Parts for 1959-1971 Dana-Spicer Model 60 Rear Axles in Dodge Trucks

The Dana 60 Rear Axle was used by Dodge on a number of 1/2 ton, 3/4 ton and 1 ton civilian trucks and vans from 1959-1971. While we have most of the common parts, we usually will not have any of the major components available.

Axle Shafts and Axle Shaft Hardware

top_page
photo
QU40577 Tapered Locking Bushing Cone for Dana 60 Rear Axle Shafts Fits 1961-1971 Dodge Dana 60 rear axles in 3/4 and 1 ton trucks. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.
Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing
Link to QU40577 Large Text Individual Product Page
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Case

top_page
photo

QU42120U Used 16 Spline Dana 60 Loaded Open Differential Case for 4.10 and faster gear ratio Dana 60 axles in 1975 and older trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings, Individual

top_page
product note

Over the years, Dana has primarily used Timken bearings when building their axles. For long life and dimensional consistency, Timken bearings are unmatched by any other brand of bearing I have used rebuilding axles over the past 30+ years in the business. When you are a shade tree mechanic dealing with a diff and pinion rebearing job without all the fancy gauging tools we have, you always want your new bearings to be the same overall thickness as the original bearings were when the axle was built so your pinion depth, pinion preload and backlash are within the tolerance limits when you are done with the job. Timken bearings will almost always deliver that type of accuracy, plus the steel quality and surface finish is the world's best.

photo
QU50397 Differential Bearing Cup For Dana Model 60 Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50398 Differential Bearing For Dana Model 60 Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50400 Outer Pinion Bearing Cup For Dana Model 60 Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50401 Outer Pinion Bearing For Dana Model 60 Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50406 Inner Pinion Bearing Cup For Dana Model 60 Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50407 Inner Pinion Bearing For Dana Model 60 Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearing Kits

top_page
photo
QU50491 Differential Bearing & Seal Kit for Dana Model 60 Rear Axles in 1961-1971 Dodge D-200 4x4 and W-200 4x4 3/4 ton trucks. This kit includes: QU50400 Outer Pinion Bearing Cup, QU50401 Outer Pinion Bearing, QU50406 Inner Pinion Bearing Cup, QU50407 Inner Pinion Bearing, 2 QU50397 Differential Bearing Cups, 2 QU50398 Differential Bearings; QU51065 early and QU50565 late, aftermarket pinion seal; QU50566 aftermarket pinion nut, QU50567 aftermarket differential and pinion shim kit; and QU90009 axle service pack. Contains USA and imported parts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Parts

top_page
product note

Differential problems with Dana 60 rear axles are not all that common. But Murphy, of Murphy's Law* really likes busted differentials, so when you hear that loud, heart-stopping, ominous BANG from the rear axle as your truck lurches to a grinding stop, you just KNOW it is one big dose of bad news. To help get you back on the road after you get rescued, we stock genuine original equipment Dana-Spicer Front Axle Differential Parts for your hard working Dodge truck.
*Murphy's Law: "Anything that can go wrong, will go wrong"

photo
QU40518 Differential Pinion Mate Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each pinion mate gear and the differential case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40041 Differential Side Gear Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each side gear and the differential case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40520 Differential Cross Shaft for Open Differentials
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40519 Lock Pin for Differential Cross Shaft for Open Differentials is used to lock QU40520 differential cross shaft to the diff case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets

top_page
product note

In the mid 1970's Dana made a differential cover design change to heavy gauge covers with flat mating flanges. Unlike the previous, thin gauge covers with embossed flanges which were made for use with a cut gasket, the new design, thick gauge covers are designed for sealing with RTV. If you desire, you can still use a gasket with the new type cover by combining the gasket with thin films of RTV. We stock both Ultra Gray RTV Sealant and genuine Dana Gaskets.

photo
QU40367 Rear Differential Cover Gasket For Model 70 Axles. These genuine Dana-Spicer gaskets will also work on Dana 60 axles. Dan the Gear Man Tech Note: RTV sealant instead of Gaskets were used during the factory assembly of your axle
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes. The perfect choice to seal the differential cover on your Dodge Dana 60
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40078 Dana 60 8 Bolt Steel Rear Axle Shaft Flange Gasket Is a genuine original equipment Dana-Spicer embossed steel gasket that fits 1960's Dodge Dodge Dana 60 rear axle applications that do NOT use an outer wheel seal sandwiched between two gaskets
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Manuals

top_page
product note

Knowing how to do the job right the first time is half the battle. With our detailed, easy to read, and well illustrated technical publications, you get accurate service procedures, torque specifications, and tool recommendations.

