Parts for AAM 925 14 Bolt Front Axles in 2003-2013.5 Dodge Ram 4x4 Trucks

We stock a wide selection of genuine original equipment and performance parts for the 2003-2013.5 Dodge AAM 925 front axle with 4 Control Arm Type Suspension used in Dodge Ram 2500, Ram 3500 trucks and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle. The 14 Bolt American Axle Manufacturing (AAM) Model 925 Front Beam Axle debuted in the 2003 model year Dodge Ram 2500 and Ram 3500 4x4 trucks. The AAM 925 replaced the Dana-Spicer Model 60 front axle used in the 1994-2002 versions of the big Ram trucks. The differential and gear set are adequate for the stock Cummins Diesel or gasoline engines and rarely pose major problems unless severely abused or neglected. However, the same can not be said for the rest of the axle. Ball Joint failures with this axle are a chronic problem due to the size and design of the steering knuckle. The life expectancy of the original wheel hubs and axle universal joints is fair to good, but does not seem to equal the earlier Dana-Spicer Axles under most conditions.

Axle Complete Hub to Hub Assemblies, Diff Covers, and Housings

top_page
product note

From what I have seen, the riveted axle tubes in AAM 925 front axles are somewhat prone to work loose under extended, rough operating conditions. Loosened or sheared rivets are also pretty common when the front axle is subjected to a bad hit. As a consequence, finding a really good used axle housing from a wrecking yard can be tough. Whenever we get one, we will list it here.

photo

QK8015 Dodge Ram AAM 925 Front Axle Differential Cover Kit Replace that unsightly rusty or dented front diff cover on your big Ram with our Diff Cover Kit that includes genuine American Axle Manufacturing front diff cover pan, reuseable differential cover gasket, fill plug, and 14 differential cover bolts. Fits all 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.
 
More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11103 Differential Cover Bolts for Dodge Ram AAM 925 Front Axle Are genuine original equipment American Axle Manufacturing replacement Diff Cover Bolts with factory applied Threadlocker. QU11103 fits all 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks with the AA 9-1/4" 14 bolt front beam type drive axle. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11117 Dodge Ram AAM 925 Front Axle Differential Cover Dodge Ram AAM 925 Front Axle Differential Cover Steel front diff "pumpkin" cover pan is a genuine AAM original equipment part for all 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks with the American Axle Manufacturing AAM 9-1/4"14 bolt front beam type drive axle. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Order QK8015 above.

Axle Shafts

top_page
product note

Depending upon the year, several different front axle shaft configurations are found for the Dodge AAM 925 front beam axle used on 2003 and newer Dodge Ram 2500 and Ram 3500 4x4 trucks. The good news is for a given year, there is only one axle shaft part number for each side regardless if the truck has single or dual rear wheels. The biggest change was the use of a larger axle universal joint for 2010 and newer axles. We stock both complete axle shaft assemblies and individual inner and outer axle shafts.

photo

QU11192 2010-12 Left Axle Shaft Assembly Is a genuine American Axle, factory assembled, original equipment left axle shaft assembly for AAM 925 Front Drive Axles in 2010-12 model year Ram 2500 and Ram 3500 4x4 trucks. Includes Outer Axle Shaft, Outer Axle U-Joint, and Left Inner Axle Shaft.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11193 2010-2012 Right Axle Shaft Assembly Is a genuine American Axle, factory assembled, original equipment left axle shaft assembly for AAM 925 Front Drive Axles in 2010-2012 model year Ram 2500 and Ram 3500 4x4 trucks. Includes Outer Axle Shaft, Axle U-Joint, and Right Inner Axle Shaft.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11190 2009 Left Axle Shaft Assembly Is a genuine American Axle, factory assembled, original equipment left axle shaft assembly for AAM 925 Front Drive Axles in 2009 model year Ram 2500 and Ram 3500 4x4 trucks. Includes Outer Axle Shaft, Axle U-Joint, and Left Inner Axle Shaft.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11191 2009 Right Axle Shaft Assembly Is a genuine American Axle, factory assembled, original equipment left axle shaft assembly for AAM 925 Front Drive Axles in 2009 model year Ram 2500 and Ram 3500 4x4 trucks. Includes Outer Axle Shaft, Axle U-Joint, and Right Inner Axle Shaft.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10954 2003-2008 Left Axle Shaft Assembly Is a genuine American Axle, factory assembled, original equipment left axle shaft assembly for AAM 925 Front Drive Axles in 2003-2008 model year Ram 2500 and Ram 3500 4x4 trucks. Includes Outer Axle Shaft, Outer Axle Shaft Slinger, Axle U-Joint, and Left Inner Axle Shaft.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11109 2003-2008 Right Axle Shaft Assembly Is a genuine American Axle, factory assembled, original equipment right axle shaft assembly for AAM 925 Front Drive Axles in 2003-2008 model year Ram 2500 and Ram 3500 4x4 trucks. Includes Outer Axle Shaft, Outer Axle Shaft Slinger, Axle U-Joint, and Right Inner Axle Shaft.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50821 2003-2009 Left Inner Axle Shaft Is a genuine American Axle original equipment left inner axle shaft for AAM 925 Front Drive Axles in 2003-2009 model year Ram 2500 and Ram 3500 4x4 trucks, plus 2004-2009 Ram 1500 Mega Cab 4x4s. Please Note: this part undergoes periodic supply shortages. The cart link will not work when QU50821 is on indefinite factory back order.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50822 2003-2009 Right Inner Axle Shaft Is a genuine American Axle original equipment right inner axle shaft for AAM 925 Front Drive Axles in 2003-2009 model year Ram 2500 and Ram 3500 4x4 trucks, plus 2004-2009 Ram 1500 Mega Cab 4x4s. Please Note: this part undergoes periodic supply shortages. The cart link will not work when QU50822 is on indefinite factory back order.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50825 2010-2012 AAM Outer Shaft For Dodge 9.25 front axle shaft for Dodge AAM front axles is a genuine AAM replacement outer axle shaft for 2010-2012 Ram 2500, Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50823 2010-2012 AAM Left Inner Shaft For Dodge 9.25 front axle shaft for Dodge AAM front axles is a genuine AAM replacement left inner axle shaft for 2010-2012 Ram 2500, Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50824 2010-2012 AAM Right Inner Shaft For Dodge 9.25 front axle shaft for Dodge AAM front axles is a genuine AAM replacement right inner axle shaft for 2010-2012 Ram 2500, Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4732 4x4 Front Axle Shaft Nut Kit For 2003-up Dodge Ram full size 4x4 trucks with AAM beam type front axles. Kit includes two each original equipment nuts and washers plus new cotter keys. Fits Dodge AAM 925 14 Bolt front axles which are found on all 2003-on Dodge Ram 2500 and 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info 

