Front Axle Shaft Seal Tools and Kits

Our custom made, Front Inner Axle Seal Tools are used every day by professional shops, fleets, and Do-It-Yourself truck owners world wide. On most beam type 4x4 front axles, the axle shaft oil seals are located next to the differential. The seals are installed in bores machined into the inner ends of the axle tubes, so the ONLY way to replace them is to disassemble the axle and remove the differential. Removing the seals is relatively simple, using either one of our special tool sets or a suitable substitute inserted from the outer ends of the axle tubes to drive the seals out of the bores. Next, you clean out the gunk and crud from the axles tubes and from inside the diff housing. Installing the seals, which are usually pretty fragile, is simple and straight forward-IF you use one of our custom made tool sets. Our tools are designed to quickly and easily install original equipment type seals without damaging the seal or you. The alternative is to try and install the seals with a socket and hammer which often results in wrecking expensive seals, bashing your fingers, and leaking blood all over the place. 

Inner Axle Seal Kits that Fit Multiple Vehicle Makes

top_page
product note

Our high quality, U.S.A. made, precision machined Seal Installers are perfected to slip on to the original equipment seals like a glove. They will not fit on most aftermarket seals due to construction differences in the seals. The complete QK Series Tool Kits listed below also include the correct seals for each installer. Make your Inner Axle Seal replacement job quick and painless, order the correct Tool Kit for your axle today!

photo

QK4656 1975-1997 Dana 60 Adjustable Depth Front Inner Axle Tool and Seal Kit for 1975-1997 Dana 60 beam front axles without vacuum controlled Central Axle Disconnect. QK4656 works on 1975-1993 Dodge, 1977-1991 Chevy/GMC, 1977.5-1997 Ford, and 1975 IHC 3/4 and 1 ton trucks equipped with Dana 60 or 61 Front Axles. Includes 2 Spicer/NOK brand Axle Seals, Seal Installer, alloy steel Press Screw with Hardware, and Thrust Plate. More Info
See TS4656 for Tool Set Only

$165.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4867 Fixed Depth 1975-1997 Dana 60 Front Inner Axle Seal and Tool Kit Includes genuine original equipment Dana-Spicer axle shaft seals and the special tools you need to quickly and easily install the QU40059 Inner Axle Seals to a precise depth in all Chevy, Dodge, Ford, GMC, and International 4x4 trucks with open knuckle Dana 60 and Dana 61 front drive axles with King Pins. Our unique installer design will press in your new Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. More Info
See TS4867 for Tool Set Only

$169.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4871 1955-1988 Dana 44 Inner Axle Seal Kit with Fixed Depth Tool Set Quickly and easily installs QU40055 Inner Axle Seals to a precise depth in most 1950's to late 1980's Chevy, Dodge, Ford, GMC, International, and Jeep 4x4s with Dana 44 closed and open knuckle front drive axles. Our unique installer design will press in your new Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so the force is only applied on the steel seal shell. More Info
See TS4871 for Tool Set Only

$144.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4872 1955-1988 Dana 44 Front Inner Axle Seal Kit with Adjustable Depth Tool Set Quickly and easily installs QU40055 Inner Axle Seals in 1950's to 1980's vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. More Info
See TS4872 for Tool Set Only

$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal and Tool Kits for Chevy and GMC

top_page
product note

The Kits listed in this section are for Chevrolet and GMC Four Wheel Drive vehicles. Each Kit includes the correct installation tools and inner axle seals for specific 1960-1991 GM built full size 4x4s. GM used Dana 44 front axles for all 1960-1976 4x4s. In 1977, the Dana 60 was introduced for the new factory 1 ton GM 4x4. Also, during the 1977 model year, GM's own 10 bolt front axle was released for some axle ratios in Blazer/Jimmy, 1/2 ton, and 3/4 ton models. Both the Dana 60 and GM 10 bolt would endure through the 1991 model year, but the Dana 44 was phased out and completely dropped by GM after 1980.

photo

QK4872 1960-1980 GM Dana 44 Front Inner Axle Seal Kit with Adjustable Depth Tool Set Quickly and easily installs the included QU40055 Inner Axle Seals in 1960 to 1980 Chevy and GMC 4x4s with Dana 44 front axles. Our unique installer design will press in these new Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. More Info
Just need the Tool Set? See TS4872

$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4871 1960-1980 GM Dana 44 Front Inner Axle Seal Kit with Fixed Depth Tool Set Quickly and easily installs the included QU40055 Inner Axle Seals to a precise depth in 1960 to 1980 Chevy and GMC 4x4s with Dana 44 closed or open knuckle front drive axles. Our unique installer design will press in these new Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so the force is only applied on the steel seal shell. More Info
Just need the Tool Set? See TS4871

$144.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4656 1977-1991 GM 1 Ton Dana 60 Adjustable Depth Front Inner Axle Tool and Seal Kit for 1977-1991 Chevy and GMC K30, K35, K3500, and V3500 4x4 1 ton Dana 60 beam front axles. Adjustable depth tool design allows you to easily and quickly install the included seals to miss worn or rusty areas in your axle shafts giving you the flexibility to seat the seals at the optimum depth for long life. More Info
Just want the Tool Set? See TS4656!

$165.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4867 Fixed Depth 1977-1991 GM Dana 60 Front Inner Axle Seal and Tool Kit Includes genuine original equipment Dana-Spicer axle shaft seals and the special tools you need to quickly and easily install the QU40059 Inner Axle Seals to a precise depth in all 1977-1991 Chevy and GMC K30, K35, K3500, V3500 1 ton 4x4 trucks Dana 60 front axles. Our unique installer design will press in these new Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. More Info
Just want the Tool Set? See TS4867!

$169.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4811 Front Inner Axle Seal Kit for GM 10 Bolt Front Axles with installation tools and a pair of seals is the quick and easy way to replace your recessed GM 10 Bolt front inner axle shaft oil seals. Our unique installer design will press in these new Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Adjustable Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. QK4811 works on all 1977½ - 1991 All K and V Series ½ Ton and ¾ Ton and Full Size Blazers and Jimmys with GM 10 Bolt Front Axles. More Info
See TS4811 for Tool Set Only

$146.36
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Kits for Dodge, Plymouth, Ram, and Sterling

top_page
product note

The Kits listed in this section are for Dodge, Plymouth, Ram, and Sterling Four Wheel Drive vehicles. Each Kit includes the correct installation tools and inner axle seals for specific Chrysler built 4x4s.

photo

QK4872 1957-1984 Dodge Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seals in 1957 to 1984 Dodge, Plymouth, and Ram 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. More Info

Also See TS4872 Tool Set only, or See QK4871 for Fixed Depth Option.

$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4656 1975-1993 Dodge Dana 60 or Dana 61 Adjustable Depth Front Inner Axle Tool and Seal Kit for 1975-1993 Dodge and Dodge Ram W200, W250, W300, W350 4x4 trucks with either Dana 60 or Dana 61 front axles. Adjustable depth tool design allows you to easily and quickly install the included seals to miss worn or rusty areas on your axle shafts giving you the flexibility to seat the seals at the optimum depth for long life. More Info

$165.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4620 Adjustable Depth Front Inner Axle Seal Kit for Both Sides of Dodge Ram 4x4s with 1988-2001 Dana 44 or 1994-1999 Dana 60 CAD Front Axles Successfully installing the inner axle shaft oil seals on 1994 to 2001 Dodge Ram 1500 4x4 trucks and 1994 to 1999 Dodge Ram 2500 and Ram 3500 4x4 trucks with vacuum controlled Central Axle Disconnect (CAD) can really raise your blood pressure if you do not have the right tools for the job. Our QK4620 Kit for both left and right seals makes inner axle oil seal installation easy and almost fool-proof on your Dodge Ram 4x4 equipped with the factory (CAD) system. Our special, CNC Precision Machined, solid steel Seal Installers support these difficult to install seals in 3 locations so the seal cannot cock or get crushed during installation. Also available is QK4631 CAD side only Kit. More Info

$169.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4621 2000-2002 Dodge Ram 2500, Ram 3500 Dana 60 Inner Axle Shaft Seal and Tool Kit for CAD Fits 2000-2002 Dodge Ram 2500 and Ram 3500 with vacuum controlled Central Axle Disconnect (CAD). Kit includes installation tool set and original equipment CR brand Seals for both sides. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.  Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. Also available are left only and right only Seal and Tool Kits.  More Info

$189.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4802 2002 Ram 2500, Ram 3500 without CAD Inner Axle Oil Seal and Tool Kit to install both the left and right Inner Axle Shaft Seals for all mid to late 2002 model year Dodge Ram 2500 and Ram 3500 4x4 trucks without vacuum controlled Central Axle Disconnect (CAD). Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.  Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. More Info

$165.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4685 Inner Axle Seal Installer Kit for 2003-2018 Dodge Ram AAM 9-1/4" Front Axles installs the Inner Axle Seals on 2003-2018 AAM 925 front beam axles used in all Ram 2500, Ram 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.  Precision CNC made installation tools are specifically made to quickly and easily install the included QU10945 Genuine AAM Axle Seals to the correct depth without damaging, cocking, or crushing the rather delicate seals or your Axle Adjuster Threads which are machined in the housing. Our QK4685 Kit makes inner axle oil seal installation easy and almost fool-proof on your Dodge Ram 4x4 equipped with the AAM 9-1/4" 14 Bolt front axle!

$179.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Kits for Ford

top_page
product note

The Kits listed in this section are for Ford four wheel drive vehicles. Each Kit includes the correct installation tools and inner axle seals for specific Ford built 4x4s. For Ford Dana 60 Axles, the Axle Seal Kits will fit more applications than those they were originally cataloged for.