photo

TM4400 Pinion and Differential Bearing Service On Dana-Spicer Monobeam Axles covers step by step in text and photos the differential service procedures, specifications, and tools needed to replace differential and pinion bearings in Dana Spicer front or rear drive axles.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
product note

Proper lubrication and replacing damaged or worn small parts is often the difference between a first class, long-term repair and a short lived nightmare. In this section are the small parts and accessory items that do not neatly fit under our other parts headings.

photo
S24200 Blue Threadlocker For spindle and ring gear bolts etc.
Link to our S24200 Large Text Catalog Page for more detail & tech info
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90008 Gear Marking Compound Use with QT9404 Brush to check your ring and pinion gear tooth pattern
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
Anti-Seize Lubricant Use between the spindle and knuckle mating surfaces to prevent rust bonding
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90018 Pyroplex® Protection ES Synthetic Grease Provides extended service protection for king pin, axle universal joint, and wheel bearing applications under the harshest on and off road conditions!
Link to our QU90018 Large Text Catalog Page for more detail & tech info
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
SynPower ® is a superior quality, moly-fortified, Synthetic Bearing/Chassis Grease for all U.S., European, and Japanese Vehicles. Use on disc and drum brake wheel bearings, chassis, suspension, universal joints, and CV joints
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
Syncon High Performance Synthetic Arctic Grease Is an extreme pressure, premium quality, synthetic cold weather grease that provides exceptional protection for bearings and chassis components in sub-zero weather
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
707L Red Grease Is a premium, extreme pressure, high performance wheel bearing grease with special additives providing excellent rust protection and high resistance to water washout. 707L is an high quality, non-synthetic grease suitable for all 4x4 and light truck disc and drum brake wheel bearing applications, plus it is an ideal grease for chassis lubrication. Available in 14 oz. cartridge or 1 pound tub
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40218 4 Ounce Limited Slip Lube Is supplied by Dana-Spicer for all Powr-Lok limited-slip differentials in 1984.5-1993 Dodge D250, W250, D350, and W350 trucks with Dana 70 Rear Axles
Link to our QU40218 Large Text Catalog Page for more detail & tech info
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.
Link to our QU90009 Large Text Catalog Page for more detail & tech info
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Yokes and Pinion Seals

top_page
product note

Dodge used a number of different Pinion Yokes for 1968-1971 Dana 60 Rear Axles with 29 spline pinion shafts. Replacement recommendations for the various u-joint sizes are:
Detroit 7260 1.078" cups, 2-1/8" inside lock-up: QU10087U Yoke or QK4878 Conversion Yoke Kit
Detroit 7290: 1.125" cups, 2-5/8" inside lock-up: QU40747 Yoke
Detroit 5380: 1.232" cups, 3" inside lock-up: QK4650 Yoke Kit + special order QU40898 Conversion Joint

photo
QU40097 Dana 60 Pinion Seal For 1961-1971 Dodge D200 and W200 trucks with Dana 60 Rear Axles
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40747 7290 Series 29 Spline Dana 60 Pinion Yoke For Dodge Ram Rear Axles Genuine original equipment yoke fits those 1968 to 1971 Dodge Vans and pickups with Dana 60 Rear Axles and Detroit 7290 series inside C-Clip retained universal joints that have 1.125" diameter cups. Inside dimension between Yoke Ears is 2-5/8"
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40763 7290 U-Joint Strap and Bolt Kit for 1961-1971 Dodge trucks and vans with 7290 series rear driveshaft u-joints. Special small head, hardened bolts for attaching the driveshaft to the front axle pinion yoke. 7290 series u-joints have internal C-Clips, 1-1/8" diameter cups and fit yokes measuring 2-5/8" between the ears
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11087U Used 29 Spline 7260 Series Pinion Yoke for Dodge Dana 60 Rear Axles For 1968-1971 Dodge trucks with Dana 60 axles and Detroit 7260 series inside C-Clip retained universal joints that have 1.078" diameter cups. Inside dimension between Yoke Ears is 2-1/8"
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4878 1310 Series x 7260 Series Conversion Pinion Yoke Kit for Dodge Dana 60 Axles Includes a strong, solid cross special conversion u-joint that allows to to replace your damaged original Dodge Pinion Yoke made for 7260 series u-joints with a new pinion yoke that accepts a Spicer series u-joint. Just install the new parts and bolt your old driveshaft to the new pinion yoke!
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40729 7260 U-Joint Strap and Bolt Kit With special small head, hardened bolts for attaching the driveshaft to your rear axle pinion yoke. This Strap and Bolt Kit is used to secure Dodge (Detroit Universal) 7260 series universal joints with 1.078" diameter cups to axle pinion yokes with an inside yoke width of 2-1/8"
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
product note

