-early 1984 1 Ton Truck with Dana 70
QT18051984-2002 ¾ ton, 1 ton with Dana 70
QT1806 1994-2002 ¾ ton, 1 ton with Dana 80
Outer Rear Axle Pinion Bearing Cup Installers
QT1812 1957-2002 ¾ ton, 1 ton with Dana 60
QT1812 1957-2002 ¾ ton, 1 Ton with Dana 70
QT1823 1994-2002 ¾ ton, 1 Ton with Dana 80
NP205 Transfer Case Idler Gear Cup Installer
QT1818 1967-1993 All with 205
Transmission Bearing Cup Installers
QT1823 1992-2005 NV4500 Input
QT1802 1992-2005 NV4500 Countershaft Front
|
 |
Installer
Driver Handles For use with a variety of QuadTool™ Seal
and Bearing Installers. Made in U.S.A..
Order Driver
Handles from our 4x4 Tools Page
QT1100
8" Handle for general purpose use
QT1101
14" Handle for axles & transmissions
QT1102
47" Handle for inner axle seals |
|
SPINDLE & AXLE SHAFT NUT SOCKETS |
 |
Front Axle Shaft Nut Socket
for 1974-1979 Ramcharger, 1974-1979 W150/250, 1994-2001 1500-3500,
and 2002-2009 2500 and 3500 Dodge Ram 4x4
trucks. Use this pro-quality, 1/2" drive impact socket for
removing/installing the front axle shaft nut when servicing the
front wheel bearings, ball joints, axle u-joints, &
differential. Made in U.S.A.
|
QT1008Axle
Shaft Nut Socket
$74.98
or Save $5
by purchasing
Online for only $69.98! |
|
|
 |
QT1012 4 Prong Front Spindle Nut Sockets are used
on 1980-1993 W150-W250 trucks and Ramchargers.
QT1018 89½-93 W250,350 with Mod 60
For pricing and to order, go to
our 4x4 Tools Page |
|
QT1013
2.5" Hex Spindle Socket
|
Front & Rear Spindle Hex Nut Socket
2.5" hex 1/2" drive spindle nut socket works on many 1950's-1989
Dodge 1/2-1 ton front and 1960-1978 3/4-1 ton rear axles.
(Please note: This socket fits all true 2.5" nuts, however,
some trucks came with poorly stamped nuts that are slightly
oversize. You can still use this socket by either grinding the
excess off your OE nuts, slitting the socket so it will expand
slightly, or by replacing the nuts with a set of QU40052 true
2.5" spindle nuts.) Made in U.S.A.
| QT1013 2.5" Hex Spindle
Nut Socket $36.95 |
|
|
 |
Rear Spindle Nut Socket
for 1979-2002 3/4 & 1 ton rear axles. Easily remove/install the
rounded hex spindle nut on your Dodge. Required whenever wheel
bearing service or adjustment is needed. 1/2" drive. Made in
U.S.A.
For pricing and to order,
go to our 4x4 Tools Page
QT1009
Rounded Hex Spindle Nut Socket |
|
AXLE TOOLS |
|
Inner pinion Bearing Installer |
Pinion Bearing Installers
Quickly and easily install inner pinion bearings without
damaging the bearing or pinion. Made in U.S.A.
For pricing and to order, go to
our 4x4 Tools Page
QT1003
Dana Model 70
QT1004
Dana Model 80
|
|
T1002
Right Side Axle Seal Installer
|
Inner Axle Seal Installers make installing
those hard to reach front inner axle shaft seals easy without
damaging the seal! Very versatile, Can be used with slide
hammers, pulling screws, driver handles, or hammers. Designed
specifically for use with original equipment type inner axle
seals as sold by us. May not work with competitive brands of
seals. Made in U.S.A. To order any of the installers
listed below, please see our
Front Axle
Shaft Seal Tools Webpage.
Ramcharger Left Side: 1988-1993
W150, W250 (Gas Engine) Left Side: 1998-1993
Ram 1500 Right Side: 1994-2001
Ram 2500LD Right Side (Gas engine) 1994-1999 |
T1002
or
T1114 |
Ramcharger: 1977½-1984
Ramcharger Right Side: 1985-1993
W150, W250: 1977½-1984
W150, W250 Right Side (Gas Engine): 1985-1993
Ram 1500 Left Side: 1994-2001
Ram 2500 Left Side: 1994-1999
Ram 3500 Left Side: 1994-1999 |
T1029
or
T1084 |
Ramcharger: 1974-1977
W100, W250: 1972½-1977 |
T1041
or
T1165 |
W250 w/Cummins Diesel: 1989-1993
W300, W350: 1975-1993 |
T1042
or
T1156 |
Ram 2500 Right Side with CAD Axle: 2000-early 2002
Ram 3500 Right Side with CAD Axle: 2000-early
2002 |
T1070 |
Ram 2500 Left Side with CAD Axle: 2000-early 2002
Ram 3500 Left Side with CAD Axle: 2000-early 2002
Ram 2500, 3500 w/o CAD: 2002 |
T1071 |
W300 w/Model 70 Axle: 1967-1975
W600 w/Model 70 Axle: 1974-1978 |
T1138 |
| Ram 2500, 3500 (AAM Axle): 2004-Current |
T1143 |
|
Call us for
Installers for other Dodge applications |
|
|
 
QT1034 Step Plate |
Step Plates are used
when pulling and/or installing your differential bearings.
