Bearing Cup Installers

Bearing Cup Installers are the key to damage free bearing cup installation. Completely seat those bearing cups without nicks or dings. Eliminates one of the most common causes of premature bearing failure, namely improper installation with punches or other makeshift tools. Precision machined solid steel tool is drilled to accept any driver handle with a 5/8" tip. We recommend an 8" handle for most applications and a 14" handle for deep set inner pinion, rear hub and transmission bearing cups. Made in U.S.A.

Bearing Cup Installer Applications

top_page
photo

QT1801 Wheel Bearing Cup Installer is used to install the popular JLM104910 and LM104911 Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep full sizes SUV's, 1/2, 3/4 and 1 ton trucks from 1968 to current, plus M802011, NP728109, and NP882000 Cups found in axles and transmissions.

Link to QT1801 Catalog Page

Front 4x4 Inner Wheel Bearing Cup Applications Chevy/GMC: Full Size Blazer, Jimmy, Suburban 1977½-1991
Chevy/GMC: K10, K15, K1500 1/2 ton Pickup 1977½-1987
Chevy/GMC: K20, K25, and K2500 3/4 ton Pickup 1977½-1987
Dodge: W150, W250 with gas engine 1980-1993
Ford: F250 1976-1996 F-250 with Model 44 axle and internal spline hub
Jeep: All Full size Cherokee, Wagoneer, J10, and J20 1977½-1991
Toyota:Land cruiser, 4 Runner & Pickup 1976-1998

Front Outer Wheel Bearing Applications Chevy/GMC: 1977-1991 K30, K35, V30, V3500 Model 60 Axle
Dodge: 1975-1993 W300, W350 and 1989-1993 W250 Diesel
Ford: 1976-97 F350, 1978-79 F250w/Model 60, 1980-97 F250 w/Model 50 IFS
Ford: Bronco & F150 1987-1991 Axle Tag #'s 610267, 610309, 610311

Rear 3/4 and 1 Ton Outer Wheel Bearing Applications
Chevy/GMC: 1973-2007 3/4 & 1 Ton C/K/G Full Float Rear Axle(Use flat side)
Dodge: All 3/4 and 1 ton trucks 1977-current
Ford: F-250, F-350 1968-current (except Dana 80)

Rear 3/4 Ton Inner Wheel Bearing Applications
Dodge
: 1977-1993 Light duty 3/4 ton with Dana 60 & gasoline engine
Ford: F-250 1968-1984 Most with Dana 60 Rear
Toyota:
Land Cruiser with full float rear axle 1975-1997

Rear Axle Inner Pinion Bearing Applications
Chevy/GMC: ½ ton SUV/Truck with GM 10 Bolt 8.5" rear axle 1977-1997
Dodge: Dakota 1986 -up with 8.25 Ring Gear
Dodge: 1/2 Ton & Light Duty 3/4 Ton 1980-2003 with 8.25" & 8.375" Rear Axles
Ford: Bronco II, Ranger, Explorer 1983-up with 7.5" & 8.8" Rear Axles
Ford: Bronco, F150, Light Duty F250 1983-up with 8.8" Rear Axle
Jeep: CJ 1976-1985 with AMC 20 Rear Axle
Jeep: Full Size Cherokee, Wagoneer, J10 1/2 ton Truck 1984-1985 w/AMC 20
Jeep: Cherokee, Grand Cherokee 1991-2001 with Chrysler 8.25" Rear Axle

Rear Axle Outer Pinion Bearing Applications
Chevy/GMC: 1973-1999 ¾ & 1 ton with GM 14 Bolt 10.5" Rear Axle
Ford: F450 with Dana 80 1999-2004
Dodge: 2500, 3500 with Dana 80 (mostly Diesel & manual transmission) 1994-2002

Transmission Bearing Cup Applications
New Venture NV4500: Input Shaft 1992-2007
New Venture: NV5600 Countershaft Center, 6 speed used by Dodge 1999-2005

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1802 Bearing Cup Installer installs LM102910 and LM501310 Front Wheel Bearing Cups on many lighter 4x4's. Also installs the NV4500 5 speed front counter shaft cup.