QK4983 2011-current Kit is actually a nearly universal fit Kit that can be used to install QU20463 Oil Bath Seal without an axle shaft guide in ALL 1978-1979 and 1985 to current Dana 60 and Super 60 axles.

QK4644 Adjustable Depth and QK4807 Fixed Depth 1999-2010 Kits will install QU40244 Oil Bath Seal with an axle shaft guide in all 1999 to current Ford Dana 60 and Super 60 Axles.

QK4656 Adjustable Depth and QK4867 Kits are specific to 1991 and prior years to install QU40059 standard Axle Shaft Seal, however, they will also work to install QU40059 seal in Ford Dana 60 front axles through the 1997 model year.

photo

QK4872 1959-1978 Ford Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seal in 1959 to 1978 Ford 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.  Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts.

Also See TS4872 Tool Set only, or See QK4871 for Fixed Depth Option.

$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4656 1978-1997 Ford Dana 60 Adjustable Depth Front Inner Axle Tool and Seal Kit for 1978-1979 Ford F250 or F350 and 1985-1997 Ford F350 4x4 trucks with Dana 60 front axles. Adjustable depth tool design allows you to easily and quickly install the included seals to miss worn or rusty areas on your axle shafts giving you the flexibility to seat the seals at the optimum depth for long life. More Info

$165.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4982 Dana 50 Adjustable Depth Inner Axle Seal Kit with 2nd design inner axle seals and adjustable depth installer tool set is made specifically to install the 2nd design seals in 1999-2005 Ford Excursion and 1999-2002 Super Duty 4x4's with the Dana 50 Front Axle. Our Installer will quickly and easily press in these new Inner Axle Seals without damage because the installation tool cups the seal so force is only applied on the outer shell. More Info
For Ford Excursion and 1999-2004 Super Duty® trucks, we offer our optional, color illustrated, step-by-step Tech Service Bulletin TSB4643. The seals & installer is different in this Tech Service Bulletin, but the procedures are the same.

$186.75
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4643 Adjustable Depth Inner Axle Seal Kit for 1999-2005 Ford Dana 50 Monobeam Front Axles will quickly and easily press in new Inner Axle Seals without damage in 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion 4x4s with Dana 50 monobeam front axles because the installation tool cups the seal so force is only applied on the outer shell. Kit includes (2) Axle Shaft Seals, Dana 50/60 Adjustable Depth Axle Seal Installer, Dana 50 Axle Thrust Plate, and Press Screw Assembly. More Info

$213.85
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4808 Fixed Depth Inner Axle Seal Kit for Dana 50 Axles in 1999-2002 Ford Super Duty and 2000-2005 Excursion is specific to Ford Model 50 Monobeam Front Axles. QK4808 Kit with Installation Tools and 2 Axle Shaft Seals will quickly and easily press in new Inner Axle Seals without damage to the original seal depth because the installation tool has a depth stop and it cups the seal so force is only applied on the outer shell.  More Info

$231.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4644 Adjustable Depth Inner Axle Seal and Tool Kit for Dana 60 or Dana Super 60 Axles in 1999-2010 Ford Super Duty includes QU40244 seals with slinger that are specific to 1999-2010, but the same tools and seals work equally well on 2011 to current Dana Super 60 axles in F250, F350, F450, and F550 4x4s.  QK4644 Kit with Installation Tools and 2 Axle Shaft Seals will quickly and easily press in your new Inner Axle Seals without damage because the installation tool cups the seal so force is only applied on the outer shell. More Info

$216.85
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4807 Fixed Depth Inner Axle Seal and Tool Kit for Dana 60 or Dana Super 60 Axles in 1999-2010 Ford Super Duty includes QU40244 seals with slinger that are specific to 1999-2010, but the same tools and seals work equally well on 2011 to current Dana Super 60 axles in F250, F350, F450, and F550 4x4s.  QK4644 Kit with Installation Tools and 2 Axle Shaft Seals will quickly and easily press in your new Inner Axle Seals without damage to a precise depth because the installation tool has a depth stop and it cups the seal so force is only applied on the outer shell. More Info

$234.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4983 Oil Bath Inner Axle Seal and Tool Kit for 2011-Current Ford Super Duty Dana Super 60 Front Axles with Ford design universal fit, Dana 60 oil bath type inner axle seals and adjustable depth installer tool set is specific to 2011-up Ford Super Duty Super 60 front axles, but these excellent seals will also fit 1999-2010 Ford Super Duty 4x4 Dana 60 Front Axles. QK4983 is also the perfect upgrade package for older Ford Dana 60 equipped vehicles including 1978-1979 F250, F350, and 1985-1997 F350 Ford trucks. More Info

$189.75
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Kits for International

top_page
product note

The Kits listed in this section are for International and International Scout four wheel drive vehicles. Each Kit includes the correct installation tools and inner axle seals for specific IHC built 4x4s.

photo

QK4872 1955-1980 International Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seal in 1955 to 1980 International and Scout 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.  Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts.  Made in U.S.A.

Also See TS4872 Tool Set only, or See QK4871 for Fixed Depth Option.

$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Kits for Jeep

top_page
product note

The Kits listed in this section are for Jeep four wheel drive vehicles. Each Kit includes the correct installation tools and inner axle seals for specific Willys, Kaiser, AMC, or Chrysler built Jeep 4x4s. 1982-1996 Jeep Dana front axles with vacuum controlled Central Axle Disconnect use different axle seals and installers for left and right sides. All other applications have identical seals for the left and right axle shafts.

photo

QK4872 1963-1988 Jeep Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seal in most 1962 to 1988 Jeep J-Series full size Wagoneer, Truck, and Cherokee 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.  Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. More Info

Just need the Tool Set? See TS4872

$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4871 1962-1988 Jeep Dana 44 Axle Seal Kit with Fixed Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seals to a precise depth in 1962 to 1988 Jeep J-Series full size Wagoneer, Truck, and Cherokee 4x4s with Dana 44 closed or open knuckle front drive axles. Our unique installer design will press in your new Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so the force is only applied on the steel seal shell. More Info
Just need the Tool Set? See TS4871

$144.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4800 1972-2006 Jeep Dana 30 Front Inner Axle Seal Kit for all 1972-2006 Jeeps with standard Dana 30 or Super 30 solid beam type front axles with no CAD (Central Axle Disconnect). Quickly and easily install those all-important Inner Axle Shaft Seals without damaging the seal! Our unique installer design will press in your new Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. More Info

$129.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QK4601 Inner Axle Shaft Seal Kits for 1984-1987.5 Jeep Front Axles with Vacuum Controlled Central Axle Disconnect (CAD) on 1984-1987.5 Jeep Cherokee and Wagoneer (XJ) and 1986 Jeep Wrangler (YJ) models. The passenger side axle shaft seals on these models are almost impossible to install without our installation tools. QK4601 is for both sides. Also Available is QK4602 Right Side Only. More Info

$168.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4624 Inner Axle Shaft Seal Kits for 1987-1996 Jeep Front Axles with Vacuum Controlled Central Axle Disconnect (CAD) on 1987.5-1991 Jeep Cherokee (XJ), Jeep Comanche,  and 1987-1996 Wrangler (YJ) models. The passenger side axle shaft seals on these models are almost impossible to install without our installation tools. QK4624 is for both sides. Also Available is QK4801 Right Side Only. More Info

$161.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4932 Front Inner Axle Shaft Seal Kit for All 2007-2017 Jeep JK Wranglers with Super 30 Front Axles Makes short work of installing new inner axle shaft seals in your 2007-2017 Wrangler JK. Quickly and easily install those all-important Inner Axle Shaft Seals without damaging the seal! Our unique installer design will press in your new Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. Kit includes two axle shaft oil seals and Install Tool Set. Already have the Seals and just need the Tools? See TS4932 for Tool Set only. More Info

$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4822 Adjustable Depth Inner Axle Seal Kit for 2003-2017 Jeep Wrangler Rubicon with Dana 44 Front Axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.  Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. Already have the seals, See TS4822 for just the Tool Set only. More Info

N/A
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Tool Sets

top_page
photo

TS4685 Inner Axle Tool Set for the AAM 925 Front Drive Axle. Installs the Inner Axle Seals on all 2003-2009 Dodge Ram 2500 and Ram 3500 4x4 trucks. Kit includes QT1143 Seal Installer, QT1193 Thrust Plate, and TS1195 Press Screw Assembly. Specifically made to easily install QU10945 Genuine AAM Axle Seals without damaging the rather delicate seals or your Axle Adjuster Threads which are machined in the housing.

Link to TS4685 Catalog Page

$149.90
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4643 Adjustable Inner Axle Seal Tool Set for Ford 1999-2008 Super Duty & Excursion Model 50 front drive axles. Quickly and easily press in new Spicer/Forsheda inner axle seals without damage! CNC Precision Machined Installation Tools cup the seal so force is only applied on the outer shell. Also Available is TS4808 with Depth Stop.

Link to TS4643 Catalog Page

$136.75
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4644 Adjustable Inner Axle Seal Tool Set For 1999-Current Ford Dana 60 Front Axles includes CNC Precision Machined Installation Tools to service the Inner Axle Oil Seals on 1999 to Current Ford 4x4s with Dana Spicer Model 60 and Super 60 front drive axles. Also Available is TS4807 with Depth Stop.

Link to TS4644 Catalog Page

$139.45
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4871 Dana 44 Inner Fixed Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seal in vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Kit Includes QT1161 Thrust Plate, QT1041 Installer, and QT1189 Press Screw. Made in U.S.A.