These plates fit in the axle shaft hole of your differential.
Use as a push plate for bearing removal or to support the
differential when pressing on new bearings. Made in U.S.A.
For pricing and to order, go to
our 4x4 Tools Page
QT1034
fits Model 60-70-80 rear axles on all 3/4 and 1 ton trucks
1969-2002 plus all older models using these axles. Also
fits Dana 60 and 61 front axles on all 1976 and newer 350/3500
trucks to 2002 and all 250/2500 Cummins Diesel trucks
QT1035
fits all 1959-2002 front axles on Ramcharger, W150, 1500, trucks
and light duty W250, 2500 models with the model 44 front
axle
|
|
BALL JOINT PRESS SET |
|
TS1065SET
Ball Joint Press Set
TS1082 Press Set
|
DOWNLOAD!
from
4x4repairmanuals.com
NEW!
Color
Illustrated
Tech Service Bulletin TSB4586
4x4 Dodge Truck Ball Joint
Service 9.25 AAM Axle
Includes
22
Color photos,
detailed
service procedures and torque specifications.
|
|
Ball Joint Press Tool Sets Specifically designed to make
the task of changing the ball joints on your Dodge RAM truck
easy and safe. Long throat design will handle the job! (Unlike
standard, short throat presses offered by MAC, OTC, and others)
This pro-quality Press Set includes cast iron long reach ball
joint press, 2 receivers, one installer, and press stub.
Optional tooling is available for other applications. Made in
U.S.A.
TS1065 works on all 2000-02 2500 and 3500 4x4 trucks with
the Dana 60 Front Axle or 3500 4x2 model with the heavy duty
solid front axle.
TS1082 fits all 2003-up 2500 and 3500 4x4 trucks.
These trucks all are equipped with the American Axle
Manufacturing 925 front axle. This set includes the press and 6
adapters. It will remove and install the ball joints plus
press on the lower ball joint seal.
TS4511 services all 1994-1999 Ram 2500 and
Ram 3500 4x4 trucks with the Dana 60
Front Axle (including ALL Diesel and V10
trucks and all V8 gasoline trucks over 8800#
GVWR)
|
|
 |
Visit Our
Ball Joint Press Tools Page for Ball Joint Press Sets and
Individual Tools |
|
|
|
|
TRANSMISSION TOOLS (click
here for NV4500 tools) |
 |
NV5600 Fill Plug Wrench removes/installs the
large fill plug on NV5600 6 speed transmissions.
| QT2012 Fill Plug Wrench
for NV5600 6 speed $15.95 |
|
|
|
ENGINE TOOLS |
 |
Cummins Rear
Crankshaft Seal Kit Quickly & easily replace
that leaky rear crankshaft seal on your 1989-'03 Cummins engine
without damaging the new seal! No need to remove the
flywheel housing or seal adapter! Includes installer tool,
guide studs, self tapping screws, drill bit, new
Teflon lip seal with seal starter, Threadlocker, anti-seize. Made in U.S.A.
TS6000
For pricing and to order,
go to our
Dodge Engine & Clutch Page |
|
QT3001
Barring Tool |
Barring Tool Manually crank over your Cummins Engine the easy way with this
nifty 1/2" drive pro quality barring tool. Engages flywheel
through access hole in right side of your flywheel housing.
You'll use this tool when performing valve adjustment, automatic
transmission removal, or any other job requiring precise
crankshaft rotation. Not for impact use.
Made in U.S.A.
| QT3001 Barring Tool for
Cummins Engine $109.95 |
|
|
|
CLUTCH TOOLS |
|
Clutch Alignment Tools
|
Clutch Alignment
Tools are an essential tool when installing a clutch to
center the clutch hub to the pilot bearing. Plastic installers are the same as included in our clutch kits.
Made in U.S.A.
1989-2005 Dodge 250, 350, 2500, and 3500 trucks with the Cummins
Diesel or gas V10 using the NV4500 5 speed and 1998-2000 trucks
with the NV5600 6 speed all used 1-1/4" 10 spline input shafts
with 3/4" pilots
|
QT3010 Cummins Diesel or V10 1-1/4" 10 spline
$7 |
|
2001-2005½ 6 Speed All Dodge
2500, 3500 trucks with the NV5600 6 speed have an 1-3/8" 10
spline clutch hub and a 3/4" pilot.
|
QT3016 Cummins Diesel or V10 1-3/8" -10 spline $7 |
|
|
|
TRANSFER CASE TOOLS |
 |
NP205 Transfer Case Dummy
Shaft is required to hold the idler shaft bearings, shims, and
sleeve together when removing or installing the idler shaft on
New Process 200, 201, and 205 transfer cases. Made in U.S.A.
For pricing and to order, go to
our 4x4 Tools Page |
|
SUSPENSION TOOLS |
 |
Lower Track Bar Tools |