Link to QT1802 Catalog Page

Front Inner Wheel Bearing Applications
IHC: Scout 1963-1980
Jeep: CJ5/6/7/8 1962-1986, All Jeeps Commando and Scrambler
Jeep: J Series Light Duty 1963-1972

Front Outer Wheel Bearing Applications
Chevy/GMC: Full Size Blazer/ Jimmy & Suburban 1967-1991
Chevy/GMC: 1/2 Ton K10/15/K1500/V1500 1957-1987
Chevy/GMC: 3/4 Ton K20/25/2500/V2500 1959-1987
Ford: Bronco: 1966-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311
Ford: F100/150: 1959-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311
Ford: F250 Model 44 Axle: 1959-1988
Dodge: W100 1969-1974, W150 1980-1993, W250 (Gas) 1980-1993
IHC: Scout 1963-1980
Jeep: CJ5/6/7/8 1962-1986, All Jeeps Commando and Scrambler
Jeep: 1962-1991 J-Series Full Size Cherokee, Wagoneer, Pickup, FC150
Toyota: Land cruiser, 4 Runner & Pickup 1976-1998

Rear Outer Wheel Bearing Applications
Toyota:
Land cruiser with full float rear axle 1975-1997

Transmission Applications
NV4500 5 Speed
: Countershaft Front 1992-2007

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1803 Cup Installer for LM603011 races is used on many light duty Ford Front Inner Wheel Bearing Cups and early Dodge, GM, IHC, and Jeep 1/2 ton models.

Link to QT1803 Catalog Page

Front Inner Wheel Bearing Applications
Chevy/GMC: K5 Blazer/Jimmy, K10/15 1/2 ton Pickup & Suburban 1958-early 1977
Dodge:
W100 1969-1974
Ford
: Bronco: 1966-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311
Ford: F100/150: 1959-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311
IHC: 1/2 Ton with 5 bolt wheel and axle models FA16, 17, 46
Jeep: J-Series Full Size Cherokee, Wagoneer, 1/2 ton Pickup 1974 early 1977

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1804 Cup Installer for installing 382A, 28622, and NP064306 Bearing Cups in many 3/4 and 1 ton wheel hubs.

Link to QT1804 Catalog Page

Cup Installer Front Inner Wheel Bearing Applications
Chevy/GMC:
K30, K35, K3500 1 Ton 1977-1991
Ford: 1973-2004 E350 Van with full float rear (most)
Ford: 1999-up F250 & F350 Super Duty® (10.5" rear axle)
Ford:
Super Duty® F350 with Dual Rear Wheel Dana 80 1999 up

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1805 Wheel and Pinion Bearing Cup Installer for 362A inner wheel bearing cup and HM803110 pinion bearing cup.

Link to QT1805 Catalog Page

Cup Installer Front Inner Wheel Bearing Applications
Chevy/GMC: K20, K25, ¾ Ton 1960-1977½ (External 6 bolt hub or drive flange)
Ford: F250 Heavy Duty Models 1959-Early 1977 (External 6 bolt hub or drive flange)
Jeep: 1974-1977 3/4 ton J4800, J20 (External 6 bolt hub or drive flange)

Cup Installer Rear Inner Wheel Bearing Applications
Jeep:
3/4 ton with Full Float Rear Axle 1970-1973

Inner Pinion Bearing Cup Applications
Dana 60, 61 Front Axle:
1976-2004
Dana 60, 61 Rear Axle: 1954-up
Dana 70U, 70-2URear Axle: Ford 1980-2002, Dodge 1983-2002

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1806 Bearing Cup Installer is used on heavy duty 3/4 and one ton truck rear axles for 453X and 45520 inner wheel bearing cups and M807010 inner pinion bearing cups. 45220 is also used in NV5600 transmissions.