Link to TS4871 Catalog Page

$132.94
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4872 Dana 44 Inner Adjustable Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seal in vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. QT1165 Installer tool does not have a depth stop so you can offset the seal to clear a worn spot in the axle shaft, however, for a reference point, you will need to check the depth of the old seals before removing them. Kit Includes QT1161 Thrust Plate, QT1165 Installer, and QT1189 Press Screw. Made in U.S.A.

Link to TS4872 Catalog Page

$124.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4620 Tool Set for both left and right seals make inner axle oil seal installation easy and almost fool-proof on your Dodge Ram 4x4 equipped with the factory vacuum controlled Central Axle Disconnect (CAD) system. Our special, CNC Precision Machined, solid steel seal installers support these difficult to install seals in 3 locations so the seal cannot cock or get crushed during installation. See TS4631 for Right Side Only Option or for Fixed Depth Option, see TS4698.

Link to TS4620 Catalog Page

$145.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4698 Fixed Depth Stop Tool Set is a complete install tool set for both sides. Includes QT1190 Right Seal Installer, QT1136 Left Seal Installer, QT1048 125,000 psi tensile strength alloy steel Press Rod, USA made certified Grade 8 Hardware, and QT1047 Thrust Plate. Available with or without our optional, printed, color illustrated Axle Seal Replacement Tech Service Bulletin TSB4620P. See TS4699 for a Right Side Only Option. Also See TS4620 for Adjustable Depth Tool Kit.

Link to TS4698 Catalog Page

$170.88
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4802 Inner Axle Oil Seal Tool Set is used to install both the left and right Axle Shaft Seals for all mid to late 2002 model year Dodge Ram 2500 and Ram 3500 4x4 trucks WITHOUT Central Axle Disconnect (CAD). CNC Precision Machined Installers allow adjustment of seal depth to compensate for worn inner axles.

Link to TS4802 Catalog Page

$145.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4867 Fixed Depth Type Inner Axle Shaft Seal Tool Set For 1978-1979 Ford F-250, F-350 1 ton 4x4 trucks. Includes QT1156 Fixed Depth Seal Installer, QT1133 Alloy Steel Press Screw with Hardware, & QT1130 Thrust Plate.

Link to TS4867 Catalog Page

$151.45
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4822 Adjustable Depth Inner Axle Seal Installer Tool Set Only For 2003-up Jeep Wrangler Rubicon with Dana 44 Front Axles.

Link to TS4822 Catalog Page

$118.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Installers for Chevy and GMC

top_page
product note

The individual Inner Axle Seal Installers listed in this section are for 1960-1991 Chevrolet and GMC full size four wheel drive vehicles with solid front drive axles. 

photo

QT1041 1960-1980 GM Dana 44 Depth Stop Front Inner Axle Seal Installer Installs Spicer QU40055 current design unitized original equipment SKF/CR front inner axle seal with an integral guide in 1960-1980 GM 1/2 ton and 3/4 ton 4x4s with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. (Also see QT1165 Adjustable Depth Installer) Included in QK4871 Kit and TS4871 Tool Set. More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1165 Adjustable Depth 1960-1980 GM Dana 44 and 1977-1991 GM 10 Bolt Front Inner Axle Seal Installer works to install SKF/CR manufactured Spicer QU40055 inner axle seals on Chevy and GMC 1/2 ton or 3/4 ton 4x4s in 1960-1980 models with Dana 44 axles and 1977-1991 4x4s with GM 10 bolt solid front axle. This tool does not have a depth stop making it suitable for use on both Dana 44 and GM 10 bolt applications, so you will need to check the depth of the old seals before removing them. GM always used a CR seal for the 10 bolt, but many Dana axles were originally equipped with an NOK seal which Spicer has replaced with the CR design. Also see QT1041 Fixed Depth Kit for Dana 44. Included in QK4872 Kit and TS4872 Tool Sets for Dana 44 axles and QK4811 Axle Seal Kit or TS4811 Tool Set for GM 10 Bolt Front Axles. More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1029 Alternate 1978-1980 GM Dana 44 Front Axle Seal Installer is used to install the QU40159 original equipment NOK made seal in 1978-1980 GM 4x4s with the 3" axle tube diameter Dana 44 front axle. Refer to our Dana 44 Axle Seal Tech Article for specific fitments and alternate seals/tools for 1978-1980 axles. QT1029 is included in QK4830 Seal/tool Kit and TS4830 Tool Set. Also see QT1165 Adjustable Depth or QT1041 Fixed Depth Installers that fit CR seals made for the same Application.  More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1042 1977-1991 GM Dana 60 Adjustable Depth Inner Axle Seal Installer Allows you to install the QU40059 Spicer original equipment NOK manufactured inner axle seals on all 1977-1991 GM 1 ton K30/K35/K3500/V3500 Model 60 front axles to different depths. This feature is especially useful when the axle shafts are grooved by the old seals. (Also see QT1156 Fixed Depth Installer.) QT1042 is included with QK4656 Seal/Tool Kit and TS4656 Tool Set.  More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1156 1977-1991 GM Dana 60 Fixed Depth Inner Axle Seal Installer Permits, fast and fool-proof installation of QU40059 Spicer original equipment NOK manufactured inner axle seals on all 1977-1991 GM 1 ton K30/K35/K3500/V3500 Model 60 front axles to a precise depth. (Also see QT1042 Adjustable Depth Installer.)  More Info

$72.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Installers for Dodge, Plymouth, and RAM

top_page
product note

The individual Inner Axle Seal Installers listed in this section are for 1957-current Dodge, Plymouth, and RAM full size four wheel drive vehicles with either Dana-Spicer or AAM solid front drive axles. 1985-2002 Dodge Dana front axles with vacuum controlled Central Axle Disconnect use different axle seals and installers for left and right sides. All other applications have identical seals for the left and right axle shafts.

photo

QT1041 1957-1984 Dodge and Plymouth Dana 44 Depth Stop Front Inner Axle Seal Installer Installs Spicer QU40055 current design unitized original equipment SKF/CR front inner axle seal with an integral guide in 1957-1984 Dodge and Plymouth 1/2 ton and 3/4 ton 4x4s with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time.  Included in QK4871 Seal/Tool Kit and TS4871 Tool Set. More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1165 Adjustable Depth 1957-1984 Dodge or Plymouth Dana 44 Front Inner Axle Seal Installer works to install SKF/CR manufactured Spicer QU40055 inner axle seals on Plymouth Trailduster and 1957-1984 Dodge 1/2 ton or 3/4 ton 4x4s with Dana 44 axles. This tool does not have a depth stop so you will need to check the depth of the old seals before removing them.   Included in QK4872 Seal/Tool Kit and TS4872 Tool Sets for Dana 44 axles.  More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1138 Dana 70 Closed Knuckle Adjustable Depth Inner Axle Seal Installer for 1958-1978 Dodge 4x4s Installs the Dana Spicer original equipment QU40382 Inner Axle Seals in 1958-1974 Dodge W300 and 1974-1978 Dodge W600 4x4 trucks with Dana Spicer Model 70 closed knuckle front axles. More Info

$54.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1042 1977-1993 Dodge Dana 60 and Dana 61 Adjustable Depth Inner Axle Seal Installer Allows you to install the QU40059 Spicer original equipment NOK manufactured inner axle seals on all 1975-1993 Dodge Dana 60 and 1987-1993 Dana 61 front axles to different depths. This feature is especially useful when the axle shafts are grooved by the old seals. (Also see QT1156 Fixed Depth Installer.) QT1042 is included with QK4656 Seal/Tool Kit and TS4656 Tool Set.  More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1156 1975-1993 Dodge Dana 60 Fixed Depth Inner Axle Seal Installer Permits, fast and fool-proof installation of QU40059 Spicer original equipment NOK manufactured inner axle seals on all 1975-1993 Dodge Dana 60 and 1987-1993 Dana 61 front axles to a precise depth. (Also see QT1042 Adjustable Depth Installer.)  More Info

$72.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1029 Dodge 1977-2001 Dana 44 and 1994-1999 Dana 60 Adjustable Depth Front Axle Seal Installer Fits multiple Dodge applications using  QU40159 Spicer original equipment NOK made seal. For 1977-1984 Dana 44 axles with 3" diameter axle tubes, QT1029 is used to install the seals for both left and right sides. On 1985-1993 Dodge Dana 44 axles with vacuum controlled Central Axle Disconnect, QT1029 installs the RIGHT axle shaft seal. On 1994-2001 Dana 44 and 1994-1999 Dana 60 axles QT1029 installs the LEFT axle shaft seal. Refer to our Dana 44 Axle Seal Tech Article for specific fitments and alternate seals/tools for 1977-1984 axles. For 1977-1984 non-disconnect axles, QT1029 is included in QK4830 Seal/tool Kit and TS4830 Tool Set. For 1988-2001 CAD axles, QT1002 is included in QK4620 Seal Kit and TS4620 Tool Set.  More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1002 1988-2001 Dodge Dana 44 or 1994-1999 Dodge Dana 60 Front Axle CAD Side Adjustable Depth Inner Axle Seal Installer Is our most popular Inner Axle Seal Installer as it quickly and easily installs QU40105 Spicer original equipment NOK made seal in the tight confines of your Axle Disconnect Housing. QT1002 is used on 1988-1993 Dodge Dana 44 axles with vacuum controlled Central Axle Disconnect (CAD) to install the LEFT axle shaft seal. For 1994-2001 Dodge Dana 44 and 1994-1999 Dodge Dana 60 axles, QT1002 installs the RIGHT axle shaft seal. QT1002 is included in QK4620 Seal Kit and TS4620 Tool Set.  More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1136 Fixed Depth Left Inner Axle Shaft Seal Installer for 1994-1999 Dodge Dana 60 Front Axles has a built-in depth stop to precisely install the left axle shaft seal in your 1994 to 1999 Dodge Ram 2500 or Ram 3500 with the Dana Spicer Model 60 front drive axle. QT1136 Custom-fit Seal Installer is specifically made to precisely install your left side Central Axle Disconnect (CAD) axle shaft oil seal easily and without damaging the seal.  The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. QT1136 is included in QK4698 Seal/Tool Kits and  TS4698 Tool Sets. More Info

