Ball Joint Tools

CNC Machined Ball Joint Tools are essential for damage free Ball Joint removal and installation. Eliminates one of the most common causes of premature Ball Joint Failures, namely incorrect Ball Joint installation with hammers or other makeshift tools. Most of our precision machined Ball Joint Tooling are drilled to accept the 7/16" tip of our long-throat QT1065 and M1065 C-Frame Ball Joint Presses.

Ball Joint Tools Sets with C-Frame Press

top_page
product note

Complete Tool Sets for replacing the pressed in Ball Joints on popular 4x4 front drive axles. These Sets feature our long-throat M1065 C-Frame Press and the correct adapters to replace both original equipment and most aftermarket Ball Joints. All Adapters are Made in U.S.A., M1065 Press is imported.

photo

TS1065 2000-2002 Ball Joint Set fits all 2000 Dodge Ram 2500, 2001 Dodge Ram 2500 and 2002 Dodge Ram 2500 4x4 trucks. TS1065 also works on all 2000 Dodge Ram 3500, 2001 Dodge Ram 3500 and 2002 Dodge Ram 3500 4x4 trucks.

Link to TS1065 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1082 7 Piece Ball Joint Press Set for 2003-current Dodge Ram 2500 and Ram 3500 4x4 Trucks (AAM 9.25 Front Axle) Set Includes: QT1065M C-Frame Press, QT1067 Upper Ball Joint Installer, QT1148 Adapter Sleeve, QT1152 Press Stub, QT1153 Ball Joint Receiver (Also used to install lower seal), QT1154 Notched Upper Ball Joint Installation Receiver, and QT1155 Lower Ball Joint Installer.

Link to TS1082 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4511 8 Piece Ball Joint Tool Kit is the easiest and safest way to remove and install ball joints for all 1994 Dodge Ram 2500, 1995 Dodge Ram 2500, 1996 Dodge Ram 2500, 1997 Dodge ram 2500, 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. TS4511 also works on all 1994 Dodge Ram 3500, 1995 Dodge Ram 3500, 1996 Dodge Ram 3500, 1997 Dodge Ram 3500, 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. TS4511 also works on 1992-1997 Ford f350 and 1999-2004 Ford all 4x4 Superduty and Excursions 2005-up Ford Super Duty 4x4 F250, F350 1992-'97 Ford F350 1999-2004 Ford All 4x4 Super Duty & Excursion 2005-up Ford Super Duty 4x4 F250, F350.

Link to TS4511 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4821 14 Piece Master 3/4 and 1 Ton 4x4 Ball Joint Tool Set For Dana-Spicer Model 50 Monobeam, Dana-Spicer Model 60, Dana-Spicer Super 60, and AAM 925 front axles. This Kit services all of the following models: 1999 to current Ford F-250 Super Duty® 4x4 trucks, 1992-current Ford F-350 regular and Super Duty® 4x4 trucks and all 1994-current Dodge Ram 2500 and Ram 3500 4x4 trucks (except 1994-1997 Ram 2500 trucks under 8800 lb GVW which are equipped with Dana 44 axles.)

Link to TS4821 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4961 7 Piece Ball Joint Tool Set for 1994-1999 Dodge and 1980-2004 Ford Dana 50 & Dana 60 Axles.

Link to TS4961 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joint Installers, Individual

top_page
product note

Buy just the adapters you need to perform Ball Joint service on a variety of 4x4 vehicles. Most adapters have either a Black Oxide or Black Paint finish for protection from corrosion. Adapters are manufactured to fit Ball Joints with original equipment external dimensions. Some aftermarket Ball Joints may require different installation adapters. All QT-prefix Ball Joint Tools are 100% USA made by us here in Roberts, Montana. All T prefix tools are Made in U.S.A., all M-prefix and M-suffix tools are imported from China.

photo

QT1067 Ball Joint Installer Ball Joint Installer is used to install both Upper and Lower Ball Joints on 2000-2002 Dodge Ram 2500 and 3500 4x4 trucks. Also installs the Upper Ball Joint in 2003-current Dodge 2500 and 3500 4x4 trucks (plus works with some 2003-up Aftermarket Lower Ball Joints) 7/16" Hole in Cap.

Link to QT1067 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1142 Ball Joint Installer is used to install the Upper Ball Joints on Model 30, Model 44, Model 50 and 60 axles from 1969-current. 7/16" Hole in Cap.

Link to QT1142 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1155 Ball Joint Installer works on 2003-current Dodge Ram axles to press in the Lower Ball Joint. 7/16" hole in cap.

