Parts for 1985 to 1993 Dodge and Plymouth Full Size 4x4s with Dana 44 Front Drive Axles
Page is still under construction, more parts will be added soon!
Axle Identification
Dana Axle ID Tag
Click to enlarge 		All 1985-1993 Dodge Dana-Spicer Model 44 Front Axles in Dodge Ram trucks had a Bill of Material Number (BOM) stamped on a Build Tag (red arrow) attached to the differential by two of the differential cover bolts (yellow arrows) when the vehicle was shipped from the factory. The BOM number is a 6 digit number beginning with a 6 plus a dash number (ex: 610604-2). They can be used to determine not only the axle model, but also what components the axle was originally built with. We often ask for this number to insure we provide you with the exact parts you need for your truck.

Each different BOM number signifies an engineering part change which may be minor or major and may involve one or more parts. Unfortunately, these tags are often missing on trucks that had prior differential service dash number indicates the axle ratio. Available Axle Ratios were 3.23, 3.54, 3.92, and 4.09

  

Click to enlarge 		Cover: 10 Bolt, 10-3/8" high  
  Suspension: Leaf spring  
  Ball Joints: Pressed in Steering Knuckle, nuts at top.  
     
     
     
Check Out Now
Axle Assemblies and Axle Housings
  Sorry, No Axle Housings or Axle Assemblies in Stock at this time!  
     
     
     
     
     
     
Check Out Now
Axle Shafts
     
     
     
     
     
     
     
Check Out Now
Axle Shaft Seals and Seal Kits
     

Click to enlarge		 QK4848 Inner Axle Seal Kit for 1988-1993 easily installs those tight fitting axle shaft oil seals on your 1988-1993 W150 or gas engine, light duty W250 with Dana Model 44 Axle and Central Axle Disconnect (CAD).  Makes seal installation easy and almost fool-proof.  Full kit includes 2 each left and right axle seals, 2 seal installers, 150,000 psi tensile strength alloy steel threaded rod with Grade 8 hardware, rod guide, & CAD gasket.  Our special seal installers support these difficult to install seals in 3 locations and are machined out of solid steel.  Inner Axle Seal Kit Fits all 1988-1993 W150 1/2 ton and gas powered, light duty W250 3/4 ton Dodge 4x4 Trucks.  Precision Machined Installers to allow adjustment of seal depth for worn inner axles.
$155.99 or Save 3% by purchasing Online for only $149.99  


Click to enlarge QK4849 Right Side Only Inner Seal Kit Right Side for all 1988-1993 W150 1/2 ton and gas powered, light duty W250 3/4 ton Dodge 4x4 Trucks.  Includes right seal installer, axle end plate, hardened press rod, grade 8 hardware, 2 right inner axle seals, & CAD gasket.  Precision Machined Installers to allow adjustment of seal depth for worn inner axles.
$105.99 or Save 3.5% by purchasing Online for only $99.99    


QU40105 Left Inner Axle Shaft Seal for 1988-1993 Dodge Ramcharger, W150, W250 Dana 44 Front Axles is a genuine original equipment NOK brand seal used for the Left Axle Seal located next to the Central Axle Disconnect (CAD) Unit.
QU40083 Left Inner Axle Shaft Seal for 1985-1987 Dodge Ramcharger, W150, W250 Dana 44 Front Axles fits the end of the left axle housing tube. The matching Bearing is QU50155.
QU40159 1985-1993 Dodge Dana 44 Right Inner Axle Shaft Seal A genuine original equipment NOK brand seal used as the Right Axle Shaft Seal located next to the differential on 1985-1993 Dodge Ramcharger, W150, and W-250 4x4s.
     
Check Out Now
Axle Universal Joints
We offer three different Universal Joints for your hard working 1985 to 1993 4x4 Dodge Ramcharger, Plymouth Trailduster or W-150, W250 4x4 Truck with a Dana 44 solid front axle. All are good, reliable products, but different manufacturing techniques and seal types will have a major influence on the ultimate life of the joint. Our most popular choice is our TK40712 cold-forged, non-greaseable, original equipment replacement U-Joint. The wear-resistant cold-forged cross and superior sealing make it the best choice for both low maintenance and long life. QU40754 and QU90007 are hot-forged and are equipped with single lip seals. They are greaseable through a flush fitting threaded into one of the caps. With good maintenance and quality lubricant like our Pyroplex® Plus Grease, these joints will last and last. Click on the Part Number Links to see our individual product pages for more info. Link to Vehicle Make or Category Links
QU40754 1985-1993 Dodge Ram Dana 44 Greaseable Front Axle Shaft U-Joint is a heavy-duty, hot-forged, Greaseable front axle shaft universal joint with metal backed seals for increased resistance to water contamination. This low-cost, but durable part is one of our most popular axle u-joints.
QU90007 Greaseable Axle U-Joint with Rubber Seals for 1985-1993 Dodge Ram Dana 44 Front Axles Value priced with Hot-Forged cross and flexible rubber seals.
TK40712 Premium Torque King® Cold-Forged Non-Greaseable Axle U-Joint for 1985-1993 Dodge Ram Dana 44 Front Axles is a premium, quality factory lubed universal joint for your heavy-duty 4x4 TK40712 is our best selling u-joint for this application because it combines the strength of a solid, cold-forged cross with excellent seals and a maintenance free, factory-lubed design that meets or exceeds all original equipment specifications.
     
     
     
Check Out Now
Ball Joints
     
QU40187 Original Equipment Ball Joint Set for 4x4 Bolt Front Axles are the current production original equipment, factory lubed,

Upper and Lower Ball Joints with hardware for 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles.
     