$62.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1190 Fixed Depth Right Inner Axle Shaft Seal Installer for 1994-1999 Dodge Dana 60 Front Axles has a built-in depth stop to precisely install the right axle shaft seal in your 1994 to 1999 Dodge Ram 2500 or Ram 3500 with the Dana Spicer Model 60 front drive axle. QT1190 Custom-fit Seal Installer is specifically made to precisely install your right side Central Axle Disconnect (CAD) axle shaft oil seal easily and without damaging the seal.  The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. QT1190 is included in QK4698 Seal/Tool Kits and  TS4698 Tool Sets. More Info

$62.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1070 2000-2002 Dodge Dana 60 Right Axle Shaft Seal Installer Is used to install Spicer QU40171 original equipment Right Axle Shaft Seal on 2000-early 2002 Dodge Ram 2500 and Ram 3500 trucks having Dana 60 front axles equipped with vacuum controlled Central Axle Disconnect (CAD). QT1070 only works with original equipment type SKF/CR seals. QT1070 is included in QK4621 Seal/Tool Kits and TS4621 Tool Set. More Info

$62.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1071 2000-2002 Dodge Dana 60 Front Axle Seal Installer for both CAD and non-CAD Axles is used to install Spicer QU40298 original equipment seal for both CAD Disconnect and non-Disconnect Ram Dana 60 front axles. QT1071 is used to install the LEFT Axle Shaft Seal on 2000-early 2002 Dodge Ram 2500 and 3500 trucks with Central Axle Disconnect (CAD). For 2002, non-disconnect axles, QT1071 installs BOTH left and right seals. Works with original equipment type SKF/CR seals. For 2000-2002 CAD axles, QT1070 is included in QK4621 Seal/Tool Kits and TS4621 Tool Set. For 2002 non-CAD axles, QT1071 is included in QK4802 Seal/Tool Kit and TS4802 Tool Set. More Info

$62.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1143 2003-Current Dodge and RAM Inner Axle Shaft Oil Seal Installer Plate for AAM 925 Front Axle is specifically made to easily install original equipment QU10945 Front Axle Shaft Seals to the correct depth in all American Axle Manufacturing (AAM) 9-1/4" front beam axles used by Dodge and RAM  for 2003 and newer Ram 2500 and Ram 3500 4x4 trucks plus 2004-2010 Ram 1500 Mega Cab 4x4s. QT1143 is included in QK4685 Seal/Tool Kits and TS4685 Tool Set  More Info

$52.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Installers for Ford

top_page
product note

The individual Inner Axle Seal Installers listed in this section are for 1959-current Ford full size four wheel drive vehicles with Dana-Spicer monobeam front drive axles. For Ford Dana 60 Axles,
The axle seal tools and axle seals that will fit more applications than those they were originally cataloged for.

QT1222 2011-current Installer is actually a nearly universal fit installer that can be used to install QU20463 Oil Bath Seal without an axle shaft guide in ALL 1978-1979 and 1985 to current Dana 60 and Super 60 axles PLUS 1999-2005 Dana 50 axles.

QT1126 Adjustable Depth and QT1128 Fixed Depth 1999-2010 Installers will install QU40244 Oil Bath Seal with an axle shaft guide in all 1999 to current Ford Dana 60 and Super 60 Axles, PLUS, QT1126 also works on 1999-2005 Dana 50 axles.

QT1042 and QT1156 Installers are specific to 1991 and prior years to install QU40059 standard Axle Shaft Seal, however, they will also work to install QU40059 seal through the 1997 model year.

photo

QT1041 1959-1979 Ford Dana 44 Depth Stop Front Inner Axle Seal Installer Installs Spicer QU40055 current design unitized original equipment SKF/CR front inner axle seal with an integral guide in 1959-1979 F100, F150, F250 and 1971-1978.5 Bronco 4x4s with Dana-Spicer Model 44 axles. For 1978-1979 Bronco and F150 models, see our Dana 44 Front Axle Shaft Seal Applications Page for specific fitment information. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time.  Included in QK4871 Seal/Tool Kit and TS4871 Tool Set. More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1165 Adjustable Depth 1959-1979 Ford Dana 44 Front Inner Axle Seal Installer works to install SKF/CR manufactured Spicer QU40055 inner axle seals on 1971-1978 Ford Bronco and 1959-1978.5 F100, F150 1/2 ton or 1959-1979 F250 3/4 ton 4x4s with Dana 44 axles. This tool does not have a depth stop so you will need to check the depth of the old seals before removing them. For 1978-1979 Bronco and F150 models, see our Dana 44 Front Axle Shaft Seal Applications Page for specific fitment information. Also see QT1041 Fixed Depth Kit for Dana 44. Included in QK4872 Kit and TS4872 Tool Sets for Dana 44 axles.  More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1086 1974-1977.5 Ford Dana 60 and 1978-1979 Ford Dana 44 Large Diameter Inner Axle Shaft Seal Installer Installs QU40160 2-5/8" outside diameter inner axle seal in 1974-1977.5 Ford F250 Crew Cab Dana 60 Front Axle plus those 1978-1979 Ford Bronco and Ford F150 Dana 44 front axles that use QU40160 seals. See our Dana 44 Axle Seal Applications Page for specific fitment information for 1978 and 1979 model Bronco and F150. QT1086 installer is included in: QK4933 Install Tool/Seal Kit and TS4933 Install Tool Set without seals More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1042 1978-1979 and 1985-1997 Ford Dana 60 Adjustable Depth Inner Axle Seal Installer Allows you to install the QU40059 Spicer original equipment NOK manufactured inner axle seals on all 1978-1979 and 1985-1997 Ford Dana 60 front axles to different depths. This feature is especially useful when the axle shafts are grooved by the old seals. (Also see QT1156 Fixed Depth Installer.) QT1042 is included with QK4656 Seal/Tool Kit and TS4656 Tool Set.  More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1156 1978-1979 and 1985-1997 Ford Dana 60 Fixed Depth Inner Axle Seal Installer Permits, fast and fool-proof installation of QU40059 Spicer original equipment NOK manufactured inner axle seals on all 1978-1979 and 1985-1997 Ford Dana 60 front axles to a precise depth. (Also see QT1042 Adjustable Depth Installer.)  More Info

$72.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1222 Universal Adjustable Depth Inner Axle Seal Installer for Ford 1999-2005 Dana 50 Monobeam, 1978-current Dana 60 Front Axles is specific to 2011-up Ford Super Duty Dana Super 60 axles, but it will work equally well to install QU20463 Oil Bath Inner Axle Seal in 1978-2010 Ford open knuckle Dana 60 axles and 1999-2005 Dana 50 monobeam front axles. QT1222 installs  QU20463 Universal Oil Bath type Inner Axle Shaft Seal in 1978-1979 F250, F350 plus 1985-1997 F350 and all 1999-current Super Duty F250, F350, F450, F550 Dana 60 4x4s plus 1999-2005 Ford Dana 50 monobeam front axles. QT1222 is included in Dana 50 QK4982 Seal/Tool Kit, TS4982 Tool Set and Dana 60 QK4983 Seal/Tool Kit,  TS4983 Tool Set.  More Info

$59.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1126 1999-2010 Ford Dana 50 or Dana 60 Adjustable Depth Inner Axle Seal Installer Is a low cost tool that installs the 1999-2010 original equipment type QU40244 oil bath type inner axle seal with an integral guide in Ford Excursion plus 1999 to 2010 Ford Super Duty 4x4s. This installer will work on Dana 50 (1999-2005), Dana 60 (1999-2004), and Dana Super 60 (2005-2010) axles in Excursions, F250, F350, F450, and F550 models. Since there is no depth stop, you need to check the tool depth during installation. (When the Seal is at the proper depth, the rear face of the tool will be approximately flush with the axle bore face on a Model 50, and protrude out from the face about 0.200" on the Model 60.) QT1126 will also work on all 2011-up Ford Super Duty 4x4s to install QU40244 Seal with Guide. QT1126 is included in QK4643 Seal/Tool Kits and TS4643 Tool Sets for 1999-2005 Dana 50 and QK4644 Seal/Tool Kit and TS644 Tool Sets for 1999-2010 Dana 60 axles.   More Info

$59.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1127 1999-2005 Ford Dana 50 Fixed Depth Inner Axle Seal Installer Installs the original equipment type QU40244 oil bath type front inner axle oil seal with an integral axle guide to the correct depth in 1999-2005 Ford Excursion and 1999-2004 Ford Super Duty F-250 and F-350 Dana 50 front axles. (From 2002-2004, most if not all F-250/350 Diesel trucks used a Model 60 axle.) QT1127 is included in QK4808 Seal/Tool Kit and TS4808 Tool Set. More Info

$79.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1128 1999-2010 Ford Dana 60 Fixed Depth Inner Axle Seal Installer Installs the original equipment type QU40244 oil bath type front inner axle oil seal with an integral axle guide to the correct depth on 1999-2010 Ford Super Duty F250,  F-350, F-450 and F-550 trucks equipped with either Dana 60 (1999-2004) or Dana Super 60 (2005-2010) front axle. QT1128 will also work on all 2011-up Ford Super Duty 4x4s to install QU40244 Seal with Guide. QT1128 is included in QK4807 Seal/Tool Kit and TS4807 Tool Set. More Info