Link to QT1806 Catalog Page

Front Inner Wheel bearing Applications
IHC:
1600 4x4

Rear Inner Wheel Bearing Applications
Dodge: 1976-1993
D350, W350 with Dual Rear Wheels
Dodge: 1994-2010
All Ram 3500 with Dual Rear Wheels
Jeep:
1967-1969 M715, M725, M726 1¼ Ton Military Truck

Rear Axle Inner Pinion Bearing Cup Applications
Chevy/GMC
1 Ton Dual Rear Wheel with Dana 70B and 70HD 1973-1990
Chevy/GMC:
Motor Home, GMT455, P-Truck 1990-1999 with Dana 80
Chevy/GMC:
C/K3500 Dual Rear Wheel with GM/AAM 11.5" Rear Axle 1997-up
Dodge:
W300, W350 1957-Early 1984 All with Dana 70 Rear Axle
Dodge:
2500 & 3500 1994-2002 with Dana 80 Rear Axle
Dodge:
2500 & 3500 2003-up with AAM 11.5" Ring Gear Rear Axle
Ford:
Super Duty F450 with Dual Rear Wheel Dana 80 1988-1998
IHC:
1968-1975 All with Dana 70 Rear
Jeep:
FC170 & J-Series 1 Ton Trucks with Dual Rear Wheels (Dana 70) 1957-1968
Jeep:
1967-1969 M715, M725, M726 1¼ Ton Military Truck

Transmission Bearing Cup Applications
New Venture:
NV5600 Mainshaft Center, 6 speed used by Dodge 1999-2005½

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1807 Bearing Cup Installer installs 3920 inner wheel bearing cups on Ford F250 and F350 trucks with Ford 10.25" rear axles. Also installs 39520 Bearing cups used on medium duty trucks in both front inner and rear outer wheel bearing applications.

Link to QT1807 Catalog Page

Rear Inner Wheel Bearing Applications
Ford:
1985-1998 Ford F250, F350 with 10.25" Ford Rear Axle
Ford: 1988-98 F450 with F53 and F54 Rear Axles

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1808 Bearing Cup Installer is for installing JLM506810 outer wheel bearing cups on some 1990's model 1 ton trucks.

Link to QT1808 Catalog Page

Rear Outer Wheel Bearing Applications
Chevy/GMC
1997-1999 P-Series with 4 wheel disc brakes
Ford: 1988-98 F450 with F53 and F54 Rear Axles

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1810 Bearing Cup Installer installs 14276 output shaft bearing cups in Dana 18, 20 and 21 transfer cases.

Link to QT1810 Catalog Page

Transfer Case Front Output Shaft Front Bearing Applications
Ford:
Bronco 1966-1976 Dana 20 Transfer Case
Ford:
F100 with 3 speed transmission and Dana 20 Transfer Case 1966-1976
Ford:
F100 with 4 speed transmission and single speed Dana 21 Transfer Case
IHC:
All Scout with Dana 20 Transfer Case
Jeep:
1972-1973 All
Jeep: 1974-1979 All models with manual transmissions

Transfer Case Rear Output Shaft Bearing Applications
IHC:
Scout 1961-1972 with Dana 18 Transfer Case
Jeep: All models (except M715 series) 1946-1971

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1811 Bearing Cup Installer installs the 15245 rear output shaft rear bearing cup in Dana 20 and 21 transfer cases.

Link to QT1811 Catalog Page

Transfer Case Rear Output Shaft Rear Bearing Applications
Ford:
Bronco 1966-1976 Dana 20 Transfer Case
Ford:
F100 with 3 speed transmission and Dana 20 Transfer Case 1966-1976
Ford:
F100 with 4 speed transmission and single speed Dana 21 Transfer Case
IHC:
All Scout with Dana 20 Transfer Case
Jeep:
1972-1973 All
Jeep: 1974-1979 All models with manual transmissions

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1812 Bearing Cup Installer installs HM88510, HM88610, 25821, 02820 bearing cups in a wide variety of vehicles from small Jeep CJ's to massive Ford Super Duty's® plus many Dana axles and transfer cases.

