|
Special Service Tools for
Your Ford SUV or Truck |
|
|
|
|
|
Maintain and repair your Ford
4x4 with the right tool for the job. Whether you are a
shade tree mechanic or a top notch professional automotive
technician, you will find our ever expanding selection of 4x4
service tools has the hard to find tools you need to keep your
Ford SUV or truck in peak operating condition! For
general service tools or tools to service a competitive
brand of 4x4's,
click on the appropriate link above. |
|
T1515
Knuckle Seal Installer for 1999-2004 Ford
Super Duty
|
DOWNLOAD!
from
4x4repairmanuals.com
NEW!
Color
Illustrated
Tech Service Bulletin TSB4610
1999-2004 4x4 Ford Super
Duty Front Axle Shaft Service
Includes
detailed
axle shaft and knuckle seal service procedures and torque specifications!
Check out our other download and print titles too! |
|
Super Duty Knuckle Seal Installer easily
installs those fragile, expensive axle shaft to knuckle seals on the outer axle shaft
and is also used to seat the seal and shaft assembly into the
steering knuckle to the correct depth. This is a heavy
duty, CNC machined tool designed to work on all 4x4 1998½
to 2004 Super Duty F250, F350, F450, and F550 front
axles. One piece design for ease of use. Made in U.S.A.
Weighs over 11 lbs. For quantity purchases and online discounts,
check out:
4x4tools.com For Kits with this tool and the knuckle
seals look on our
Ford 1998-2004 Super Duty page!
|
T1515 Knuckle Seal Installer $149.97
|
|
Pressing Knuckle seal on Outer Axle Shaft.
Drive or press seal on until T1515 bottoms against axle shaft.
Seal will be at proper location
on axle shaft |
Seating Axle Shaft in Knuckle with T1515.
Tool stops when seal is at
correct depth |
|
|
Knuckle Seal Installers for 2005-up Ford Super Dutys
(left) T1530 (fits F250, F350)
(right) T1531 (fits F450, F550) |
2005-UP Super Duty 4x4 Knuckle Seal Installers easily
install those fragile, expensive axle shaft to knuckle seals on the outer axle shaft
and is also used to correctly seat the seal and shaft assembly into the
steering knuckle at the correct depth. Heavy
duty, CNC machined tools are built to last. T1530 works on
2005 and newer F250 and F350 trucks. Use our QT1531 on
your 2005-up Super Duty F450 and F550 front
axle. One piece design for ease of use. Made in U.S.A.
QT1530 weighs about 14 lbs., QT1531 tips in at about 17 pounds. For quantity purchases and online discounts,
check out: 4x4tools.com For Kits with this tool and the knuckle
seals look on our
Ford
2005-up Super Duty Front Axle Page!
| QT1530 Knuckle Seal Installer
2005-up Ford Super Duty F250, F350 $179.97
|
| QT1531 Knuckle Seal
Installer 2005-up Ford Super Duty F450, F550 $199.97
|
|
 |
Front Axle Shaft Puller for 1999-2004
Super Duty trucks attaches to any 5/8" fine
thread* Slide Hammer. Will quickly and easily remove
your front axle shafts. This is the only tool on the
market that allows you to remove the axle shaft without beating
on the big knuckle seal pressed on the outer axle shaft.
(*SAE National Fine, 18 threads per inch.)
Made in U.S.A.
| QT1123 Super Duty Front
Axle Shaft Puller $79.97 |
|
|
|
 |
Lockout Hub Puller for 1999-2004 Super Duty 4x4 trucks will make removing those
stuck-in-place, tapered body, factory lockout hubs a cinch!
Push tool over lockout hub. Tighten Clamp Bolt.
Attach Slide Hammer and remove hub quickly and without damage!
Use with any 5/8" fine thread* Slide Hammer.
(*SAE National Fine, 18 threads per inch.)
Made in U.S.A.
| QT1124 Super Duty Lockout
Hub Puller $59.97 |
|
|
|
|
|
QK4647
Super Duty Inner Axle Seal Remover Set
Super Duty Front
Axle Kits and Parts Web Page |
Inner Axle Seal Remover Set is a real timesaver! Driver
slips through the axle shaft seal guides and knocks out
those tricky inner axle shaft seals in a flash! This Inner Axle
Oil Seal Remover for 1999-2004 Ford Super Duty 4x4 trucks lets
you easily remove the front axle shaft oil seals without
removing or damaging the fragile plastic axle tube guides.
Space saving two piece rod threads together for right seal
removal. Use just the long rod for knocking out the left
seal. Optional adapters available to remove almost
all monobeam drive axle inner seals from 1940's to present. Kit
includes drive rod, extension rod, seal remover, and lock nut.