$81.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Individual Front Inner Axle Seal Installers for International Trucks and Scouts

top_page
product note

The individual Inner Axle Seal Installers listed in this section are for 1955-1980 International four wheel drive vehicles with Dana-Spicer solid front drive axles.

photo

QT1165 Adjustable Depth 1955-1980 International Dana 44 Front Inner Axle Seal Installer works to install SKF/CR manufactured Spicer QU40055 inner axle seals on 1955-1795 IHC 1/2 ton and 3/4 ton 4x4s plus 1973-1980 IHC Scouts with Dana 44 front axles. This tool does not have a depth stop so you will need to check the depth of the old seals before removing them.   Included in QK4872 Seal/Tool Kit and TS4872 Tool Sets for Dana 44 axles.  More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1041 1955-1980 IHC Dana 44 Depth Stop Front Inner Axle Seal Installer Installs Spicer QU40055 current design unitized original equipment SKF/CR front inner axle seal with an integral guide in 1955-1975 International 1/2 ton and 3/4 ton 4x4 trucks with Dana-Spicer Model 44 axles and 1973-1980 IHC Scout Dana 44 front axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. Included in QK4871 Seal/Tool Kit and TS4871 Tool Set. More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1138 Dana 70 Closed Knuckle Adjustable Depth Inner Axle Seal Installer for 1962-1982 IHC 4x4s Installs the Dana Spicer original equipment QU40382 Inner Axle Seals in 1961-1975 IHC 130, 1300, and 200 series 1 tons and 1962-1982 IHC 1600 4x4 trucks with Dana Spicer Model 70 closed knuckle front axles. More Info

$54.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Installers for Jeep

top_page
product note

The individual Inner Axle Seal Installers listed in this section are for 1962-current Jeep four wheel drive vehicles with Dana-Spicer solid front drive axles. 1982-1996 Jeep Dana front axles with vacuum controlled Central Axle Disconnect use different axle seals and installers for left and right sides. All other applications have identical seals for the left and right axle shafts.

photo

QT1165 1962-1988 Jeep Dana 44 Adjustable Depth Front Inner Axle Seal Installer Installs Spicer QU40055 current design unitized original equipment SKF/CR front inner axle seal with an integral guide in 1962-1988 J-Series Trucks, plus 1974-1977 Jeep Wagoneer and Jeep Cherokee Dana-Spicer Model 44 axles. For application details, see our Dana 44 Front Axle Shaft Seal Applications Page for specific fitment information.  This tool does not have a depth stop so you will need to check the depth of the old seals before removing them.  Included in QK4872 Seal/Tool Kit and TS4872 Tool Sets for Dana 44 axles.  More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1041 1963-1988 Jeep Dana 44 Depth Stop Front Inner Axle Seal Installer Installs Spicer QU40055 current design unitized original equipment SKF/CR front inner axle seal with an integral guide in 1963-1988 Jeep J-Series full size trucks and 1974-1977 Jeep Wagoneer and Jeep Cherokee Dana-Spicer Model 44 axles. For application details, see our Dana 44 Front Axle Shaft Seal Applications Page for specific fitment information. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. (Also see QT1165 Adjustable Depth Installer) Included in QK4871 Seal/Tool Kit and TS4871 Tool Set. More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1139 1972-2006 Jeep Dana 30 Front Inner Axle Seal Installer Installs the current production QU40307 Spicer original equipment NOK made Front Inner Axle Seal on most smaller Jeeps with and without Central Axle Disconnect (CAD). QT1139 installs both left and right seals in the following applications for axles without CAD: 1972-1986 Jeep CJ series, 1972-1973 Jeep Commando, 1981-1985 Jeep Scrambler, 1984-2001 Jeep XJ Cherokee/Wagoneer, 1986-1992 Jeep Comanche, 1993-2004 Jeep Grand Cherokee, 1987-1995 Jeep YJ Wrangler,  and 1997-2006 Jeep TJ Wrangler. QT1139 also replaces the left axle shaft seal on early CAD equipped axles including 1984-1987.5 XJ and early 1987 TJ.  5/8" Center Hole. QT1139 is included in QK4800 Seal/Tool Kit and TS4800 Tool Set for non-CAD axles (Also in QK4931 Master Axle Seal/Tool Kit for Jeep Dana 30 and Rubicon Dana 44). For 1984-1987 CAD axles, QT1139 is included in QK4601 Seal/Tool Kit and TS4601 Tool Set More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1079 1972-1978 Jeep CJ Inner Axle Seal Installer for Early Production Seals installs 1972-1978 original equipment type   QU40057 Seals on 1972-1978 Jeep CJ's with Dana Spicer 30 front axle. NOTE: This Tool will be available until sold out, we recommend you use QU40307 Seal and QT1139 Installer instead! More Info

$35.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1002 Right Inner Axle Seal Installer for 1984-1987.5 Jeep Dana 30 Front Axles with CAD Is our most popular Inner Axle Seal Installer. QT1002 is used on 1984-1987.5 Jeep XJ and Wrangler with vacuum controlled Central Axle Disconnect to install right side QU40105 Spicer original equipment NOK made seal for the large diameter disconnect axle shaft. QT1002 is included in QK4601 Seal/Tool Kit and TS4601 Tool Sets.  More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1080 Adjustable Depth Right Inner Axle Shaft Seal Installer Makes installing Spicer original equipment QU40098 Right Axle Shaft Seal on 1987-1991 Jeep Cherokee (XJ) and 1987.5-1996 Wrangler (YJ) front axles with vacuum controlled Central Axle Disconnect (CAD) easyOur Custom-fit Seal Installer is specifically made to install Central Axle Disconnect side axle shaft oil seal easily and without damaging the seal. Precision CNC machined right here in Montana, QT1080 Installer is used in conjunction with 1/2" diameter QT1107 Rod and QT1196 Thrust Plate to make successful installation of your tight fitting CAD seal simple, Easy, and straightforward. The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. QT1080 is included in TS4624 Seal/Tool Kit and QK4624 Tool Set. 1/2" center hole. More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1089 Adjustable Depth 1987.5-1996 Jeep Left Inner Axle Shaft Seal Installer for CAD Front Axles is used on 1987.5-1991 Jeep Cherokee/Wagoneer/Comanche (XJ) and 1987-1996 Wrangler (YJ) models with Dana 30 front axles having vacuum controlled Central Axle Disconnect (CAD) to install the QU40307 original equipment NOK made seal for the left axle shaft. Custom-fit Seal Installer is specifically made to install Central Axle Disconnect side axle shaft oil seal easily and without damaging the seal. QT1089 Installer is used in conjunction with 1/2" diameter QT1107 Rod and QT1196 Thrust Plate to make successful installation of your tight fitting axle shaft seal simple, Easy, and straightforward. The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. QT1089 is included in TS4624 Seal/Tool Kit and QK4624 Tool Set. 1/2" Center Hole. More Info

 

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1203 Inner Axle Seal Installer Tool for 2003-2006 Jeep TJ Rubicon and 2007-2011 Jeep JK Wrangler installs QU40812 Spicer original equipment Front Inner Axle Oil Seal in all 2003-2011 Jeep Wrangler Rubicon Dana 44 front axles AND all 2007-2011 Jeep JK Wrangler Dana 30 front axles. QT1139 Custom-fit Seal Installer is specifically made to install your QU40812 Jeep inner axle shaft oil seal easily and without damaging the seal. Precision CNC machined right here in Montana, this Adjustable Depth Installer is used in conjunction with QT1189 Press Screw Assembly and axle model specific Thrust Plate to make successful installation of your tight fitting axle seals simple, Easy, and straightforward. The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Seal Installers, Individual, by Part Number

top_page
product note

In this section, we list our individual Inner Axle Seal Installer Plates in numeric order.

photo

QT1002 Inner Axle Seal Installer for 1984-1987 Jeep Dana 30 and 1988-2001 Dodge Dana 44 or 1994-1999 Dodge Dana 60 Front Axles Is our most popular Inner Axle Seal Installer. QT1002 is used on early Jeep XJ and Wrangler and most 1988-2001 Dodge full-size trucks with Central Axle Disconnect to install the QU40105 Spicer original equipment NOK made seal for the large diameter disconnect axle shaft. QT1002 is included in QK4620  (Dodge), QK4601 (Jeep)Seal Kits and TS4620 (Dodge), TS4601 (Jeep) Tool Sets.  More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1029 Dana 44 and Dana 60 Axle Seal Installer is used most commonly on 1985-2001 Dodge full-size trucks with either Dana 44 (1985-2001) or Dana 60 (1994-1999) using vacuum controlled Central Axle Disconnect (CAD) to install the QU40159 original equipment NOK made seal for the small diameter non-disconnect axle shaft. Several other Dana 44 used the same NOK Seal including 1978-1980 GM, 1977-1984 Dodge, 1979 Ford, and 1978-19878 Jeep J10, J20. Refer to our Dana 44 Axle Seal Tech Article for specific fitments and alternate seals/tools for the non-disconnect axles. Also see QT1165 Adjustable Depth or QT1041 Fixed Depth Installers that fit CR seals made for the same Application.  More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1041 Dana 44 Depth Stop Front Inner Axle Seal Installer Installs Spicer QU40055 current design unitized original equipment SKF/CR  front inner axle seal with an integral guide in many older 4x4 trucks with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. (Also see QT1165) Included in QK4871 Kit and TS4871 Tool Set. More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1042 1975-1997 Dana 60 or Dana 61 Adjustable Depth Inner Axle Seal Installer Allows you to install the QU40059 Spicer original equipment NOK manufactured inner axle seals on most 1970's-1990's Model 60 and 61 axles to different depths. This feature is especially useful when the axle shafts are grooved by the old seals. (Also see QT1156 Fixed Depth Installer.) QT1042 is included with QK4656 Seal/Tool Kit and TS4656 Tool Set.  More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1070 2000-2002 Dodge Dana 60 Right Axle Shaft Seal Installer Is used to install Spicer QU40171 original equipment Right Axle Shaft Seal on 2000-early 2002 Dodge Ram 2500 and Ram 3500 trucks having Dana 60 front axles equipped with vacuum controlled Central Axle Disconnect (CAD). QT1070 only works with original equipment type SKF/CR seals. QT1070 is included in QK4621 Seal/Tool Kits and TS4621 Tool Set. More Info