Sometimes, you just need one or two small parts to get back on the road. Between the small parts listed in this section and many others listed under part specific headings elsewhere on the page, we probably have that pesky little part you have to have but just can't find anywhere else.

photo
QU40343 Dana 60 Hardened Differential Cap Retaining Bolt Genuine original equipment hex-head bolt for Dana Spicer Model 60 and 61 front axle differential bearing caps. Fits all 1959 to 1971 Dodge trucks with Dana 60 rear drive axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40022 Dana 60 Pinion Nut Genuine original equipment pinion nut for Dana Spicer Model 60 and 61 front axle differential bearing caps.Fits all 1959 to 1971 Dodge trucks with Dana 60 rear drive axles. QU40022 is a genuine original equipment, self-locking nut, intended for a single use part, discard and replace with a new nut any time you remove the pinion nut
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40023 Dana 60 Pinion Washer for Dodge Ram is a genuine original equipment flat washer goes between the pinion nut and pinion yoke.Fits all 1959 to 1971 Dodge trucks with Dana 60 rear drive axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40206 Dana 60 Differential Bearing Shim Kit Includes a selection of genuine original equipment Shims for adjusting backlash and differential bearing preload on your 1959 to 1971 Dodge truck with Dana 60 rear drive axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50816 5 Piece Basic Pinion Preload Shim Kit For all 1959 to 1971 Dodge trucks with Dana 60 rear drive axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40099 Dana 60 Outer Pinion Slinger Fits between the outer Pinion Bearing and Pinion Yoke. QU40099 is a genuine original equipment Dana Spicer part. Fits all 1959 to 1971 Dodge trucks with Dana 60 rear drive axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40086 Dana 60 Ring Gear Bolt For Dana 60 rear axle. Genuine Dana-Spicer Grade 9 Bolt has locking teeth under the hex head to prevent loosening under any load conditions.

Dan the Gear Man® Safety Note: Ring Gear Bolts are designed for a single use. They must be replaced after they are removed!

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40577 Tapered Locking Bushing Cone for Dana 60 Rear Axle Shafts Fits 1961-1971 Dodge Dana 60 rear axles in 3/4 and 1 ton trucks. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.

Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing

Link to QU40577 Large Text Individual Product Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindle Nuts and Spindle Nut Hardware

top_page
photo

QU40027 Rear Dana 60 Bend Over Tab Spindle Nut Lockwasher For 1959 to 1968 100 series, 1959-1971 200 series, and 1964-1971 300 series Dodge trucks with Dana 60 full float rear axles having 1-13/16" diameter spindle threads. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40026 Rear Dana 60 2-3/8" Hex Spindle Nut For 1959 to 1968 100 series, 1959-1971 200 series, and 1964-1971 300 series Dodge trucks with Dana 60 full float rear axles having 1-13/16" diameter spindle threads. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing and Seals, Individual

top_page
photo
QU50658 Timken® Outer Rear Wheel Bearing Cup For 1959-1971 Dodge trucks that have 1-13/16" rear axle spindle threads
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50659 Timken® Outer Rear Wheel Bearing For 1959-1971 Dodge trucks that have 1-13/16" rear axle spindle threads
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50568 1959-1971 Timken® Inner Rear Wheel Bearing Cup For 1959-1971 Dodge Dana 60 rear axles that have 1-13/16" rear axle spindle threads
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50569 1959-1968 Timken® Inner Rear Wheel Bearing For 1969-1971 Dodge Dana 60 rear axles that have 1-13/16" rear axle spindle threads
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU50891 1969-1971 Timken® Inner Rear Wheel Bearing For 1969-1971 Dodge Dana 60 rear axles that have 1-13/16" rear axle spindle threads
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50892 Inner Wheel Seal For 1969-1971 Dodge Dana 60 rear axles that have 1-13/16" rear axle spindle threads.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!