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shaft Seals and Axle Shaft Seal Kits

top_page
product note

The Axle Shaft Oil Seals in your Dodge AAM925 front axle are of composite construction combining a steel shell with a plastic axle shaft guide. The axle Shaft Seals are located right next to the differential bearing adjusters so complete axle disassembly is required to replace them. Trying to install these seals using makeshift tools usually results in a wrecked seal and boogered up differential adjuster threads. Our Installation Tool Kits TS4685 and QK4685 make short work of installing your new seals without damaging either the seal or axle housing.

photo

QU10945 Front Inner Axle Shaft Oil Seal For Dodge AAM 925 14 Bolt front axles which are found on all 2003-on Dodge Ram 2500 and 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. These high-quality, oil-bath type Seals are genuine AAM parts.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4685 Front Inner Axle Seal and Installation Tool Kit For the AAM 925 14 Bolt Front Drive Axle installs the Inner Axle Seals on all 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Kit includes QT1143 Seal Installer, QT1193 Thrust Plate, QT1195 Press Screw Assembly, and (2) QU10945 Seals. Specifically made to easily install QU10945 Genuine AAM Axle Seals without damaging the rather delicate seals or your Axle Adjuster Threads which are machined in the housing.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4879 Front Inner Axle Shaft Oil Seal Kit For Dodge AAM 925 14 Bolt front axles which are found on all 2003-on Dodge Ram 2500 and 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Kit includes 2 QU10945 OEM oil-bath type Seals and 8 QU10861 OEM Hub to Knuckle Bolts.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Universal Joints

top_page
product note

The AAM Front Drive Axle used on 2003-2009 Dodge Ram 2500 and 3500 4x4 trucks uses axle u-joints that have a unique lock-up dimension. However, even though the u-joints are very similar in overall size to those used on the Dana axles previously used by Dodge, the u-joints are not interchangeable which has led to some real problems from trying to force u-joints made for Dana axles into AAM axle shafts due to gross catalog application errors by almost all aftermarket u-joint suppliers. Our AAM and Torque King® axle shaft universal joints are made to fit your Dodge AAM 925 axle shaft yokes. 2010 and newer axles use a larger axle universal joint.

photo

QU40765 2003-2009 Genuine AAM Factory-Lubed Axle U-joints For 2003-2009 Ram 2500, Ram 3500. Also fits 2004-2009 Ram 1500 Mega Cab with the solid beam 4x4 front axle. These newly released, genuine AAM Universal Joints features double lip seals with an outer wiper, and a different lubricant for longer life.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK40444 2003-2009 Torque King® Non-Greaseable Axle U-Joints for 2003-2009 Dodge Ram 2500 and Ram 3500 Ultra-strong Universal Joints feature super-thick cold-forged cross with thick-wall journals for maximum strength, plus the triple lip cup seals are the ultimate for keeping grease in and water or other contaminants out. Also fits 2004-2009 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK40446 2003-2009 Torque King® Greaseable Axle U-Joints for 2003-2009 Ram 2500 and Ram 3500 Is an easy to grease, ultra-strong Universal Joint that features super-thick a cold-forged cross with thick-wall journals for maximum strength, plus the triple lip cup seals are the ultimate for keeping grease in and water or other contaminants out. Also fits 2004-2009 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK50253 2010-up Genuine AAM Factory Lubed U-Joint Fits all 2010 and newer Ram 2500, Ram 3500 4x4 front axle shafts. QU50253 is a dual fit, factory lubed u-joint that fits BOTH AAM 925 front axle shafts in the 2500/3500 series trucks and the rear driveshafts in 2007-up Ram 3500, Ram 4500, and Ram 5500 with AAM 1555 series rear driveshafts. Includes both inside lockup c-clips for axle applications and external snap rings for driveshafts.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11173 2010-up Greaseable Axle U-Joint Fits all 2010 and newer Ram 2500, Ram 3500 4x4 front axle shafts.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11262 2003-2009 Axle U-Joint Kit for Dodge Ram 2500, Ram 3500 4x4 trucks for front axle shafts. Includes 2 each genuine AAM axle u-joint, axle shaft nut, axle shaft washer, cotter key, and 8 hub to knuckle bolts.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11263 2010-up Axle U-Joint Kit for Ram 2500, Ram 3500 4x4 trucks for front axle shafts. Includes 2 each genuine AAM axle u-joint, axle shaft nut, axle shaft washer, cotter key, and 8 hub to knuckle bolts.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joints, OEM and Greaseable Stock Replacement