$62.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1071 2000-2002 Dodge Dana 60 Front Axle Seal Installer for both CAD and non-CAD Axles is used to install Spicer QU40298 original equipment seal for both CAD Disconnect and non-Disconnect Ram Dana 60 front axles. QT1071 is used to install the LEFT Axle Shaft Seal on 2000-early 2002 Dodge Ram 2500 and 3500 trucks with Central Axle Disconnect (CAD). For 2002, non-disconnect axles, QT1071 installs BOTH left and right seals. Works with original equipment type SKF/CR seals. For 2000-2002 CAD axles, QT1070 is included in QK4621 Seal/Tool Kits and TS4621 Tool Set. For 2002 non-CAD axles, QT1071 is included in QK4802 Seal/Tool Kit and TS4802 Tool Set. More Info

$62.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1079 1972-1978 Jeep CJ Inner Axle Seal Installer for Early Production Seals installs 1972-1978 original equipment type   QU40057 Seals on 1972-1978 Jeep CJ's with Dana Spicer 30 front axle. NOTE: This Tool will be available until sold out, we recommend you use QU40307 Seal and QT1139 Installer instead! More Info

$35.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1080 Adjustable Depth Right Inner Axle Shaft Seal Installer Makes installing Spicer original equipment QU40098 Right Axle Shaft Seal on 1987-1991 Jeep Cherokee (XJ) and 1987.5-1996 Wrangler (YJ) front axles with vacuum controlled Central Axle Disconnect (CAD) easyOur Custom-fit Seal Installer is specifically made to install Central Axle Disconnect side axle shaft oil seal easily and without damaging the seal. Precision CNC machined right here in Montana, QT1080 Installer is used in conjunction with 1/2" diameter QT1107 Rod and QT1196 Thrust Plate to make successful installation of your tight fitting CAD seal simple, Easy, and straightforward. The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. QT1080 is included in TS4624 Seal/Tool Kit and QK4624 Tool Set. 1/2" center hole. More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1084 Installs a CR manufactured QU40270 seal in the applications that originally used a NOK made seal. The QU40270 was also original equipment on some 1999 Dodge 2500 and 3500 trucks and 1999-2001 Dodge 1500 models. See QT1029 for installer for NOK made seal for same applications. More Info

$57.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1086 1974-1977.5 Ford Dana 60 and 1978-1979 Ford plus 1980-1991 Jeep Wagoneer Dana 44 Large Diameter Inner Axle Shaft Seal Installer Installs QU40160 2-5/8" outside diameter inner axle seal in 1974-1977.5 Ford F250 Crew Cab Dana 60 Front Axle plus those 1978-1979 Ford Bronco, Ford F150, Jeep Cherokee, and 1980-1991 Jeep Wagoneer Dana 44 front axles that use QU40160 seals.. For 1978-1979 Bronco and F150 models, see our Dana 44 Front Axle Shaft Seal Applications Page for specific fitment information. QT1086 installer is included in: QK4933 Install Tool/Seal Kit and TS4933 Install Tool Set without seals More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1089 Adjustable Depth 1987.5-1996 Jeep Left Inner Axle Shaft Seal Installer for CAD Front Axles is used on 1987.5-1991 Jeep Cherokee/Wagoneer/Comanche (XJ) and 1987-1996 Wrangler (YJ) models with Dana 30 front axles having vacuum controlled Central Axle Disconnect (CAD) to install the QU40307 original equipment NOK made seal for the left axle shaft. Custom-fit Seal Installer is specifically made to install Central Axle Disconnect side axle shaft oil seal easily and without damaging the seal. QT1089 Installer is used in conjunction with 1/2" diameter QT1107 Rod and QT1196 Thrust Plate to make successful installation of your tight fitting axle shaft seal simple, Easy, and straightforward. The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. QT1089 is included in TS4624 Seal/Tool Kit and QK4624 Tool Set. 1/2" Center Hole. More Info

 

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1126 1999-2010 Ford Dana 50 or Dana 60 Adjustable Depth Inner Axle Seal Installer Is a low cost tool that installs the 1999-2010 original equipment type  QU40244 oil bath type inner axle seal with an integral guide in Ford Excursion plus 1999 to 2010 Ford Super Duty Dana 50, Dana 60, and Dana Super 60 monobeam front axles. This installer will work on Dana 50 (1999-2005), Dana 60 (1999-2004), and Dana Super 60 (2005-2010) axles in Excursions, F250, F350, F450, and F550 models. Since there is no depth stop, you need to check the tool depth during installation. (When the Seal is at the proper depth, the rear face of the tool will be approximately flush with the axle bore face on a Model 50, and protrude out from the face about 0.200" on the Model 60.) QT1126 will also work on all 2011-up Ford Super Duty 4x4s to install QU40244 Seal with Guide. QT1126 is included in QK4643 Seal/Tool Kits and TS4643 Tool Sets for 1999-2005 Dana 50 and QK4644 Seal/Tool Kit and TS644 Tool Sets for 1999-2010 Dana 60 axles.   More Info

NOTE: We also make Installers with depth stops for these axles, see QT1127 and QT1128.

$59.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1127 1999-2005 Ford Dana 50 Adjustable Depth Inner Axle Seal Installer Installs the original equipment type QU40244 oil bath type front inner axle oil seal with an integral axle guide to the correct depth in 1999-2005 Ford Excursion and 1999-2004 Ford Super Duty F-250 and F-350 Dana 50 front axles. (From 2002-2004, most if not all F-250/350 Diesel trucks used a Model 60 axle.) QT1127 is included in QK4643 Seal/Tool Kit and TS4643 Tool Set. More Info

$79.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1128 1999-2010 Ford Dana 60 Fixed Depth Inner Axle Seal Installer Installs the original equipment type QU40244 oil bath type front inner axle oil seal with an integral axle guide to the correct depth on 1999-2010 Ford Super Duty F250,  F-350, F-450 and F-550 trucks equipped with either Dana 60 (1999-2004) or Dana Super 60 (2005-2010) front axle. QT1128 will also work on all 2011-up Ford Super Duty 4x4s to install QU40244 Seal with Guide. QT1128 is included in QK4807 Seal/Tool Kit and TS4807 Tool Set. More Info

$81.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1138 Dana 70 Closed Knuckle Adjustable Depth Inner Axle Seal Installer for 1958-1978 Dodge and 1961-1982 IHC 4x4s Installs the Dana Spicer original equipment QU40382 Inner Axle Seals in 1958-1978 Dodge and 1961-1982 International trucks with Dana Spicer Model 70 closed knuckle front axles. The Dana 70 was used in both 1 ton and 2 ton truck chassis by both Dodge and International. More Info

$54.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1139 1972-2006 Jeep Dana 30 Front Inner Axle Seal Installer Installs the current production QU40307 Spicer original equipment NOK made Front Inner Axle Seal on most smaller Jeeps with and without Central Axle Disconnect (CAD). QT1139 installs both left and right seals in the following applications for axles without CAD: 1972-1986 Jeep CJ series, 1972-1973 Jeep Commando, 1981-1985 Jeep Scrambler, 1984-2001 Jeep XJ Cherokee/Wagoneer, 1986-1992 Jeep Comanche, 1993-2004 Jeep Grand Cherokee, 1987-1995 Jeep YJ Wrangler,  and 1997-2006 Jeep TJ Wrangler. QT1139 also replaces the left axle shaft seal on early CAD equipped axles including 1984-1987.5 XJ and early 1987 TJ.  5/8" Center Hole. QT1139 is included in QK4800 Seal/Tool Kit and TS4800 Tool Set for non-CAD axles (Also in QK4931 Master Axle Seal/Tool Kit for Jeep Dana 30 and Rubicon Dana 44). For 1984-1987 CAD axles, QT1139 is included in QK4601 Seal/Tool Kit and TS4601 Tool Set More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1143 2003-Current Dodge and RAM Inner Axle Shaft Oil Seal Installer Plate for AAM 925 Front Axle is specifically made to easily install original equipment QU10945 Front Axle Shaft Seals to the correct depth in all American Axle Manufacturing (AAM) 9-1/4" front beam axles used by Dodge and RAM  for 2003 and newer Ram 2500 and Ram 3500 4x4 trucks plus 2004-2010 Ram 1500 Mega Cab 4x4s. QT1143 is included in QK4685 Seal/Tool Kits and TS4685 Tool Set  More Info

$52.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1156 1975-1997 Dana 60 or Dana 61 Fixed Depth Inner Axle Seal Installer Permits, fast and fool-proof installation of QU40059 Spicer original equipment NOK manufactured inner axle seals on most 1970's-1990's Model 60 and 61 axles to a precise depth. (Also see QT1042 Adjustable Depth Installer.)  More Info

