Constant Velocity Front Driveshaft Parts for 1994-2001 Dodge Ram 1500 4x4 Trucks

Driveshaft Identification

top_page
product note

Before ordering replacement parts, you should always verify that the parts being ordered will match the shaft in your truck. Besides the model year parts changes detailed below as the part style changes are not always exactly the same as the model year change. It is not really unusual to find some of these older Dodge 4x4s have been modified with different make/size front driveshafts. We have seen a few 1994-2001 trucks with replacement Saginaw CV shafts (last used by Dodge in 1993), larger size upgrade shafts especially in lifted, high horsepower trucks, and even some trucks with just single Cardan front shafts (no CV). While chances are your truck has all the factory parts, make sure before ordering!

photo

CV Joint: For the 1994 to 2001 model year Ram 1500 4x4 trucks, Dodge used 1330 series Double Cardan Constant Velocity (CV) front driveshafts. These shafts have a half-round flange type Spicer style Double Cardan CV joint with 1-1/16" diameter u-joint cups at the transfer case end.

photo

Slip Yokes: Three different slip joints were used depending upon the production date. 1994 to 1998 trucks had a fine spline with a u-joint with internal c-clips. 1999 used a fine spline yoke with a special u-joint using external snap rings in the slip yoke and internal C-clips for the pinion yoke. 2000-2001 used a joint with external snap rings in the slip yoke. No snap ring was used at the pinion yoke as side thrust is controlled by tabs cast into the pinion yoke. Yoke style changes are not always exactly the same as the model year change so some overlap may be encountered in 1998-1999 and 1999-2000 model years.

photo

Slip Joints Splines: Two different slip joint splines protected by rubber boots were used depending upon the production date. 1994 to 1998 trucks plus most if not all 1999 models would have a 1-9/32" fine spline yoke and stub. A few 1999, almost all 2000, and all 2001 shafts were built with an 1-3/8" coarse spline slip joint. Yoke style changes are not always exactly the same as the model year change so some overlap may be encountered in 1998-1999 and 1999-2000 model years.

photo

Front U-Joints: For the 1994 to 2001 model years, Dodge used 3 different front universal joints to connect the driveshaft to the front axle. 1994-1998 used a Detroit Universal 7290 series front joint that has 4 internal C-Clips to secure the u-joint cups in place. 1999 was a transition year that used a unique slip yoke and front universal joint. The model year changes are not necessarily absolute as the U.S. and Mexican factories had slightly different inventories and build schedules. For example: a late production 1999 may have the 2000 joint and an early 2000 might have the 1999 joint.

Boots and Boot Clamps

top_page
photo

QK3078 Slip Yoke Boot Kit for 1994-1999 Dodge Ram 1500 and some early 2000 Dodge Ram 1500 4x4 Front Drive Shafts. Includes Boot Clamps. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40132 Slip Yoke Boot Kit for 2000 Dodge Ram 1500 and 2001 Dodge Ram 1500 4x4 trucks. Includes Boot Clamps. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40085 Boot Clamp For the small (Slip Stub) end of slip yoke boots used on Dodge Ram front driveshafts 1994-1999 Dodge Ram 1500, plus some 2000 and 2001 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50138 Boot Clamp For the large (Slip Yoke) end of slip yoke boots used on Dodge Ram front driveshafts starting in 1994-1999 Dodge Ram 1500, plus some 2000 and 2001 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40133 Boot Clamp For the small (Slip Stub) end of slip yoke boots used on Dodge Ram front driveshafts from 2000 Dodge Ram 1500 to 2001 Dodge Ram 1500 with slip yokes that use external snap rings to retain the universal joint. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40084 Boot Clamp For the large (Slip Yoke) end of slip yoke boots used on Dodge Ram front driveshafts from 2000 Dodge Ram 1500 to 2001 Dodge Ram 1500 with slip yokes that use external snap rings to retain the universal joint. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Double-Cardan Constant Velocity Parts

top_page
product note

We stock a complete line of original equipment quality replacement parts for rebuilding your Double-Cardan Constant Velocity (CV) Joint. As always, verify what size parts you have before placing your order

