Parts and Tools for 1980-1984 Dodge Ram 4x4s with Dana 44 Front Drive Axles
Page still under Construction, more parts will be added in near future!
Axle Assemblies and Housings
  Sorry, No Axle Housings or Axle Assemblies in Stock at this time!  
     
     
     
     
     
     
Check Out Now
Axle Identification
     

Click to enlarge 		Cover: 10 Bolt, 10-3/8" high  
  Suspension: Leaf spring  
  Ball Joints: Pressed in Steering Knuckle, nuts at top.  
     
     
     
Check Out Now
Axle Shafts
     

  a

  a

  a
   

 
Check Out Now
Axle Shaft Inner Seals and Seal Kits
     
 

 

  
 

 

  
     
Check Out Now
Axle Universal Joints
We offer three different Universal Joints for your hard working 1980 to 1984 4x4 Dodge Ramcharger, Plymouth Trailduster or W-150, W250 4x4 Truck with a Dana 44 solid front axle. All are good, reliable products, but different manufacturing techniques and seal types will have a major influence on the ultimate life of the joint. Our most popular choice is our TK40712 cold-forged, non-greaseable, original equipment replacement U-Joint. The wear-resistant cold-forged cross and superior sealing make it the best choice for both low maintenance and long life. QU40754 and QU90000 are hot-forged and are equipped with single lip seals. They are greaseable through a flush fitting threaded into one of the caps. With good maintenance and quality lubricant like our Pyroplex® Plus Grease, these joints will last and last. Click on the Part Number Links to see our individual product pages for more info. Link to Vehicle Make or Category Links
TK40712 Torque King® Premium Non-Greaseable Axle U-Joint for 1980-1984 Dodge Dana 44 Front Axles Original equipment type universal joint with Premium Cold-Forged cross and superior pressure-type seals.

QU90007 Greaseable Axle U-Joint with Rubber Seals for 1980-1984 Dodge Dana 44 Front Axles Value priced with Hot-Forged cross and flexible rubber seals.
QU40754 Greaseable Axle U-Joint with Metal Backed Seals for 1980-1984 Dodge Dana 44 Front Axles with Hot-Forged cross and metal backed rubber seals.
Check Out Now
Ball Joints
     
QU40187 Original Equipment Ball Joint Set for 4x4 Bolt Front Axles are the current production original equipment, factory lubed,

Upper and Lower Ball Joints with hardware for 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
     
     
     
     
Check Out Now
Brake Parts
     
     
     
     
     
     
     
Check Out Now
Differential & Pinion Individual Bearing Cups & Cones
All 1980 to 1984 Dodge Ramcharger, Dodge W-150 1/2 ton truck , Dodge W-250 3/4 ton truck, and Plymouth Trailduster with open knuckle Dana 44 Front Axles use the same differential and pinion bearings.
All bearings are not created equal for fit or durability, so we only stock first class, long lasting, Timken® Differential and Pinion Bearings for your Dana front axle. Timken® was and is a a major original equipment supplier of top-notch bearing components to Dana Spicer. Since I first started rebuilding Dana axles in the mid 1970's, I have found Timken® Bearings to be the most consistent in relation to the published dimensions of any bearing on the market which makes rebuilding an axle right the first time a WHOLE lot easier! 		Link to Our Dodge Web Page Index
QU50533 Timken® Outer Pinion Bearing Cup for 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU50534 Timken® Outer Pinion Bearing for 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU50535 Timken® Inner Pinion Bearing Cup for 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU50536 Timken® Inner Pinion Bearing for 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU50538 Timken® Differential Side Bearing for 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles. (uses 2)
QU50537 Timken® Differential Side Bearing Cup for 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles. (uses 2)
Check Out Now
Differential Bearing & Seal Kits Featuring Genuine Dana-Spicer Parts
     
     
     
     
     
     
     
Check Out Now
Differentials and Differential Parts
     
     
     
     
     
     
     
Check Out Now
Gaskets and Gasket Makers
     
QU40214 Dana 44 Cover Gasket is a genuine original equipment Dana Gasket for all Dana-Spicer Model 44 axles.
     
Check Out Now
Hubs and Hub Parts
     
     
     
     
     
     
     
Check Out Now
Manuals and Technical Service Bulletins
     
     
     
     
     
     
     
Check Out Now
Miscellaneous Parts
     
     
     
     
     
     
     
Check Out Now
Pinion Yokes and Pinion Seals
     
QU40215 Dana 44 Front Axle Pinion Seal is a genuine original equipment pinion seal for all 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
     
     
     
     
Check Out Now
Ring and Pinion Kits
     
     
     
     
     
     
Check Out Now
Small Parts
     
 
     
     
     
     
     
Check Out Now
Spindles and Spindle Nuts
     
QU40004 Inner Spindle Nut for 1980-1984 Plymouth Trailduster, Dodge Ramacharger, W-150, W-250 Dana 44 Front Axle threads on the spindle and fits against your outer wheel bearing to provide correct wheel bearing end-play.  
 
   
   
     
Check Out Now
Spindle Bearings and Seals
The dead spindle design of the 1980-1984 Dodge Dana 44 front axle uses a needle bearing to support the outer axle shaft. To protect the bearing and control axial thrust, a 4 piece set consisting of an Axle Shaft Slinger, Large V-Seal, Small V-Seal, and Thrust Washer was used. We have both Kits and individual exact replacement Dana-Spicer Spindle small parts for your hard-working 1980-1984 Dodge or Plymouth 4x4.
Link to Vehicle Make or Category Links
QK4734 Front Axle Shaft Spindle Bearing Set fits 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles. One bearing is pressed into each spindle to support the outer axle shaft.
QU40056 Small Spindle to Axle Shaft V-Seal is a genuine original equipment 1-5/16" ID Rubber V-Seal that is installed in your spindle between QK4734.5 Spindle Bearing and QU40070 Spindle Thrust Washer. Fits 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU40070 Axle Shaft to Spindle Thrust Washer is a genuine original equipment plastic thrust washer that controls axial thrust between your outer axle shaft and spindle. Fits 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU40071 Large Axle Shaft to Spindle V-Seal is a genuine original equipment 2.25" ID Rubber V-Seal that seals between your axle shaft and spindle. Fits 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QK4739 Spindle Seal Kit services both sides on 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU40228 Spindle Bearing and Seal Kit services one side 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
QU40058 Outer Axle Shaft Slinger acts both as a crud deflector and a sealing surface on open knuckle axles. Replace anytime they are dinged, bent or badly corroded. Fits 1980-1984 Dodge Ramcharger, W-150, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle front axles.
Check Out Now
Steering Knuckles
     
     
     
     
     
     
     
Check Out Now
Steering Tie Rods
     
     
     
     
     
     
     
Check Out Now
Tools
     
 

 

  
 


 
 



 
 

 
 

 
     
     
Check Out Now
Wheel Bearings and Seals (Individual)
     
     
     
     
     
     
     
     
     
Wheel Bearing and Seal Kits
     

Click to enlarge		 QK4707 Master Wheel Bearing Kit & Tools 80-85 W150-250 with Model 44 Front Axle.
$275.97 or Save 3% by purchasing Online for only $267.95



Click to enlarge		 QK4743 1980-85 W150-250 with Model 44 Front Axle
$129 or Save 3.25% by purchasing Online for only $124.95


     
     
     
     
     
     
     
     
notes
Content for id "montanalore" Goes Here