Hardware and Fasteners
We stock a good selection of hard to find hardware items including U.S.A. made, lot certified, high strength bolts, nuts, and washers. Often the difference between a fair job and a great job is in the small details, things like using fasteners that meet or exceed orginal equipment specs instead of the unsafe counterfeit hardware so often sold by hardware stores.
Bolts, Hex Head Metric
     
     
     
     
     
 
Bolts, Hex Head SAE Fine Thread
     
     
     
     
 
Bolts, Hex Head USS Coarse Thread
     
     
     
     
 
Bolts, Flange Head Metric
     
     
     
     
 
Bolts, Flange Head SAE and USS
     
     
     
     
 
Hex Nuts, Metric
     
     
     
     
 
Hex Nuts, Metric Lock
     
     
     
     
 
Hex Nuts, SAE
     
QU95017 5/8" Grade 8 SAE Fine Thread Hex Nut

Link to our QU95017 Large Text Product Page
     
     
     
 
Hex Nuts, SAE All Metal Locking

Click to Enlarge
Our heat treated, lot certified, USA made, Class C Locknuts have 150,000 psi minimum proof strength and are designed to be used with matching Grade 8 fasteners. This type of nut resists loosening even when subjected to severe vibration. Plated for corrosion resistance. Meets IFI and ANSI specifications.
 
QU95033 1/4" SAE Class C Lock Nut for Grade 8 applications. Fine thread Locknut has 1/4"-28 threads
     

QU95035 3/8" SAE Class C Lock Nut for Grade 8 applications. Fine thread Locknut has 3/8"-24 threads

Link to our QU95035 Large Text Product Page

QU95036 7/16" SAE Class C Lock Nut for Grade 8 applications such as spindles and rear axle shaft studs. Fine thread Locknut has 7/16"-20 threads

Link to our QU95036 Large Text Product Page

QU95037 1/2" SAE Class C Lock Nut for Grade 8 applications. Fine thread Locknut has 1/2"-20 threads

Link to our QU95037 Large Text Product Page

     
     
  Dan the Gear Man Safety Note: Class C Locknuts are NOT recommended for use where the temperature will exceed 450° F (232°C)!  
 
Hex Nuts, USS
     
     
     
QU95006 5/8" Coarse Thread Grade 8 Hex Nut. Sold individually.
QU95007 3/4" UNC Coarse Thread Grade 8 Hex Nut. Sold individually.
  QU95008 7/8" Coarse Thread Grade 8 Hex Nut. Sold individually.
     
     
 
Hex Nuts USS Locking
     
     
     
     
     
     
     
 
Hose Clamps
     
     
     
     
     
 
Miscellaneous
QU95079 5/32x1.5 Cotter Key
     
     
     
 
O-Rings and Square Rings
QU50551 O-Ring
     
     
     
 
Roll Pins
     
     
     
     
     
 
Sheet Metal Screws
     
     
     
     
     
     
     
 
Snap Rings
     
     
     
     
     
     
     
 
Washers, Copper
     
     
     
     
     
     
     
 
Washers, Metric Flat
     
     
     
     
     
     
     
 
Washers, Metric Lock
     
     
     
     
     
     
     
 
Washers, SAE Flat
  180,000 PSI Rated Hardened and Tempered, Lot Certified, SAE Flat Washer with smooth bearing surfaces. Thickness runs a little heavier than standard SAE Flat Washers Sold individually.  
     
     
  QU95047 180,000 PST SAE Flat Washer
Inside Diameter: 25/64" Outside Diameter: 13/16", Thickness: 0.086" +/- 0.007"
     
QU95049 1/2" Grade 8 SAE Flat Washer
  QU95050 9/16" Grade 8 SAE Flat Washer
Inside Diameter: 41/64" Outside Diameter: 1-5/16", Thickness: 0.148" +/- 0.012"
QU95051 5/8" Grade 8 SAE Flat Washer
Inside Diameter:
QU95052 3/4" Grade 8 SAE Hardened Flat Washer Made in U.S.A.
  Extra Thick, High Strength Flat Washers are a thru-hardened, USA made, Grade 8, 150,000 PSI rated Flat Washer with outside diameters that match standard SAE sizing. Sold individually.  
QU95058 3/8" Extra Thick, High Strength Flat Washer
Inside Diameter: 13/32" Outside Diameter: 13/16", Thickness: 0.125" +/- 0.008"
     
 
Washers, USS Flat
     
     
     
     
     
     
     
 
Washers, Lock
     
     
     
     
     
     
     
 
Washers, Lock
     
     
     
     
     
     
     
 
notes
Content for id "montanalore" Goes Here