photo

QU40759 CV Center Yoke for 1994-2001 Dodge Ram 1500 4x4 front drive Constant Velocity shafts with U-Joints that have a Cup Diameter of 1-1/16". More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40800 CV Center Yoke for 1994-2001 Dodge Ram 1500 4x4 front drive Constant Velocity shafts with U-Joints that have a Cup Diameter of 1-3/16". More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40131 CV Flange Yoke Assembly for 1994-2001 Dodge Ram 1500 trucks. 4x4 front drive Constant Velocity shafts with U-Joints that have a Cup Diameter of 1-1/16". Includes Pre-assembled Flange, Ball, Seat, and Seal plus a new Spring. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40807 Ball Stud Tube Yoke for 1994-2001 Dodge Ram 1500 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40744 CV Centering Ball Kit For 1994-2001 Dodge Ram 1500 front driveshaft Double-Carden Driveshaft Constant Velocity Joints. If your cast iron CV Flange Yoke is in good shape, you can save $$ by just replacing your old Centering Ball and Socket with this Kit. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40829 Dodge Ram 1994-2001 Replacement CV Grease Seal For 1994-2001 Dodge Ram 1500 front driveshaft Double-Cardan CV Joint. This part is included in QU40744 Ball Kit and is part of QU40131 CV Flange. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40704 CV Outer Dust Seal For 1994-2001 Dodge Ram front driveshaft Double-Carden Driveshaft Constant Velocity Joints. This seal helps protect the CV Centering Ball from road splash and should be replaced any time the u-joints are changed. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40835 Spicer Type 1994-2001 Dodge Ram Replacement Front CV Joint Tension Spring For 1994-2001 Dodge Ram 1500 Double-Cardan CV Joint. This part is included in QU40744 Ball Kit and with QU40131 CV Flange. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Driveshaft Assemblies

top_page
product note

Our inventory of complete rebuilt driveshaft assemblies changes constantly due to a shortage of good rebuildable cores. If we have any rebuilt shafts in stock, they will be listed below. For new driveshafts, we offer money saving, unfinished, heavy duty 1350 series Double Cardan CV Shafts.

photo

QU40806 Unfinished Heavy Duty 1350x1330 Greaseable CV Shaft Assembly Is the lowest cost way to replace your worn out 1-1/16" cup size 1330 series oem shaft with a beefed up brand new, totally greaseable, 1-3/16" cup size 1350 CV x 1330 front joint Double Cardan Constant Velocity front driveshaft for your 1994 to 2001 Dodge Ram 1500. The CV Head is already welded to the tube, so all you have to do is determine what length to cut the tube before finishing the assembly. Welding and other machine shop skills and equipment is required to complete assembly!!!! More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40924 1350 Series Unfinished Heavy Duty Greaseable CV Shaft Assembly for 1994-2001 Dodge is the lowest cost way to replace your worn out Double Cardan Constant Velocity Dodge Ram 4x4 front CV driveshaft with a brand new, totally greaseable, 1-3/16" cup size CV U-Joints (1350 series) x 1-3/16" cup size front joint (1350 series) heavy duty Double Cardan Constant Velocity front driveshaft that you customize for length and complete the final assembly. The greaseable CV Head is already welded to the tube, so all you have to do is determine what length to cut the tube before finishing the assembly. The CV Flange will directly bolt to your original transfer case output flange. For the front axle, you will also need to replace your small original 7290 or 1330 series pinion yoke and hardware with 1350 series parts. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11185 New Rear Driveshaft with Slip Yoke and Flange Yoke for 2001 Ram 1500 regular cab with 118" wheel base and 46RE transmission. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Manuals

top_page
photo

TM3304 Front Constant Velocity Driveshaft Service Manual For 1994-1998 Dodge Ram. Step-by-step instructions with color illustrated photoes, 25 pages. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TM3317 Front Constant Velocity Driveshaft Service Manual For 1999-2001 Dodge Ram. Step-by-step instructions with color illustrated photoes, 26 pages. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TM3000 Driveshaft Service Manual Printed version, complete manual with individual chapters that covers all aspects of 4x4 and light truck driveshaft service. 80 pages. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous Parts & Lubricants