Made in U.S.A.
| QK4647 Inner Seal Remover Set
$79.97
|
|
QK4647 Assembled to Remove Seal from Right Axle Tube |
|
|
Spindle Nut Sockets |
|
4 Prong Spindle Nut Socket
|
4 Prong Front Spindle Nut Sockets are available in two
sizes
|
QT1012 Small 4 Prong Socket Fits Ford 1978-1996
Full Size Bronco Early Bronco (to 1977), All F100, 1973-1996 F150
(except 1995-1996 with auto hubs),
and light F250 from 1960-1988 All with 4 slot double nut set or single ratchet
spindle nut. ORDER from our 4x4 Tools Page |
|
QT1018 Heavy-Duty, Large 4 Prong Socket fits 1981-1997
F250 and F350 trucks (except 1985-1997 with Ford Automatic
Hubs and hex spindle nuts) These tucks have Dana 50 and 60 axles
with 4 slot double nut/washer set or single ratchet spindle nut. ORDER
from our 4x4 Tools Page |
|
QT1059 |
Small Rounded Hex Socket removes and
installs the spindle nuts on 1984-1992 Ford Ranger and Bronco II
4x4's equipped with factory automatic locking hubs. Also fits
older 3/4 ton Dodge and Jeep trucks with 2-3/8" rounded hex rear
spindle nuts. 1/2" Drive. Made in U.S.A.
| QT1059 Small Rounded Hex Socket $19.97
|
|
|
|
QT1057 |
Medium Rounded Hex Spindle Nut Socket fits
1995 and 1996 Ford F-150 and Full Size Bronco with factory
installed automatic locking hubs. 1/2" Drive. Made in
U.S.A. $20.97
| QT1057 Medium Rounded Hex Spindle Nut Socket
Out of Stock. $20.97
|
|
|
|
QT1058 |
QT1058 Large Rounded Hex Spindle Nut Socket fits 1985 to1997 Ford F-250
and F-350 4x4 trucks with with factory installed automatic
locking hubs. 1/2" Drive. Made in U.S.A.
|
QT1058 Large Rounded Hex Spindle Nut $22.97
|
|
|
|
|
More Hub Tools |
|
QT1163
Ranger Hub Puller |
QT1163 Vacuum Hub Release Tool for Ford
Ranger 4x4's. Allows damage-free removal of the vacuum
actuated plastic hubs found on mid-size Ranger pickups. Includes
the Puller and special clips to release the auto hub from the
wheel hub. Use with 5/8" SAE Slide hammer like our QT9302
sold on our 4x4 Tools Page. Made
in U.S.A. OUT OF STOCK.
| QT1163 Vacuum Hub Release Tool $79.97
|
|
|
|
|
Wheel Seal Installers
Quit wrecking those wheel seals with a hammer! QuadTool™
Standard & Pro Duty Wheel Seal Installers are precision machined
for specific wheel seal applications. Use our inexpensive high
impact plastic Standard Duty installers for occasional
use. Choose our aluminum Pro Duty installers for frequent
seal installation.
| QT1502 1973-95
All w/Model
44 Front Axles $29
|
Rear
| QT1502 1973-95
most with Model
60 $29
|
|
|
Bearing Cup Installer
Timken Cup#--Installer#
354A--QT1814
362A--QT1805
382A--QT1804
453X--QT1809
2720--QT1818
3920--QT1807
02822--QT1812
11520--QT1819
14276--QT1810
15245--QT1811
18620--QT1821
23256--QT1813
25821--QT1812
28622--QT1800
31520--QT1818
39520--QT1807
45220--QT1806
M88010--QT1820
HM88510--QT1812
HM88610--QT1815
HM89410--QT1818
LM102910--QT1802
JLM104910--QT1801
LM104911--QT1801
NP434567--QT1822
LM501310--QT1802
JLM506810--QT1808
LM603011--QT1803
M802011--QT1823
HM804810--QT1816
NP882000--QT1817
HM903210--QT1816
|
Bearing Cup Installers
Install those critically important and expensive bearing cups
without damaging the precision machined bearing surfaces. Faster, safer, and easier than using a punch. Use in combination
with one of our Driver Handles. Order Cup Installers from
our 4x4 Tools Page.
Front Inner Wheel Bearing Cup Installer Applications:
QT1803
1959-1986 Bronco, F100, F150 with model 30 & 44 axles
QT1803
1987-1991 Bronco, F-150 with LM603011 Cup
QT1801
1987-1991 Bronco, F-150 with LM104911 Cup
QT1803 1992-1996 Bronco, F150
QT1803 1959-1976 F-250 with internal spline hub & model
44 axle
QT1805 1959-1977½ F-250 with external 6 bolt hub
QT1801 1976½-1997 F-250 with model 44 axle (internal
spline hub)
QT1804 1977½-1997 F-250, F350 with Model 50 and 60 front
axles
Front Outer Wheel Bearing Cup Installer Applications:
QT1802 1959-86 Bronco, F100, F150
QT1801
1987-1991 Bronco, F-150 with LM104911 Cup
QT1802 1987-1996 Bronco, F150 with LM501310 Cup
QT1802 1959-1997 F-250 with model 44 axle
QT1801 1977½-1997 F-250, F350 with Model 50 and 60 front
axles
Rear Inner Wheel Bearing Cup Installer Applications:
Rear Outer Wheel Bearing Cup Installer Applications:
Front Axle Inner Pinion Bearing Cup Installers
QT1818 1959-1997 All with Dana 44
front axle
QT1805 1977-up ¾ ton, 1 Ton with Dana 60 solid front drive
axle.