     
     
     
     
Check Out Now
Brake Parts
     
     
     
     
     
     
     
Check Out Now
Central Axle Disconnect (CAD) Parts
     
QU50155 Left Inner Axle Shaft Support Bearing for 1985 to 19936 Dodge Ram Dana 44 Front Axles with CAD fits at the end of the left axle housing tube on 1982 to 1984 full size Jeep models with the vacuum controlled Central Axle Disconnect (CAD) system. The matching Oil Seal is QU40083.
     
     
     
     
     
Check Out Now
Differential and Pinion Bearings (Individual)
All 1985 to 1993 Dodge Ramcharger, Dodge W-150 1/2 ton truck , Dodge W-250 3/4 ton truck, and Plymouth Trailduster with open knuckle Dana 44 Central Axle Disconnect (CAD) Front Axles use the same differential and pinion bearings.
All bearings are not created equal for fit or durability, so we only stock first class, long lasting, Timken® Differential and Pinion Bearings for your Dana front axle. Timken® was and is a a major original equipment supplier of top-notch bearing components to Dana Spicer. Since I first started rebuilding Dana axles in the mid 1970's, I have found Timken® Bearings to be the most consistent in relation to the published dimensions of any bearing on the market which makes rebuilding an axle right the first time a WHOLE lot easier! 		Link to Our Dodge Web Page Index
QU50533 Timken® Outer Pinion Bearing Cup for 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles.
QU50534 Timken® Outer Pinion Bearing for 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles.
QU50535 Timken® Inner Pinion Bearing Cup for 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles.
QU50536 Timken® Inner Pinion Bearing for 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles.
QU50538 Timken® Differential Side Bearing for 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles. (uses 2)
QU50537 Timken® Differential Side Bearing Cup for 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles. (uses 2)
Check Out Now
Differential Bearing and Seal Kits
     
     
     
     
     
     
     
Check Out Now
Differential Parts
     
     
     
     
     
     
     
Check Out Now
Gaskets and Gasket Makers
     
QU40214 Dana 44 Cover Gasket is a genuine original equipment Dana Gasket for all Dana-Spicer Model 44 axles.
S82194 Ultra Gray RTV Sealant combines high adhesion and resistance to both conventional and synthetic gear lubes. The perfect choice to seal the differential cover on your Dodge Ram front axle.
     
Check Out Now
Hubs and Hub Parts
     
     
     
     
     
     
     
Check Out Now
Manuals and Technical Information
     
     
     
     
     
     
     
Check Out Now
Miscellaneous Parts
     
     
     
     
     
     
     
Check Out Now
Pinion Seals and Pinion Yokes
     
QU40215 Dana 44 Front Axle Pinion Seal is a genuine original equipment pinion seal for all 1985-1993 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 CAD front axles.
     
     
     
     
     
Check Out Now
Ring and Pinion Kits
     
     
     
     
     
     
     
Check Out Now
Small Parts
     
     
     
     
     
     
     
Check Out Now
Spindles and Spindle Nuts
     
  QU40313D Spindle Kit for 1988-1993 W150, W250
 
 
 
 
     
Check Out Now
Spindle Bearings and Seals
     
     
     
     
     
     
     
Check Out Now
Steering Knuckles and Steering Linkage Parts
     
     
     
     
     
     
     
Check Out Now
Tools
     
TS4620 Inner Axle Seal Tool Set for 1988-1993 easily installs those tight fitting axle shaft oil seals on your 1988-1993 W150 or gas engine, light duty W250 with Dana Model 44 Axle and Central Axle Disconnect (CAD).  Makes seal installation easy and almost fool-proof. Complete kit Include 2 seal installers, 150,000 psi tensile strength alloy steel threaded rod with Grade 8 hardware, and rod guide.  Our special seal installers support these difficult to install seals in 3 locations and are machined out of solid steel. Made in U.S.A.

Please refer to TS4620 page for more details and ordering information.  
TS4631 Right Side Only Inner Axle Seal Tool Set for all 1988-1993 W150 1/2 ton and gas powered, light duty W250 3/4 ton Dodge 4x4 Trucks. Makes seal installation easy and almost fool-proof.  Made in U.S.A.

Please refer to TS4620 page for more details and ordering information.  
QT1002 Seal Installer for the right side inner axle seal located next to the CAD unit. Part of QK4620/ QK4631 and TS4620/ TS4631 Installation Kits. Essential for installing your right side seal without damage.

Please refer to QT1002 page for more details and ordering information.
QT1029 Seal Installer for the left side inner axle seal located next to the differential. Part of QK4620 and TS4620 Installation Kits. Essential for easy and trouble free installation of your left axle shaft seal.

Please refer to QT1029 page for more details and ordering information.
QT1047 Axle End Plate is made to fit 1994-2001 Dodge Axles with 2-1/8" Axle Tube inside diameters. 5/8" ID center hole. Part of QK4620/ QK4631 /QK4698 and TS4620/ TS4631 Installation Kits.

Please refer to QT1047 page for more details and ordering information.
QT1136 SEAL INSTALLER, DEPTH STOP Part of QK4698 Installation Kit.

QT1190 SEAL INSTALLER, DEPTH STOP Part of QK4698 and TS4620/ TS4631 Installation Kit.

     
Check Out Now
Wheel Bearings and Seals (Individual)
     
     
     
     
     
     
     
Check Out Now
Wheel Bearing and Seal Kits
     

Click to enlarge		 QK4752 1985-93 W150-250 with Model 44 Front Axle
$133.87 or Save 3% by purchasing Online for only $129.95


     
     
     
     
     
Check Out Now