top_page
photo

QU40832 Driveshaft Tubing For 1994-2001 Dodge Front CV Shafts is an exact thickness replacement tubing for the 2.5" 0.095" wall thickness torque tube used in all original equipment 1994 to 2001 Ram1500 4x4 Double-Cardan Front Driveshafts. Sold in 1" increments for all your retube or lengthen jobs. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90018 Pyroplex® Protection ES Synthetic Grease provides extended service protection under the harshest on and off road conditions! This new NLGI #2 GC-LB grease is Hydro-Activated™ to become tackier when exposed to moisture. Offers superior corrosion and wear protection in a variety of environments. Provides excellent low and high temperature performance. Use to lubricate the CV Ball and Slip Yoke prior to assembly and for your greaseable universal joints. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

S9978 1 gram Blue 242 Threadlocker Is used on the bolt treads that attach your driveshaft to the transfer case and front axle. 1 gram packet. Also available in a 0.20 fluid ounce tube. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

S9975 5 gram Anti-Seize Lubricant Wiill keep the CV flange from rusting to the transfer case output flange when applied the the male-female pilot that centers the shaft flange to the output flange. 5 gram packet. Also available in a 1 ounce tube. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Rebuild Kits, Custom

top_page
product note

4x4 CV Shaft Rebuild Kits for 1994-2001 Ram 1500. Rebuild your front constant velocity driveshaft yourself with one of these affordable yet comprehensive QUADKITS® featuring heat treated, alloy steel, greaseable u-joints with nitrile rubber seals, CV Flange Yoke Assembly, and Threadlocker, plus you can order your Kit with our optional 25 page TM3304 Front Constant Velocity Driveshaft Service Manual for 1994-1998 Dodge Ram, or the 26 page TM3317 Front Constant Velocity Driveshaft Service Manual for 1999-2002 Dodge Ram. Both of these excellent printed publications feature color exploded views and over 100 color photographs. Made in U.S.A.

photo

QK3029 1500 CV Driveshaft Rebuild Kit For 1994-1998 Dodge Ram 1500 4x4 trucks with 7290 front U-Joint (all u-joint cups are 1-1/8" in diameter and use c-clips that seat against the inside faces of the yoke ears). Our optional TM3304 color illustrated Service Manual is available separately. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK3094 1500 CV Driveshaft Rebuild Kit For 1999 Dodge Ram 1500 4x4 trucks with 1330x7290 Conversion U-Joint. Our optional TM3317 color illustrated Service Manual is available separately. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK3073 1500 CV Driveshaft Rebuild Kit For 2000-2001 Dodge Ram 1500 4x4 trucks with 1330 U-Joints. Our optional TM3317 color illustrated Service Manual is available separately. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Rebuild Kits, Premium Torque King

top_page
product note

Torque King® Spicer CV Driveshaft Master Rebuild Kits for 1994-2001 Dodge Ram 1500 4x4 trucks. These complete Master Kits feature rugged, cold-forged, alloy steel, non-greaseable factory synthetic-lubed u-joints, CV Flange Yoke Assembly, CV Dust Seal, Driveshaft Boot Clamps and Threadlocker, plus you can order your Kit with our optional 25 page TM3304 Front Constant Velocity Driveshaft Service Manual for 1994-1998 Dodge Ram, or the 26 page TM3317 Front Constant Velocity Driveshaft Service Manual for 1999-2001 Dodge Ram. Both of these excellent printed publications feature color exploded views and over 100 color photographs.