top_page
product note

Need Ball Joints for an AAM 925 Front Axle in your 2003 to 2010 Dodge Ram 1500 Mega Cab, 2003-2013.5 Ram 2500, or 2003-2013.5 Ram 3500 4x4 truck? Replace those worn ball joints on your Heavy Duty Dodge Truck yourself! Each kit includes your choice of 4 Ball Joints with ball joint hardware, new locking nuts for the tie rod ends, cotter keys for the axle shaft nuts, Threadlocker, anti-seize, and synthetic brake caliper lube. (Individual Ball Joints and parts sold in the next section.) Need Tech Help? Order optional TSB4586, 6 page, step-by-step full color printed instructions with 22 color photos.
*See Tech Page About Ball Joint Failures

photo

QK4586 Original Equipment AAM Ball Joint Kit For Dodge AAM 925 Front Axle in 2003-2012 Ram 2500 and Ram 3500 4x4 trucks. Also fits 2004-2009 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Each kit includes 2 Upper and 2 Lower genuine Original Equipment AAM Non-Greaseable replacement ball joints with hardware, PLUS new locking nuts for the tie rod ends, cotter keys for the axle shaft nuts, Threadlocker, anti-seize, and synthetic brake caliper lube.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4850 Greaseable Ball Joint Kit For Dodge AAM 925 Front Axle in 2003-2012 Dodge Ram 2500 and 3500 4x4 trucks. Also fits 2004-2009 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Each kit includes 4 GREASEABLE (2 Upper, 2 Lower) Ball Joints with hardware for moisture laden applications like snow plowing. Includes new Locking Nuts for the tie rod ends, Cotter Keys for the axle shaft nuts, Threadlocker, Anti-seize, and Synthetic Brake Caliper Lube. Assembled in U.S.A. of domestic and imported components.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50781 OEM Dodge AAM Ball Joint Kit for 1 Side is for 2003-2012 4x4 Dodge AAM 925 Front Axle Ram 2500, Ram 3500 trucks 4x4 trucks and 2004-2010 Dodge Ram 1500 Megacab trucks with the solid beam 4x4 front axle. This Set includes 1 Upper and 1 Lower genuine Original Equipment AAM Non-Greaseable replacement ball joints with hardware. AAM Original Equipment Ball Joint Components Made in U.S.A. or Mexico.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joints, Performance Greaseable form Carli and Dynatrac

top_page
product note

The Torque King® lineup now includes greaseable Carli Extreme Duty and Dynatrac Heavy-Duty BallJoints™ for 2003-2013.5 Dodge Ram American Axle AA 9-1/4" front axles! These high-performance ball  joints are the strongest, most durable and highest quality Ball Joints available anywhere! with features heat-treated high-strength billet bodies with chromoly stems. 

Make your Big Ram 4x4 truck last! Order your Set now!

photo

TK11266 Carli Extreme Duty Ball Joints Set for 2003-2012 Dodge Ram 2500, Ram 3500 and 2004-2010 Dodge Ram 1500 Megacab with AAM 9-1/4" front axle. Carli Ball Joints are rated for extreme duty, carry a lifetime warranty, and are fully greaseable. Carli ball joints start out as a chunk of specialty chosen material which is machined to their unique design and then heat treated to a specified rockwell (hardness). From there the ball joints head to an aero-space lube company where a proprietary dry-lube coating is applied to our specified thickness. Each Carli Ball Joiny has an accessible grease zerk fitting for easy servicing. TK11266 includes 4 Extreme Duty Ball Joints and a tube of high quality Red Line CV-2synthetic grease. Lifetime Warranty from Carli.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK42058 Dynatrac Heavy-Duty Rebuildable BallJoints™ for 2003-2012 Dodge Ram AAM 9-1/4" Front Axles feature heat-treated high-strength billet bodies with chromoly stems. Manufactured for us in USA by Dynatrac, the heat-treated, precision-ground stainless steel ball meets military specifications, a unique seal prevents contamination, plus the ball joints have greaseable fittings and Teflon-coated wear points to provide a long, durable life. Better yet, Torque King® Dynatrac Ball Joints are rebuildable -- they can be rebuilt on the vehicle with common hand tools! Installation procedures are the same as factory Ball Joints.14 Bolt Solid Beam Type Front Drive Axles includes 4 American Made Rebuildable Ball Joints with ball joint hardware and installation instructions.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK42060 Ball Joint Rebuild Kit for TK42058 Ball Joints in 2003-2012 Dodge 2500, 3500 4x4's.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joints, Replacement Individual Ball Joint and Ball Joint Parts

top_page
product note

Need Ball Joints for an AAM 925 Front Axle in your 2003 to 2012 Dodge Ram 1500 Mega Cab, Ram 2500, or Ram 3500 4x4 truck? Replace those worn ball joints on your Heavy Duty Dodge Truck yourself! Need Tech Help? Order optional TSB4586, 6 page, step-by-step full color printed instructions with 22 color photos.
*See Tech Page About Ball Joint Failures

photo

QU50111 Genuine AAM Original Equipment Lower Ball Joint, non-greaseable. (Ball Joint only; Order QU50112 Seal QU50110 Nut, and QU50109 Retaining Ring separately.) Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50112 Genuine AAM Original Equipment Lower Ball Joint Seal For QU50111. Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Discontinued.