Link to QT1812 Catalog Page

Transfer Case Rear Output Shaft Front Bearing Applications (25821)
Ford:
Bronco 1966-1976 Dana 20 Transfer Case
Ford:
F100 with 3 speed transmission and Dana 20 Transfer Case 1966-1976
Ford:
F100 with 4 speed transmission and single speed Dana 21 Transfer Case
IHC:
All Scout with Dana 20 Transfer Case
Jeep:
1972-1973 All
Jeep: 1974-1979 All models with manual transmissions

Front Outer Pinion Bearing Cup Applications
Chevy/GMC:
K2500 & K3500 9.25" Ring Gear IFS Axle 1988-2007

Front Inner Pinion Bearing Applications
AMC:
Eagle
Dodge:
1500 1994-2001
Ford:
F250 with 4600 lb. Dana Model 50 Twin Traction Beam IFS Axle 1980-1988
Ford:
F250 All 1989-1998
Ford:
F350 with Dana Model 50 Twin Traction Beam IFS Axle 1980-1984
Ford:
Bronco, F-150 Model 44 IFS Axle 1992.5-1996
Ford:
F250, F350 Single Rear Wheel Dana Model 50 Monobeam Axle 1999-2004
Jeep:
All CJ, TJ, WJ, XJ, YJ, ZJ with Model 30 Front Axles 1972-up

Dana Axle Models 25, 27, 30, 44, 50, 53 Outer Pinion Bearing Cup (02820)
Chevy/GMC:
1960-1980
Ford: 1959-2004
Dodge: 1957-2001
IHC: 1956-1980
Jeep: 1942 to Present

Heavy-Duty Outer Pinion Bearing Cup Applications:
Chevy/GMC: 1500HD & 2500 with 14 bolt 9.5" Ring Gear 1981-2002
Dana Axle:
Models 60, 61, and 70 1954 to present. These axle models are found in many heavy 1/2 ton, 3/4 ton, and 1 ton front and rear axles used by Chevy/GMC, Dodge, Ford, IHC, and Jeep. The Dana 70 was also used by Dodge and International as a front axle on 1-1/2 ton trucks.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1813 King Pin Cup Installer installs 23256 King Pin Bearing Cups on many 1993 and older heavy duty 4x4 trucks.

Link to QT1813 Catalog Page

Application: Dana 44HD Closed Knuckle (12 Bolt Ball Seal)
Chevy/GMC: K20/K25 Heavy Duty Model 1967-1969
Dodge: W200 Heavy Duty 1967-1972
Ford: F250 Heavy Duty Model 1969-1975
IHC: 200, 1200 Heavy Duty Model 1967-1975

Application: Dana 60, 70 Closed Knuckle
Dodge: W200 Crew Cab & W300 1967-1975, W600 1974-1978
Ford: F250 Crew Cab 1974-1977
IHC: 1300 1968-1975, 1600 1967-1982
Jeep: M715, M725, M726 1¼ Ton Military 1967-1969

Application: Dana 60, 61 Open Knuckle, Lower Bearing Cup
Chevy/GMC: 1ton K/V Series -1977-1991
Dodge: W300 & 350 1975-1989, W250 Diesel 1989-1993
Ford: F150 Super Cab 1978-79, F250HD & F350 1977-1979, F350 1985-1991

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1814 is for setting 354A cups in vintage rear wheel hubs.

Link to QT1814 Catalog Page

Rear Outer Wheel Bearing Applications
Dodge: W200 1959-1973
Dodge: W300 1964-1976 Most with Dana 60
Ford: F350 1946-1952

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1816 Inner Pinion Bearing Cup Installer for NP434567, HM804810 and HM903210.