Front Axle Outer Pinion Bearing Cup Installers
QT1812 1959-1997 all with Dana 30 and 44
front axle
QT1812 1977-2002 ½ ton, ¾ ton with Dana 60
Rear Axle Inner Pinion Bearing Cup Installers
QT1805 1967-up ¾ ton, 1 ton with Dana 60, 61
QT1806 All with Dana 70HD, 70B
QT18051982-up ¾ ton, 1 ton with Dana 70U
Outer Rear Axle Pinion Bearing Cup Installers
QT1812 1959-up ¾ ton, 1 ton with Dana 60
QT1812 1959-up ¾ ton, 1 Ton with Dana 70
QT1823 1988-up ¾ ton, 1, 1¼ Ton with Dana 80
NP205 Transfer Case Idler Gear Cup Installer
QT1818 1973-1979 All with 205
Transmission Bearing Cup Installers
|
 |
Installer
Driver Handles For use with a variety of QuadTool™ Seal
and Bearing Installers. Made in U.S.A..
Order from our 4x4 Tools page.
QT1100
8" Handle for general purpose use.
QT1101
14" Handle for axles & transmissions.
QT1102 47" Handle for inner axle seals.
|
| |
|
| |
|
QT2013 |
NP205 Transfer
Case Dummy Shaft is required to hold the idler shaft bearings,
shims, and sleeve together when removing or installing the idler
shaft on New Process 200, 201, and 205 transfer cases. Made in U.S.A.
QT2013 Order from our 4x4
Tools page
|
|
TRANSMISSION QUADTOOLS™ |
QT2031 |
Borg Warner T18,
T19, & T98 Transmission Dummy Shaft is used to hold the
counter shaft needle bearings, spacers, sleeve, and thrust
washers in place when servicing Borg Warner T18, T19, & T98 four
speed transmissions found on many 1950's to 1980's Ford trucks
with 4 speed transmissions. Made in U.S.A.
QT2031
Order from our 4x4 Tools page |
|
Clutch Alignment Tools
|
Clutch Alignment
Tools are an essential tool when installing a clutch to
center the clutch hub to the pilot bearing. Standard duty
plastic installers are the same as included in our clutch kits.
Solid steel, professional duty installers are the best choice
for the heavy clutches typically found on diesel and V10 powered
pickups. Standard duty installers are Made in U.S.A.
Pro duty installers are Made in U.S.A. from either domestic or
imported steel.
QT3012 fits almost all Ford 6 cylinder and small block V8
applications in Broncos and F series pickups from 1965 to
present with 3, 4, or 5 speed transmission. Also fits 6.9l
Diesel 1983-1987 and all 460's with 4 speed transmission.
1-1/16", 10 spline with .670" pilot.
|
QT3012 Ford
1-1/16" 10 spline Clutch Tool $7
|
QT3013 Fits 1987-02 Ford F250 and F350 with 7.3l Diesel,
460 (7.5l) big block V8 or the gas V10 with 5 speed
transmissions.
|
QT3013 Ford Diesel or Big Block 1-1/4" 10 spline $7
|
|
|
AXLE QUADTOOLS™ |
QT1003 |
Pinion Bearing Installers
Quickly and easily install inner pinion bearings without
damaging the bearing or pinion. Made in U.S.A.
Order from our 4x4 Tools page
QT1003 Dana Model 70
QT1004 Dana Model 80
|
 |
Inner Axle Seal Installers
make installing those hard to reach front inner axle shaft seals
easy without damaging the seal! Can be used with slide
hammers, pulling screws, driver handles, or hammers. |
 
|
Step Plates are used when pulling and/or installing your
differential bearings. These plates fit in the axle shaft
hole of your differential. Use as a push plate for bearing
removal or to support the differential when pressing on new
bearings. Made in U.S.A.
Order from our
4x4 Tools page
QT1034 fits Model
60-70-80, Ford 10.25" and GM 14 bolt
QT1035 fits Model 44
axles
QT1036
fits Ford 9" axles
|
| |
Pinion Bearing Cup Installers
|
| |
|
|
A Well Camouflaged Mountain Grouse or "Fool Hen" in the
Beartooths |