photo

TK3030 Series Torque King® Driveshaft Master Rebuild Kits For 1994-1998 Dodge Ram 1500 4x4 trucks with Detroit 7290 Front U-Joint which uses 4 inside lockup snap rings. Our optional TM3304 color illustrated Service Manual is available separately. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK3035 Torque King® Driveshaft Master Rebuild Kit For 1999 Dodge Ram 1500 4x4 trucks with Front Conversion U-Joint with 2 inside C-Clips & 2 external snap rings. Our optional TM3317 color illustrated Service Manual is available separately. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK3036 Torque King® Driveshaft Master Rebuild Kit For 2000-2001 Dodge Ram 1500 4x4 trucks with all 3 u-joints the same 1330 series external lockup type. Our optional TM3317 color illustrated Service Manual is available separately. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Slip Stubs

top_page
product note

The original equipment Slip Stubs for 1994 to 2001 Dodge Ram 1500 front Double Cardan front CV shafts are no longer in production. If you need a slip stub for driveshaft, we have our special QU40843 16 spline stub that is a bit longer than any of the original stubs so you can just cut the tube to the right length without having to precisely machine through the old weld. You can also use the extra length to lengthen your driveshaft for lift kit applications.

tech note

If you have a 1994 to early 1999 truck with the fine spline slip joint, you will also need to purchase QU40771 Slip Yoke, QU40764 Universal Joint, and QU40132 Boot. For later 1999 to 2002 models with the 1-3/8" original 16 spline or 15 spline based on 16 spline stub you can reuse both the slip yoke and boot if they are in good condition.

photo

QU40843 16 Spline Slip Stub Fits the 2.5" x 0.095" wall thickness tubing used on 1994-2001 Dodge Ram 1500 Double Cardan front CV driveshafts. The length from end of spline to weld point is approximately 19/32" longer than the stubs used on most of the 1994 to 2001 Dodge original equipment front driveshafts. Use with QU40771 or QU40845 Coarse Spline Slip Yokes. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Slip Yokes

top_page
product note

For the 1994-1998 model years, all factory front CV shafts use a 1-9/32" fine spline stub and yoke with a Detroit Universal 7290 u-joint. The slip Joint is shielded by QK3078 Boot. 1999 are goofy years, so goofy that my 1999 and 2000 Dodge Parts books do not even list the front driveshaft parts! You may find some real early 1999 trucks with the 7290 series slip yoke. However, Most 1999 Driveshafts still have the 29 based on 30 fine spline slip stub, but use a Spicer 1330 series slip yoke with a conversion joint that attaches to a 7290 series front pinion yoke. Late production 1999 shafts may have a coarse, 16 spline, 1330 series slip joint with the 1330 x 7290 conversion u-joint. Real early 2000 trucks may still use the conversion joint and/or fine spline slip yoke, but most, if not all will use a 16 spline 1330 slip yoke with a straight 1330 u-joint. Given the age of this era of Dodge trucks, it is not unusual to find non-standard components. A great many of these trucks have had the original slip joint replaced with 1-3/8" diameter 16 spline aftermarket parts.

photo

QU40701 Factory Replacement Slip Yoke For later 1999 Dodge Ram 1500 trucks and early 2000 Dodge Ram 1500 trucks with 29 spline based on 30 spline Slip Stub. Will also fit 1994-early 1999 trucks if you order QU40764 Universal Joint. Made in U.S.A. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40771 Factory Replacement Slip Yoke for later 2000 Dodge Ram1500 trucks to 2001 Dodge Ram 1500 trucks. Fits 16 spline slip stub. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40845 1330 Series Long Reach Slip Yoke Is 7/8" longer than QU40771 so it can NOT be used to directly replace your coarse spline stock slip yoke unless you truck is lifted, but it is a lower cost alternative if you are also replacing your slip stub with QU40843. Vented Yoke includes press on seal. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo

QU11102 Grade 5 Front Driveshaft Bolt With attached washer. Four of these special Bolts are needed to attach the driveshaft to the transfer case output flange. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40763 U-Joint Strap Kit With special small head, hardened bolts for attaching the driveshaft to the front axle pinion yoke on 1994 Dodge Ram 1500, 1996 Dodge Ram 1500, 1997 Dodge Ram 1500, 1998 Dodge Ram 1500 and 1999 Dodge Ram 1500 trucks. Made in U.S.A. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40735 U-Joint Strap Kit With special hardened 1/4" fine thread bolts for attaching the driveshaft to the front axle pinion yoke on 2000 Dodge Ram 1500 and 2001 Dodge Ram 1500 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
product note