Link to QT1816 Catalog Page

Front Inner Pinion Bearing Cup Applications
Chevy/GMC:
K2500 & K3500 9.25" Ring Gear IFS Axle 1988-2007

Rear Inner Pinion Bearing Applications
Chevy/GMC:
1500HD & 2500 with 14 bolt 9.5" Ring Gear 1981-2002
Chevy/GMC: 2500 & 3500 with 2nd design 14 bolt 10.5" Ring Gear 1988-2002
Ford: F-150 with 9¾" Axle 1999-2004

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1818 Axle and Transfer Case Bearing Cup Installers are used to install 2720, 31520, HM89410 cups in many 4x4 applications.

Link to QT1818 Catalog Page

Inner Pinion Bearing Applications
Chevy/GMC:
HO33 Rear Axle 1953-1956, 1960-1964
Chevy/GMC: HO35, HO35 8-7/8" Rear Axle 1965-1979
Dodge:
Dana-Spicer: All Model 44 1950-1993, Jeep 1956-current
Ford: 9" Heavy Duty 1964-1976
Jeep: 1946-1972 All with Dana 25 Front Axle or 1946-1961 Dana 25 Rear Axle

Rear Outer Pinion Bearing Applications
Rockwell: A150 1953-1955 Ford 1/2 and 3/4 Ton

Transfer Case Bearing Cup Applications
New Process:
NP200, NP201, NP205 Idler Shaft

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1819 King Pin Cup Installer installs the small 11520 King Pin Bearing Cups on many 1975 and older light duty 4x4 trucks and SUV's.

Link to QT1819 Catalog Page

Application: Dana 25, 27, 30, and 44 Closed Knuckle (8 Bolt Ball Seal)
Chevy/GMC: K10/15 and K20/K25 1960-1969
Dodge: W100 & W200 Light Duty 1957-1970
Ford: F100 1959-1966
Ford: F250 Light Duty 1959-1975
IHC: Scout, 100, 200, 1200 Light Duty Models 1953-1971
Jeep: All except M715 Series 1941-1971

Application: Dana 30 and 44 Open Knuckle
Ford: Bronco and F100 1966-1972

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1820 Outer Pinion Bearing Cup Installer for M88010 cups.

Link to QT1100 Catalog Page

Front Outer Pinion Bearing Applications
Chevy/GMC
: Full Size Blazer, Jimmy, Suburban 8.5" 10 Bolt Axle 1977½-1991
Chevy/GMC: K10, K15, K1500 1/2 ton Pickup 8.5" 10 Bolt Axle 1977½-1987
Chevy/GMC: K20, K25, and K2500 3/4 ton Pickup 8.5" 10 Bolt Axle 1977½-1987
Chevy/GMC: K1500 & K2500 with 8.25" IFS Axle 1988-2003

Rear Outer Pinion Bearing Applications
Chevy/GMC: All with 8½" & 8-5/8" 10 Bolt Rear Axle 1977-2003
Chevy/GMC: All Blazer, K10/15 with 8-7/8" Ring Gear 1964-1981
Dodge: 1/2 ton with 8-7/8" Ring Gear 1966-1974
Dodge: 1/2 ton with 9¼" Ring Gear 1969-2003
Ford: Bronco, F100, F150 with 9" removable carrier axle 1957-1986
Ford: F150, F250 Light Duty, Bronco with 8.8" Rear Axle 1983-2004
Jeep: CJ and Scrambler with AMC 20 1976-1985
Jeep: Full Size Cherokee, Wagoneer, J10 with AMC 20 1980-1985

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1824 Inner Pinion Bearing Cup Installer For NP673386 cup for the Inner Pinion Bearing on 1999-2010 Ford Super Duty Dana 80 Dual Rear Wheel rear axles.

Link to QT1824 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1830 Bearing Cup Installer Has a tighter fit for installing QU50535 bearing cups. Preferred by many professional Dana axle techs over our QT1818 installer.

Link to QT1830 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Driver Handles

top_page
photo

QT1100 1" x 8" Driver Handle

Link to QT1100 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1101 1"x 14" Driver Handle

Link to QT1101 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1116 1¼" x 8" Driver Handle

Link to QT1116 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1119 1¼" x 14" Driver Handle

Link to QT1119 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!