photo

QU50110 Genuine AAM Original Equipment Lower Ball Joint Nut For QU50111. Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Discontinued.

photo

QU50109 Genuine AAM Original Equipment Retaining Ring For Lower Ball Joint QU50111. Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Discontinued.

photo

QU50108 Genuine AAM Original Equipment Upper Ball Joint , non-greaseable. Includes Ball Joint with ball joint seal, order QU50107 Nut separately. Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle. Discontinued.

photo

QU50107 Genuine AAM Original Equipment Upper Ball Joint Nut For QU50108. Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50217 Greaseable Lower Ball Joint for Dodge Ram AAM 925 Front Axle, greaseable. Also includes Ball Joint Seal, Nut, Retaining Ring, Grease Fitting, and Grease Plug. Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50218 Greaseable Upper Ball Joint for Dodge Ram AAM 9250 Front Axle, greaseable. Also includes Ball Joint Seal, Nut, and Grease Fitting. Fits all 2003-2012 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Brake Parts

top_page
product note

All 2003 and newer Dodge Ram 2500 and Ram 3500 trucks with AAM 925 14 Bolt 4x4 front axles are equipped with front anti-lock disc brakes.

photo

QU10878 Caliper Anchor Plate-to-Steering Knuckle Bolt For all 2003-2008 Dodge Ram 2500 and Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11065 2003-2008 Right Front Disc Brake Rotor Shield For 2003-2008 Dodge Ram 2500 and Ram 3500 4x4 Trucks.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11066 2003-2008 Left Front Disc Brake Rotor Shield For 2003-2008 Dodge Ram 2500 and Ram 3500 4x4 Trucks.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11063 2009-2012 Left Front Disc Brake Rotor Shield For 2009-2012 Dodge Ram 2500 and Ram 3500 4x4 Trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11064 2009-2012 Right Front Disc Brake Rotor Shield For 2009-2012 Dodge Ram 2500 and Ram 3500 4x4 Trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings, Individual Timken® Brand

top_page
product note

If you only need a bearing or two for your 2003-2012 Dodge AA 9-1/4" front axle, we stock the best: Timken®. For the amount of work it takes to change most axle bearings, the extra cost for a Timken® diff or pinion bearing is a small price to pay for better steel, more uniform surface finish, and accurate, precision ground races.

photo

QU50539 Timken® Outer Pinion Bearing Cup For 2003-on 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 with the solid beam 4x4 front axle.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50540 Timken® Outer Pinion Bearing For 2003-on 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 with the solid beam 4x4 front axle.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU12017 Timken® Inner Pinion Bearing Cup For 2003-on 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50548 Timken® Inner Pinion Bearing For 2003-on 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50546 Timken® Differential Bearing Cup For 2003-on 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 with the solid beam 4x4 front axle. (Requires 2)

More Info

 

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50547 Timken® Differential Bearing For 2003-on 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 with the solid beam 4x4 front axle. (Requires 2)

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearing Kits

top_page
product note

Dodge AAM 9-1/4" axles do not have lock out hubs so all front axle components are constantly rotating as you drive. A front axle rebearing job is a preventive maintenance service that should usually be performed on Dodge Ram trucks with 150,000 to 200,000 miles on the odometer to prevent catastrophic bearing related failures. Our Differential Bearing and Seal Kits include Timken® Differential and Pinion Bearings plus genuine original equipment American Axle Manufacturing (AAM) small parts needed to perform that all important front axle rebearing service.

photo

TK4880 Torque King® Master Dodge AAM 925 Front Differential Bearing and Seal Kit Includes original equipment Timken® Bearings and these genuine AAM service parts: Pinion Seal, Pinion Seal Wear Sleeve, Pinion Nut, Pinion Washer, Diff Cover Gasket, Inner Axle Seals, and Crush Sleeve. Kit also includes Gear Marking Compound and Threadlocker.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK8018 Dodge AAM 925 Front Differential Bearing Kit Includes original equipment Timken® Bearings and these genuine AAM service parts: Pinion Nut, Pinion Washer, and Crush Sleeve. Order QU10865 Pinion Seal separately.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK8013 Dodge AAM 925 Front Differential Installation Kit Is a genuine original equipment small parts kit for all 2003 and up Dodge trucks equipped with the AAM 925 9.25" Ring Gear Front Axles. This nifty kit has all those little hard to find parts needed to do a professional level service job. QK8013 includes Axle Shaft Seals, Axle Shaft Nuts, Shims, Bolts, Pinion Seal, Pinion Wear Sleeve, Gaskets, Crush Sleeve, Pinion Washer, Pinion Nut, & Fill Plug.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Parts

top_page
product note

Most 2003 and newer Dodge Ram 4x4 trucks with the American Axle 9-1/4" ring gear beam front axle will have an open differential. An electric locking differential was available on models with 4.56 axle ratios such as the Ram 2500 Power Wagon®. There are two versions of open differentials which are not interchangeable between years. The 1st design open differential fits 2003 to 2006 model years. 2nd design differentials fit 2007 and later axles.