Most CV and universal joint service is done using makeshift tools and hammer on the parts until something gives service methods. Driveshaft parts and universal joints are incredibly precise components that can be easily damaged by such slam-bang work. There is a better way to perform driveshaft service using application specific press tooling and approved service procedures. Yeah, I know the Manuals and Tools are expensive, but when you consider that a poorly installed front u-joint blowing out as you tool down the Interstate at 75 is going to cause an expensive and dangerous mess. I have witnessed several driveshaft failures in vehicles driving ahead of me during my travels and I can tell you a 3' long front driveshaft can do a heck of a lot of damage as it whips around jamming into the road, whacking the transmission, and smashing the floor!

photo

QT1065M Long Throat C-Frame Ball Joint Press is designed to accept a variety of interchangeable tooling for performing Ball Joint and Universal Joint service on your 4x4. A standard-duty tool that will get the job done when used with the appropriate tooling for your big Dodge Ram. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT4010 1" Press Tip Is used with a QT1065 series C-frame Press and QT4016 Press Anvil to easily install universal joints with 1-1/16" to 1-3/16" diameter cups on most common light truck driveshafts and 4x4 front axle shafts. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT4016 1-1/16" to 1-3/16" Capacity U-Joint Press Anvil Used with a QT1065 series C-frame Press and either QT4008 Medium U-Joint Separator Yoke or QT4010 1" Press Tip to easily remove and install all three universal joints from any stock type 1994-2002 Dodge Ram front driveshaft. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Universal Joints

top_page
photo

TK40721 Torque King® U-Joint, cold-forged, alloy steel, non-greaseable factory synthetic-lubed, universal joint with four external snap rings for the Constant Velocity Joint. 2 of these joints are used in the CV Joint (upper or transfer case end of shaft) on 1994-2001 Dodge Ram 1500 4x4 trucks. This Joint is also used in the Slip Yoke on 2000-2001 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK40722 Torque King® U-Joint, cold-forged, alloy steel, non-greaseable factory synthetic-lubed front universal joint with four internal c-clips fits the front slip yoke on 1994 Dodge Ram 1500, 1995 Dodge Ram 1500, 1996 Dodge Ram 1500, 1997 Dodge Ram 1500 and 1998 Dodge Ram 1500 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK40804 Torque King® Conversion U-Joint, cold-forged, alloy steel, non-greaseable factory synthetic-lubed front conversion universal joint (slip yoke to axle pinion yoke) for 1999 1500 Dodge Ram trucks (has 2 external snap rings and 2 internal c-clips). More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40764 U-Joint Hot-forged, alloy steel, greaseable front universal joint (slip yoke to axle pinion yoke) for 1999 Dodge Ram 1500 trucks (has 2 external snap rings and 2 internal c-clips). More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40774 U-Joint Hot-forged, alloy steel, greaseable u-joints with nitrile rubber seals for the Constant Velocity Joint. Two of these joints are used in the CV Joint (upper or transfer case end of shaft) on 1994-2001 Dodge Ram 1500 4x4 trucks (four external snap rings). This Joint is also used in the Slip Yoke on 2000-2001 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40775 U-Joint Hot-forged, alloy steel, greaseable front (slip yoke to axle pinion yoke) u-joints for 1994-1998 Dodge Ram 1500 trucks (four internal c-clips). More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Discontinued Tools

top_page
photo

QT4008 Medium Size U-Joint Separator Yoke Is used with a QT1065 series C-frame Press and QT4016 Press Anvil to easily remove the 3 universal joints on 1994 to 2002 Dodge Ram Double-Cardan Constant Velocity front driveshafts and 4x4 front axle shafts. Discontinued.

photo

QT4014 1-1/16" Capacity U-Joint Press Anvil Used with a QT1065 series C-frame Press and either QT4008 Meduim U-Joint Separator Yoke or QT4010 1" Press Tip to easily remove and install the two universal joints from all 1994-2002 Dodge Ram front driveshaft CV Joints and the external snap ring front universal joint on 1999 to 2002 Ram 2500 and Ram 3500. Will not work on the front u-joint on 1994 to 1998 trucks using internal c-clips. Superseded by QT4016.