$72.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1165 Adjustable Depth Dana 44 and GM 10 Bolt Front Inner Axle Seal Installer works to install SKF/CR manufactured Spicer QU40055 inner axle seals on many older trucks with Dana 44 axles and all GM trucks with the GM 10 bolt solid front axle. This tool does not have a depth stop making it suitable for use on both Dana 44 and GM 10 bolt applications, so you will need to check the depth of the old seals before removing them. GM always used a CR seal for the 10 bolt, but many Dana axles were originally equipped with an NOK seal which Spicer has replaced with the CR design. Also see QT1041 Fixed Depth Kit for Mod 44. Included in QK4872 Kit and TS4872 Tool Sets for Dana 44 axles and QK4811 Axle Seal Kit or TS4811 Tool Set for GM 10 Bolt Front Axles. More Info

$49.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1203 Inner Axle Seal Installer Tool for 2003-2006 Jeep TJ Rubicon and 2007-2011 Jeep JK Wrangler installs QU40812 Spicer original equipment Front Inner Axle Oil Seal in all 2003-2011 Jeep Wrangler Rubicon Dana 44 front axles AND all 2007-2011 Jeep JK Wrangler Dana 30 front axles. QT1139 Custom-fit Seal Installer is specifically made to install your QU40812 Jeep inner axle shaft oil seal easily and without damaging the seal. Precision CNC machined right here in Montana, this Adjustable Depth Installer is used in conjunction with QT1189 Press Screw Assembly and axle model specific Thrust Plate to make successful installation of your tight fitting axle seals simple, Easy, and straightforward. The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. More Info

$47.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1222 Dana 50, Dana 60 Universal Adjustable Depth Inner Axle Seal Installer is specific to 2011-up Ford Super Duty Dana 60 axles, but it will work equally well to install QU20463 Oil Bath Inner Axle Seal in most older, open knuckle Dana 60 axles. Installs  QU20463 Universal Oil Bath type Inner Axle Shaft Seal in most 1975-current Dana 60 and 1999-2005 Dana 50 monobeam front axles. QT1222 is included in Dana 50 QK4982 Seal/Tool Kit, TS4982 Tool Set and Dana 60 QK4983 Seal/Tool Kit, TS4983 Tool Set.  More Info

$59.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Press Screws

top_page
product note

Press Screws are used in conjunction with application specific seal installers and thrust plates to press in the left and right inner axle seals for 1941-current domestic front beam type axles EXCEPT for Dana axles in 1985-2002 Dodge and 1984-1996 Jeep vehicles equipped with a vacuum controlled Central Axle Disconnect (CAD) system.

photo

QT1133 Front Inner Axle Shaft Seal Press Screw Assembly for Dana/Spicer Model 50, 60, 61, 70, and GM 10 Bolt Front Axles Use with the appropriate,  application specific Seal Installer and Thrust Plate for your application to quickly and easily press the Inner Axle Shaft oil seals in your 4x4 front axle. Rod is CNC machined from a billet of solid high strength U.S. produced steel. Has wrench flats for 7/8" end wrench to hold rod steady as you tighten the hardened forcing nut against the seal installer for your application. QT1133 Assembly includes Press Screw, Hardened Forcing Nut, Grade 8 Nut, 2 Grade 8 Flat Washers, and Retaining Clip. More Info

$59.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1189 Front Inner Axle Shaft Seal Press Screw Assembly for Dana/Spicer Model 30 and 44 Front Axles without Central Axle Disconnet (CAD) Use with the appropriate, application specific  Seal Installer and Thrust Plate for your application to quickly and easily press the Inner Axle Shaft oil seals in your 4x4 front axle. Rod is CNC machined from a billet of solid high strength U.S. produced steel. Has wrench flats for 7/8" end wrench to hold rod steady as you tighten the hardened forcing nut against the seal installer for your application. QT1189 Assembly includes Press Screw, Hardened Forcing Nut, Grade 8 Flat Washers, and Retaining Clip. Made in U.S.A. by Us Here in Montana. More Info

$49.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1195 Front Inner Axle Shaft Seal Press Screw Assembly for 2003 to 2018 Dodge/RAM AAM 925 14 Bolt Front Axles Use with QT1143 Seal Installer and QT1193 Thrust Plate to quickly and easily press the Inner Axle Shaft oil seals in your Ram 2500, Ram 3500, or Mega Cab Ram 1500 4x4 front axle. Rod is CNC machined from a billet of solid high strength U.S. produced steel. Has wrench flats for 7/8" end wrench to hold rod steady as you tighten the hardened forcing nut against the seal installer for your application. QT1195 Assembly includes  Press Screw, Hardened Forcing Nut, Grade 8 Nut, Grade 8 Flat Washers, and Retaining Clip. More Info

$59.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pull Rods for Dana Axles with CAD

top_page
product note

1988-2002 Dodge and 1984-1996 Jeep Dana axles with vacuum controlled Central Axle Disconnect use inner axle seal tools that PULL the seal into place. The Inner Axle Seals used in CAD front axles are some of the most difficult vehicle seals to install due to the limited space available and the high torque required to start the seal into the bore. Combine one of our Pull Rods, which are made from 125,000 psi., hardened rod and application-specific seal installers/thrust plates to make easy work of an otherwise daunting job. Two sizes are available QT1107 1/2" Rod is for 1987-1996 Jeeps with small diameter seals. QT1048 is used for 1988-2002 Dodge and 1984-1987.5 Jeep with large diameter seals.

photo

QT1048 18" Axle Shaft Seal Installation Pull Rod for Dana CAD Axles is used on all 1988-2002 Dodge full size models and 1984-1986 plus some 1987 Jeep XJ and YJ 4x4's WITH vacuum controlled Central Axle Disconnect (CAD). Rod is used to pull Front Axle Shaft Seals into place in conjunction with the appropriate Inner Axle Seal Installer and Axle End Plate. 5/8" diameter. Heat Treated Steel Rod is rated at 125,000 psi tensile strength. Includes American made, certified Grade 8 Hardened Nuts and Washers! Shaft and Hardware. More Info

$34.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1107A 18" Axle Shaft Seal Installation Pull Rod Set for 1987.5-1996 Cherokee/Comanche (XJ) and 1987.5-1996 Wrangler (YJ) models with vacuum controlled Central Axle Disconnect (CAD). Rod is used to pull Front Axle Shaft Seals into place in conjunction with the appropriate Inner Axle Seal Installer and Axle End Plate. 1/2" diameter. Heat Treated Steel Rod is rated at 125,000 psi tensile strength. Includes American made, certified Grade 8 Hardened Nuts and Washers! Shaft and Hardware. More Info

$21.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Seal Removers

top_page
product note

Except for Dana axles with vacuum controlled Central Axle Disconnect (CAD), Inner Axle Seals are located at the inboard ends of the axle tubes right next to the differential. For most Dana CAD axles, the seal for the CAD side is positioned in the axle tube to the outboard side of the CAD housing while the non-CAD side is next to the differential. To remove these seals, you have to disassemble the axle up to and including the differential, then the seals must be driven inward. While makeshift tools like a piece of pipe may work to drive the seals out, removal is best accomplished with our special tools that are specifically made to efficiently knock tight-fitting seals out of the seal bores.  For applications like Ford Super Duty and Excursion, are removers are made to get the seals out without damaging axle shaft guides. After removing the seals,  you need to clean any dirt, grit or crud out of the diff housing and axle tubes much the same as you would clean a rifle barrel. By getting the crud out of the tubes, you minimize the chances that your axle shafts will push crud into you new seals or into the differential housing.

photo

QK4647 Front Axle Inner Oil Seal Remover Set with 1-3/4" Driver Tip for up to 3/4 ton axles and 1999-2004 Ford Super Duty is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 1-3/4" or larger and axle shaft seal inside diameters of 1-1/2" or smaller. This handy tool knocks out those tricky inner axle shaft seals in a flash! In addition, QK4647 lets you easily remove the 1-9/16" ID oil bath type front axle shaft oil seals on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion 4x4 without removing or damaging the fragile plastic axle tube guides. Space saving two piece rod threads together for removing the long side seal. Use just the long rod for knocking out the short side seal. For axles with small inside diameters, use the nut as your remover tip. More Info

$105.38
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4862 Front Axle Inner Oil Seal Remover Set for AAM 925 and Most Dana 60 Front Axles is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 2" or larger and axle shaft seal inside diameters of 1-3/4" or smaller. This handy tool knocks out those tricky inner axle shaft seals in a flash! In addition, our space saving two piece rod threads together for removing the long side seal. Use just the long rod for knocking out the short side seal. Applications include 2003-2018 Dodge RAM AAM 925 Front Axle and Dana 60 Front axles without CAD through the 1997 model year plus Ford Super Duty Dana Super 60 Axles  from 2005 -on. More Info

$105.29
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4863 Drive Rod Set for Removing Front Inner Axle Shaft Oil Seals includes QT1145 and QT1151 Drive Rods and 2 QU95007 7/8" Grade 8 Coarse Thread (USS) Nuts. Use these Rods with the included nuts to remove inner axle seals from vintage axles with small inside diameter axle tubes or along with our available Seal Remover to drive out the inner axle seals from almost any solid beam front 4x4 drive axle. QT1145 is the long, outer Rod with a knurled grip which is used to drive out seals from the short side on most trucks or both the left and right seals on 1988 to 2002 Dodge Ram full size models with vacuum controlled Central Axle Disconnect (CAD) systems. QT1151 is the extension rod that screws onto QT1145 to reach the long side inner axle shaft seals. More Info

$80.39
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1184 Front Axle Shaft Oil Seal Remover Set For Dodge RAM with CAD is a real time saver! Use to remove the inner axle shaft oil seals on most full size Dodge 4x4s with Dana Spicer Model 44 (1989-2001) or Model 60 (1994-1999) solid front drive axles equipped with the vacuum controlled Central Axle Disconnect (CAD) system. This handy tool knocks out those tricky inner axle shaft seals in a flash! Kit includes QT1145 drive rod, QT1214 seal remover, and Grade 8 jam nut. More Info