photo

QU11059 Pinion Shaft Lock Screw for Dodge Ram AAM 925 Front Axles Is a genuine original equipment American Axle Manufacturing differential Cross Shaft Lock Screw that holds your Pinion or Cross Shaft in your front axle's open differential case.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK8013 Dodge AAM 925 Front Differential Installation Kit Is a genuine original equipment small parts kit for all 2003 and up Dodge trucks equipped with the AAM 925 9.25" Ring Gear Front Axles. This nifty kit has all those little hard to find parts needed to do a professional level service job. QK8013 includes Axle Shaft Seals, Axle Shaft Nuts, Shims, Bolts, Pinion Seal, Pinion Wear Sleeve, Gaskets, Crush Sleeve, Pinion Washer, Pinion Nut, & Fill Plug.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50248 2003-2006 Internal Differential Parts Kit for Dodge Ram AAM 925 Front Axles Gets you back on the road if you break the "Spider Gears" in your 2003-2006 Dodge Ram 4x4 truck with the AAM 9-1/4" ring gear front drive axle. QU50248 includes all the genuine original equipment American Axle Manufacturing differential parts located inside your front axle's open differential case.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4882 2007-up Internal Differential Parts Kit for Dodge Ram AAM 925 Front Axles Gets you back on the road if you break the "Spider Gears" in your 2007 or newer Dodge Ram 4x4 truck with the AAM 9-1/4" ring gear front drive axle. QK4882 includes all the genuine original equipment American Axle Manufacturing differential parts located inside your front axle's open differential case.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50814 2003-2006 Loaded Differential Case Assembly for Dodge Ram AAM 925 Front Axles Is a complete, factory assembled differential case to get you back on the road when you blow up the front differential on your 2003-2006 Dodge Ram 4x4 truck with the AAM 9-1/4" ring gear front drive axle.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50729 2007-up Loaded Differential Case Assembly for Dodge Ram AAM 925 Front Axles Is a complete, factory assembled differential case to get you back on the road when you blow up the front differential on your 2007 or newer Dodge Ram 4x4 truck with the AAM 9-1/4" ring gear front drive axle.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50862U 2003-2006 Used Bare Differential Case for Dodge Ram AAM 925 Front Axles Is a good used bare differential case for your 2003-2006 Dodge Ram 4x4 truck with the AAM 9-1/4" ring gear front drive axle.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11108 Ring Gear Bolt for 2003-up Dodge AAM 925 Front Axles Is a genuine, original equipment American Axle Manufacturing left hand thread Ring Gear Bolt with factory applied threadlocking compound for all AAM 925 front drive axles in all 4x4 Dodge Ram 2500, Ram 3500, and 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50827U Differential Adjuster Nut For Dodge 9.25AAM front axles.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets

top_page
product note

Only one Gasket is used on 2003 and newer Dodge Ram American Axle 9-1/4" front axles and that is the reusable Differential Cover Pan Gasket.

photo

QU10965 Reusable Differential Cover Gasket Is a genuine AAM part for all for 2003 and newer Dodge Ram 2500 and Ram 3500 4x4 trucks with the AAM 925 front drive axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hub Assemblies, Stock

top_page
product note

The front wheel bearings on 2003-up Dodge 4x4 3/4 and 1 ton trucks with AAM 9-1/4" front axles are of unitized construction. They are not serviceable and no replacement bearings or seals are available for them. Single Rear Wheel (SRW) and Dual Rear Wheel (DRW) trucks use the same hub in a given MODEL year, but Dodge has changed the Hub design every three years. If your front wheel bearings are noisy or loose, you need to replace the hub and bearing assembly with one of these OEM quality hub assemblies.

photo

QU10890 2003-2005 Dodge Ram 2500, Ram 3500 Front Wheel Hub Kit Is an original equipment manufacturer 8 bolt front hub assembly complete with ABS sensor and cable. QU10890 fits all 2003, 2004, and 2005 Dodge Ram 2500 and Ram 3500 4x4 Trucks with either single or dual rear wheels.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50417 2006-2008 Dodge Ram 2500, Ram 3500 Front Wheel Hub Kit Is an original equipment manufacturer 8 bolt front hub assembly complete with ABS sensor and cable. QU10890 fits all 2006, 2007, and 2008 Dodge Ram 2500 and Ram 3500 4x4 Trucks with either single or dual rear wheels.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU11314 2009-2011 Dodge Ram 2500, Ram 3500 Front Wheel Hub Kit Is an original equipment manufacturer 8 bolt front hub assembly complete with ABS sensor and cable. QU10314 fits all 2009, 2010, and 2011 Dodge Ram 2500 and Ram 3500 4x4 Trucks with either single or dual rear wheels.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU11315 2012-2013.5 Ram 2500, Ram 3500 Front Wheel Hub Kit Is an original equipment manufacturer 8 bolt front hub assembly complete with ABS sensor and cable. QU10315 fits all 2012 Ram 2500 and Ram 3500 4x4 Trucks with either single or dual rear wheels. For 2013, QU11315 fits Ram 2500, Ram 3500 trucks built thru May 27, 2013 with the 4 trailing Arm type front suspension.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10861 Hub-to-Steering Knuckle Bolt For 2003 and newer Dodge Ram 2500 and Ram 3500 4x4 trucks.