Link to QT1155 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joint Removers, Individual

top_page
product note

Buy just the adapters you need to perform Ball Joint service on a variety of 4x4 vehicles. Most adapters have either a Black Oxide or Black Paint finish for protection from corrosion. Adapters are manufactured to fit Ball Joints with original equipment external dimensions. Some aftermarket Ball Joints may require different installation adapters. All QT-prefix Ball Joint Tools are 100% USA made by us here in Roberts, Montana. All T prefix tools are Made in U.S.A., all M-prefix and M-suffix tools are imported from China.

photo

QT1066 Lower Ball Joint Removal Receiver for 2000-2002 Dodge Ram 2500 and 3500 4x4 trucks. Machined to fit the Knuckle recess surrounding the Lower Ball Joint. 7/16" Hole in Cap.

Link to QT1066 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1140 Lower Ball Joint Removal Receiver for Ball Joint Model 50 and 60 axles from 1980-current. Machined to fit the Knuckle recess surrounding the Lower Ball Joint. 7/16" Hole in Cap.

Link to QT1140 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1141 Upper Ball Joint Removal Receiver for Model 30, Model 44, Model 50, and 60 axles from 1969-current. Machined to fit the Knuckle recess surrounding the Ball Joint. 7/16" Hole in Cap (Also see QT1185).

Link to QT1141 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1153 Ball Joint Receiver works on 2003-current Dodge Ram axles when removing both Upper and Lower Ball Joints, plus it is used to install the Lower Ball Joint Seals on the same trucks. 7/16" hole in cap.

Link to QT1153 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

C-Frame Press

top_page
product note

Buy just the adapters you need to perform Ball Joint service on a variety of 4x4 vehicles. Most adapters have either a Black Oxide or Black Paint finish for protection from corrosion. Adapters are manufactured to fit Ball Joints with original equipment external dimensions. Some aftermarket Ball Joints may require different installation adapters. All QT-prefix Ball Joint Tools are 100% USA made by us here in Roberts, Montana. All T prefix tools are Made in U.S.A., all M-prefix and M-suffix tools are imported from China.

photo

QT1065M Long Throat C-Frame Ball Joint Press Are designed to accept a variety of interchangeable tooling for performing Ball Joint and Universal Joint service on your 4x4.

Link to QT1065M Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Press Stubs and Press Sleeves

top_page
product note

Buy just the adapters you need to perform Ball Joint service on a variety of 4x4 vehicles. Most adapters have either a Black Oxide or Black Paint finish for protection from corrosion. Adapters are manufactured to fit Ball Joints with original equipment external dimensions. Some aftermarket Ball Joints may require different installation adapters. All QT-prefix Ball Joint Tools are 100% USA made by us here in Roberts, Montana. All T prefix tools are Made in U.S.A., all M-prefix and M-suffix tools are imported from China.

photo

QT1069 4x4 Ball Joint Adapter Is used with our long-throat C-Frame presses when installing or removing Ball Joints on many popular Dana 50 and Dana 60 4x4 front axles in 1994-2002 Dodge or 1980 and newer Ford trucks. Made by us here in Montana from a solid billet of U.S.A. produced high strength steel.

Link to QT1069 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1147 Press Stub is machined to fit either end of 1065 series Presses. Used in conjunction with the appropriate receiver to remove both Upper and Lower Ball Joints from most 4x4's where the Ball Joint is pressed into the Steering Knuckle.

Link to QT1147 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1148 Press Sleeve is used when installing the lower ball joint on 2003-up Dodge Ram 2500 and 3500 trucks. It is also used to install the Lower Ball Joint and to seat the Lower Ball Joint Stud on Dana Model 50 and 1992-2004 Dana 60 axles.

Link to QT1148 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1152 Press Stub is used to press out both the Upper and Lower Ball Joints on many late model Dodge trucks.

Link to QT1152 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1154 Press Sleeve is used when installing the Upper Ball Joint on 2003-up Dodge Ram 2500 and 3500 trucks.

Link to QT1154 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1223 Press Sleeve is used when installing the lower ball joint on 2005-up Ford Super Duty Dana Super 60 axles in F250 and F350 trucks.

Link to QT1223 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Discontinued Tools

top_page
product note

The following is a list of tools that have been discontinued and are no longer available.

photo

QT1054 Lower Ball Joint Installer For use with a regular hydraulic Shop Press (Not for use with C-Frame Press). Discontinued.