$63.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1144 1-3/4" Size Front Axle Shaft Oil Seal Remover is used in conjunction with our TS4863 Handle Set to remove the front inner axle shaft oil seals from most popular smaller size SUV's and 4x4 trucks with solid front drive axles.  QT1144 measures a bit under 1-3/4" Outside Diameter, so it will work in all axles with axle tube inside diameters of 1.75" and larger. Maximum seal ID with rubber lip seals is 1.5", max seal diameter with oil bath type seal is 1-9/16" (used on Ford Excursion and Super Duty® Model 50 and 60 monobeam axles from 1999 to 2004). This remover fits most Model 30, Model 44, and GM 10 Bolt front axles. The outside diameter is made to fit through the inner plastic axle guides used on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion. More Info

$26.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1214 2" Front Axle Shaft Oil Seal Remover is used in conjunction with our TS4863 Handle Set to remove the front inner axle shaft oil seals from most popular full-size SUV's and 4x4 trucks with solid front drive axles. QT1214 measures a bit under 2" Outside Diameter, so it will work in all front axles with axle tube inside diameters of 2.00" and larger. Maximum seal ID 1-3/4". This remover fits most Model Model 44, Model 50, Model 60, Model 61, Model 70, AAM 925, and GM 10 Bolt front axles with 3" or larger Outside Diameter (OD) axle tubes. QT1214 is included in TS1184 and TS4862 Tool Sets. More Info

$29.95
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1216 2-1/4" Front Axle Shaft Oil Seal Remover is used in conjunction with our TS4863 Handle Set to remove the front inner axle shaft oil seals from many late model 4x4 trucks with solid front drive axles. QT1216 measures a bit under 2-1/4" Outside Diameter, so it will work in all axles with axle tube inside diameters of  2.25" and larger. Maximum seal ID 2". This remover is primarily made to remove the large bore, right side inner axle seal on 2000-2002 Dodge Ram 2500 and Ram 3500 trucks with vacuum controlled Central Axle Disconnect (CAD). It will also work on all to remove the left seals on the same model trucks, plus either seal on all 2002 and newer Dodge Ram 2500 and Ram 3500 models and all 2005 and newer Ford Super Duty® F-250, F-350, F450, and F-550 4x4s. More Info

$31.95
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Thrust Plates with Central Axle Disconnect (CAD)

top_page
product note

Thrust Plates are used at the outboard end of the axle tubes to anchor the Pull Rod during Inner Axle Seal installation on Dodge and Jeep 4x4s with Dana axles equipped with vacuum controlled Central Axle Disconnect (CAD). Our Thrust Plates for CAD axles are machined with a pilot that fits inside the end of the axle tube so your Pull Rod will be centered. By keeping the Pull Rod centered, your new axle seals will be pulled in straight. Using makeshift tools such as a socket, may result in a cocked and leaking seal.

photo

QT1047 Axle End Thrust Plate for Dodge Ram 1988-2001 Dana 44 and 1994-1999 Dana 60 Front Axles with CAD is placed on the outer end of the axle tube to act as a thrust plate during axle shaft seal installation on 1994-2001 Dodge Ram 1500 and 1994 to 1999 Dodge Ram 2500/3500 4x4 trucks. Also fits 1988-1993 Ramcharger, Trailduster, W150, and W-250 4x4s with the Dana Spicer model 44 drive axle. QT1047 is made to fit 1988-2001 Dodge Axles with 2-1/8" Axle Tube inside diameters. 5/8" ID center hole accepts QT1048 Press Rod. QT1047 is included in TS4620 Tool Set and QK4620 Seal/Tool Kit. More Info

$26.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1196 Triple Step Thrust Plate for Front Axle Seal Installation of 1987-1996 Jeep CAD Front Axles QT1196 is placed at the outer end of the axle tube to act as a thrust plate during axle shaft seal installation on 1987.5-1996 Cherokee/Comanche (XJ) and 1987-1996 Wrangler (YJ) 4x4s with Dana 30 front axles equipped with vacuum controlled Central Axle Disconnect (CAD). 1/2" ID center hole accepts QT1107 Press Rod. QT1196 is included in and QK4624 Seal?Tool Kit TS4624 Tool Set. More Info

$37.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1092 Double Step Axle End Thrust Plate all 1988-2002 Dodge RAM Dana 44 and Dana 60 CAD Front Axles is placed on the outer end of the axle tube to act as a thrust plate during axle shaft seal installation on 1988-2002 Dodge 4x4 trucks with vacuum controlled Central Axle Disconnect (CAD) Dana 44 or Dana 60 front axles. QT1092 is made to fit 1988-2001 Dodge Axles with 2-1/8" Axle Tube inside diameters AND 2000-2002 Ram 2500, Ram 3500 Dana 60 front axles which have 2-3/4" Axle Tube inside diameters. 5/8" ID center hole accepts QT1048 Press Rod. More Info

$37.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1131 Axle End Thrust Plate for 2000-2002 Dodge Ram 2500, Ram 3500 Dana 60 CAD Axles is placed on the outer end of the axle tube to act as a thrust plate during axle shaft seal installation on 2000-2002 Dodge Ram 2500, Ram 3500 4x4 trucks with vacuum controlled Central Axle Disconnect (CAD). QT1131 is made to fit 2000-2002 Dodge Ram Front Dana 60 Axles with 2-3/4" Axle Tube inside diameters. 5/8" ID center hole accepts QT1048 Press Rod. QT1131 is included in and QK4621 Seal/Tool Kit TS4621  Tool Set. More Info

$32.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Thrust Plates, for Dana without CAD and AAM

top_page
product note

Thrust Plates are used in conjunction with application specific seal installers and press rods to press in the left and right inner axle seals for 1941-current domestic front beam type axles EXCEPT for Dana axles in 1985-2002 Dodge and 1984-1996 Jeep vehicles equipped with a vacuum controlled Central Axle Disconnect (CAD) system. The Thrust Plates fit on the short threaded end of a Press Screw and they are placed against the differential bearing bore face opposite of the side you are installing the seal in. Typical Axle Seal Tool Detail

photo

QT1129 Axle Seal Installer Thrust Plate for 1999-2005 Ford Dana 50 Front Axles fits 1999-2002 Ford Super Duty and 2000-2005 Ford Excursion Dana 50 monobeam axles. QT1129 is placed against the differential bearing bore face opposite of the side you are pressing in a new seal. QT1129 is included in QK4643, QK4808QK4982 Seal/Tool Kits and in TS4643, QK4808QK4982 Tool Sets. More Info

$32.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1130 Axle Seal Installer Thrust Plate for Dana 60, Dana 61, Super 60, and Dana 70 Front Axles Fits all Dana Model 60, Super 60, 61, and Closed Knuckle Model 70 axles from 1957-current.  QT1130 is placed against the differential bearing bore face opposite of the side you are pressing in a new seal. QT1130 is included in QK4644QK4807QK4983 Seal/Tool Kits and in TS4644QK4807QK4983 Tool Sets. More Info

$35.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1161 Seal Installer Thrust Plate for 1955-2006 Dana 44 Front Axles is used with QT1165 Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in 1955-2006 Dana 44 4x4 solid beam front axles without vacuum controlled Central Axle Disconnect. Applications include Chevy/GMC 1960-1980, Dodge 1957-1984, Ford 1959-1979, IHC 1955-1980, Jeep J-Series 1962-1991, and Jeep Wrangler Rubicon 2003-2006. More Info

$32.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1186 Seal Installer Thrust Plate for Dana 30 and GM 10 Bolt Front Axles is used with QT1133 (1977-1991 GM 10 Bolt) or QT1189 (1972-current Dana 30) Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in solid beam 4x4 front axles without vacuum controlled Central Axle Disconnect. More Info

$33.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1193 Thrust Plate for 2003-2018 Dodge and RAM AAM 925 Front Axle Oil Seal Installation is a double-sided Plate that is used in conjunction with QT1143 Seal Installer and TS1195 Press Screw when installing original equipment QU10945 Front Axle Shaft Seals in all American Axle Manufacturing (AAM) 9-1/4" front beam axles used by Dodge and RAM for 2003 to 2018 Ram 2500 and Ram 3500 4x4 trucks plus 2004-2010 Ram 1500 Mega Cab 4x4s. The two sided design of this Thrust Plate centers the Press Screw while protecting your axle housing and seal from damage during the installation procedure. More Info

$46.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1220 Axle Seal Installer Thrust Plate for 2007-up Jeep Wrangler Rubicon Dana 44 Front Axles works with matching tools when you installing new front inner axle seals in 2007-up Jeep JK Wrangler Rubicon Dana 44 front axle. Fits 3.307" outside diameter bearing cups so this tool will NOT fit older Dana 44 front axles. More Info

$32.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Discontinued Tools

top_page
product note

The following items have been discontinued and are no longer available.

photo

QK4622 Inner Axle Seal Tool Set With original equipment Spicer/Chicago Rawhide brand Seals in 1994-2001 Ram 1500, and 1994-1999 Ram 2500-3500 4x4 Trucks. Also See QK4804 Right Side Only. These items have been discontinued.

photo

TS4622 Adjustable Depth Inner Axle Shaft Seal Installer Tool Set. See TS4804 for Right Side Only Option. These items have been discontinued.

photo

QT1114 Works on most 1988-2001 Dodge full-size trucks with Central Axle Disconnect to install the QU40326 late production, original equipment, Chicago Rawhide (CR) manufactured seal for the large diameter disconnect axle shaft. See QT1002 for installer for NOK made seal for same applications. Discontinued.