More Info 

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hub Kits, Performance Rebuildable by Dynatrac and Yukon

top_page
product note

Replace those troublesome and expensive factory unit hubs. Upgrade your big Ram 4x4 to have rebuildable Front Wheel Hubs with replaceable Timken® Tapered Wheel Bearings, and Fuel Saving Lock Out Hubs. We stock Dynatrac Free-Spin™ and Yukon Spin Free® performance Serviceable Front Hub Kits for your Ram. For Single Rear Wheel (SRW) Ram 2500, Ram 3500, kits are available with your choice of Dynaloc™, Mile Marker®, Warn®, or Yukon® Lockout Hubs. Have a Ram 3500 dually? Check out our Yukon Spin Free® Kits with direct-fit wheel hubs that eliminate the need for a separate wheel adapter. Want the ultimate Kit that has it all in one package? See Our Torque King Master Kits featuring a USA made Dynatrac Free-Spin™ Kit, 3 Hub Lock choices, premium Axle U-joints, Install Tools, and more!
Benefits of These Kits include:
Better Fuel Mileage
Reduced Wear and Tear on the front axle gears, front driveshaft, and transfer case
Easy to service and/or replace the popular, readily available, economical tapered front wheel bearings
Allow operation in 4x2 low range when hubs are unlocked for backing up trailers or other low speed maneuvering

photo

TK4900 Series Torque King® Master Front Serviceable Wheel Hub and Lockout Hub Kits with Dynatrac Free-Spin™ Kit, Axle U-Joints and Install Tools for 2003-2013.5 Dodge Ram 2500, Ram 3500 trucks with single rear wheels. TK4900 Series Kits include all the parts, special assembly tools, and extras needed to upgrade your heavy-duty Ram 4x4's front axle to low-cost serviceable wheel bearings and your choice of fuel-saving lockout hubs. The heart of all these comprehensive Kits are USA made Dynatrac Front Free-Spin™ Hub Kit PLUS, our comprehensive Master Kits ALSO include Spindle Nut Socket, Torque King® Factory Lubed Axle U-Joints, wheel seal tools, bearing packer, synthetic wheel bearing grease, threadlocker, and anti-seize compound. Kits direct fit single rear wheel trucks. Will also fit dually models with optional wheel adapters, see More Info Tech Notes if you have a Dodge Ram 3500 with Dual Rear Wheels (DRW).

More Info: 2003-2008, 2009, 2010-20112012-2013.5

 

photo

TK11200 Series Dynatrac Free-Spin™ Kits for 2003-2013.5 Dodge Ram 2500, Ram 3500 TK11200 Series Kits include the conversion parts and your choice of fuel-saving lockout hubs to upgrade your heavy-duty Ram 4x4's front axle. Each Kit includes a complete, USA made Dynatrac Front Free-Spin™ Hub Kit with heat-treated chromoly spindles, spindle bearings, spindle seals, Timken® wheel bearings, Timken® or Dana wheel seals, 35-spline 1.50-inch chromoly outer shafts, 8 bolt wheel hubs, your choice of Hub Locks, double spindle nut kit, and instructions. All Kits direct fit single rear wheel trucks. Will also fit dually models with optional wheel adapters, see More Info Tech Notes if you have a Dodge Ram 3500 with Dual Rear Wheels (DRW).

More Info: 2003-2008, 2009, 2010-20112012-2013.5

photo

Y100010 Series Yukon Spin Free® Front Locking Hub Conversion Kits for 2003-2013.5 Dodge Ram 2500, Ram 3500 Single Rear Wheel 4x4s Y100010 Series Kits fit 2003-2013.5 Dodge AAM front axles in Ram 2500, Ram 3500 4x4 with single rear wheels. The Yukon worry free, Spin Free® Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, low-profile Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. 

More Info:  2003-2008, 2009, 2010-20112012-2013.5

photo

Y100000 Series Yukon Spin Free® Front Locking Hub Conversion Kits for 2003-2013.5 Dodge Ram 3500 Dual Rear Wheel 4x4s Y100000 Series Kits fit 2003-2013.5 Dodge AAM front axles in Ram Ram 3500 4x4 with dual rear wheels. The Yukon worry free, Spin Free® Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs with integral wheel adpaters, spindles, high strength Yukon 4340 Chrome-Moly outer axles, low-profile Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. 

More Info: 2003-2008, 2009, 2010-20112012-2013.5

Manuals and Technical Bulletins

top_page
product note

Dan the Gear Man® Product Note: Knowing how to do the job right the first time is half the battle. With our detailed, easy to read, and well illustrated technical publications, you get accurate service procedures, torque specifications, and tool recommendations.

photo

TSB4586 2003-2011 4x4 Dodge Ram 2500 and Ram 3500 Ball Joint Service (9.25" AAM Axle) Is a color illustrated, 7 page, job specific, mini-manual written by Dan the Gear Man® that explains in photos and step-by-step text the service procedures you will use to replace the pressed in Ball Joints on the American Axle Manufacturing AAM 9.25 front drive axle in your 2003 or newer Dodge Ram 2500 or Ram 3500 4x4 truck. Includes tool recomendations and torque specs.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TSB4597 2003-2011 Dodge Truck AAM 9.25 Front Axle Shaft Service Explains in text and photos how to Replace the Axle Universal Joints on your 2003-2011 Dodge Ram 2500 or Ram 3500 4x4 truck in 4 pages and 14 Color Photographs. TSB4597 includes detailed Axle shaft removal/reinstallation steps, axle u-joint replacement procedures, tool recommendations, and and torque specifications that you need to correctly perform axle shaft and u-joint service on your 2003-2011 Dodge Ram 2500 or Ram 3500 4x4 truck with the AAM 9.25 front drive axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous Parts

top_page
photo

S24200 Blue Threadlocker For hub, caliper anchor, and ring gear bolts etc. Also see catalog page for small packet of blue threadlocker option.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90008 Gear Marking Compound Use with QT9404 Brush to check your ring and pinion gear tooth pattern.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

S9975 Anti-Seize Lubricant Use between the hub and knuckle mating surfaces to prevent rust bonding. Also see catalog page for a 1 ounce tube of Anti-Seize option.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90018 Pyroplex® Protection ES Synthetic Grease Provides extended service protection for your outer axle shaft splines and greaseable aftermarket steering linkage parts.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

S9980 Dielectric Grease Use in the ABS Brake Wire Connectors.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Flanges and Pinion Seals

top_page
product note

Dodge Ram AAM 9-1/4" front axles use the same pinion seal and related parts for all years and models. One somewhat unusual feature is the use of a pressed on wear sleeve on the pinion flange hub. If the wear sleeve gets grooved by the seal, you can just replace the sleeve which is a big $$ saver over having to replace the whole cast iron flange due to a worn seal surface.

photo

QU10865 Pinion Seal for Dodge Ram American Axle 9-1/4" Front Axle Is a genuine original equipment AAM Pinion Seal for all 2003-on 4x4 Dodge Ram 2500, Ram 3500 trucks, and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11106 Pinion Wear Sleeve for Dodge Ram American Axle 9-1/4" Front Axle Is a genuine original equipment AAM Pinion Seal Wear Sleeve for all 2003-on 4x4 Dodge Ram 2500, Ram 3500 trucks, and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4883 Pinion Seal and Wear Sleeve Kit for Dodge Ram American Axle 9-1/4" Front Axle Genuine original equipment AAM Pinion Seal, Pinion Seal Wear Sleeve, Pinion Nut, Pinion Washer, and Pinion Wear Sleeve for all 2003-on 4x4 Dodge Ram 2500, Ram 3500 trucks, and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50727 Dodge Ram American Axle 9-1/4" Front Axle Pinion Companion Flange Yoke is a cast iron pinion companion flange with a serrated face to which your front driveshaft flange yoke bolts to. QU50727 fits all 2003-on 4x4 Dodge Ram 2500, Ram 3500 trucks, and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle. Also available while supply lasts is QU50727U Good Used Pinion Companion Flange Yoke.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11028 Dodge Ram Original Equipment Internal Torx® Type Front Bolts Are genuine original equipment parts with pre-applied threadlocking compound. These Bolts are used to fasten your front driveshaft to the Front Axle Pinion Flange. Requires 4 per driveshaft. Use with T40 Torx® Bit.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU70008 Front Flange Bolt for 2003-up Dodge Ram For bolting the front flange yoke to your front axle's companion flange. Hardened, Class 10.9 Hex Head Bolt is much easier to remove and install since you can use either a thin wall socket or box end wrench instead of the little Torx® bit required for the OEM QU11028 Bolts sold above. Requires 4 per driveshaft.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ring and Pinion Sets

top_page
product note

AAM changed the differential after the 2006 model year. 2003-2006 gear sets are not interchangeable with those found in 2007 or later axles. AAM is no longer producing the early production gear sets, but you can use a 2007-up gear set in your 2003-2006 axle if you ALSO replace your old differential with the 2007-up diff. We do have the later gear sets available from the AAM in 3-7 days depending upon the ratio. Available ratios are 3.42, 3.73, 4.10, and 4.56.

photo

QU50848U Used 2003-2006 3.73 Ratio AAM 9.25" Ring & Pinion Gear Set For 2003-2006 Dodge Ram with 14 bolt front axles. A good used American Axle Manufacturing original equipment matched Gear Set that will fit all AAM 9.25" 14 Bolt front axles in 2003-2006 Dodge trucks.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50878/QU50886/QU50887/QU50888 New AAM Ring & Pinion Gear Sets For 2003 and newer Dodge Ram 4x4s with AAM 9-1/4" beam front axles in Ram 1500 Mega Cab, Ram 2500, and Ram 3500 are genuine AAM original equipment gear sets. Available in 3.42, 3.73, 4.10, and 4.56 ratios.

More Info

Small Parts

top_page
product note

Sometimes, you just need one or two small parts to get back on the road. Between the small parts listed in this section and many others listed under part specific headings elsewhere on the page, we probably have that pesky little part you have to have but just can't find anywhere else.

photo

QU10863 AAM 925 Pinion Nut is a genuine AAM original equipment lock nut for all 2003-on 4x4 Dodge Ram 2500, Ram 3500 trucks, and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10862 AAM 925 Collapsible Pinion Preload Spacer (Crush Sleeve) For all 2003-on 4x4 Dodge Ram 2500, Ram 3500 trucks, and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle. QU10862 is a genuine original equipment AAM part. These Pinion Preload Spacers are installed between the pinion stem and outer pinion bearing.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10864 Front Axle Pinion Washer is a genuine AAM original equipment part that fits between QU10863 Pinion Nut and the Pinion Flange on all 2003-on 4x4 Dodge Ram 2500, Ram 3500 trucks, and 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11107 2003-up Dodge AAM 925 Front Axle Pinion Depth Shim Kit Includes 18 genuine original equipment American Axle Manufacturing pinion depth shims for AAM 9-1/4" ring gear beam type front drive axles in 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks, plus 2004-2010 Ram 1500 Mega Cabs with beam front axles.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11104 Differential Cover Fill Plug for Dodge Ram AAM Front 9-1/4" Axles Is a genuine original equipment American Axle Manufacturing replacement magnetic Diff Cover plug with plastic ring gasket for 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks, plus 2004-2010 Ram 1500 Mega Cabs with beam front axles.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11103 Differential Cover Bolts for Dodge Ram AAM 925 Front Axle Are genuine original equipment American Axle Manufacturing replacement Diff Cover Bolts with factory applied Threadlocker. QU11103 fits all 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks with the AA 9-1/4" 14 bolt front beam type drive axle. Also fits 2004-2010 Ram 1500 Mega Cab with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Steering Knuckles

top_page
product note

Steering Knuckles are considered a non-wear part and rarely need to be replaced unless the vehicle is subjected to a severe front end hit or the ball joint or tie rod nuts are improperly tightened.

photo

QU50722 2003-2008 Right Steering Knuckle for Dodge Ram 2500, Ram 3500 AAM 925 Front Axle Is a genuine original equipment American Axle Manufacturing cast iron right steering knuckle for AAM 9-1/4" ring gear beam type front drive axles in 2003-2008 Dodge Ram 2500 and Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50826 2003-2008 Left Steering Knuckle for Dodge Ram 2500, Ram 3500 AAM 925 Front Axle Is a genuine original equipment American Axle Manufacturing cast iron left steering knuckle for AAM 9-1/4" ring gear beam type front drive axles in 2003-2008 Dodge Ram 2500 and Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11261 2010-2012 Right Steering Knuckle for Ram 2500, Ram 3500 4x4 trucks. This is a genuine AAM replacement part.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11260 2010-2012 Left Steering Knuckle for Ram 2500, Ram 3500 4x4 trucks. This is a genuine AAM replacement part.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Steering Tie Rod Parts

top_page
product note

At this time we do not stock the tie rod or drag link, but we do stock the non-reusable Lock Nut for the factory steering linkage.

photo

QU10602 Lock Nut for Ties Rod and Drag Links Is a genuine original equipment nut that is an essential part to replace any time you disconnect a tie rod or drag link end on your 2003-on 4x4 Dodge Ram 2500, Ram 3500 truck. Also fits 2004-2010 Ram 1500 Mega Cab models with the solid beam 4x4 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
product note

Having the right tool for the job makes the work easier and faster, plus the correct tool will usually minimize the chances of wrecking parts. We offer many special tools made specifically for the American Axle Manufacturing 9-1/4" Ring Gear front axle in your 2003 or newer big Dodge Ram 4x4.

photo

TS4685 Front Axle Inner Seal Installer Tool Set For the AAM 925 Front Drive Axle installs the Inner Axle Seals on all 2003-2009 Dodge Ram 2500 and Ram 3500 4x4 trucks. Kit includes QT1143 Seal Installer, QT1193 Thrust Plate, and TS1195 Press Screw Assembly. Specifically made to easily install QU10945 Genuine AAM Axle Seals without damaging the rather delicate seals or your Axle Adjuster Threads which are machined in the housing.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1143 Inner Axle Shaft Oil Seal Installer Plate for Dodge AAM 925 Front Axle Is specifically made to easily install original equipment QU10945 Front Axle Shaft Seals to the correct depth in all American Axle Manufacturing (AAM) 9-1/4" front beam axles used by Dodge for 2003 and newer Ram 2500 and Ram 3500 4x4 trucks plus 2004-2010 Ram 1500 Mega Cab 4x4s. Use with QT1193 Thrust Plate and TS1195 Press Screw.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1193 Thrust Plate for Dodge AAM 925 Front Axle Oil Seal Installation Is a double sided Plate that is used in conjunction with QT1143 Seal Installer and TS1195 Press Screw when installing original equipment QU10945 Front Axle Shaft Seals in all American Axle Manufacturing (AAM) 9-1/4" front beam axles used by Dodge for 2003 and newer Ram 2500 and Ram 3500 4x4 trucks plus 2004-2010 Ram 1500 Mega Cab 4x4s.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1195 Front Inner Axle Shaft Seal Press Screw Assembly For 2003 and newer Dodge AAM 925 14 Bolt Front Axles. Use with QT1143 Seal Installer and QT1193 Thrust Plate to quickly and easily press the Inner Axle Shaft oil seals in your Dodge Ram 4x4 front axle.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1082 Ball 7 Piece Joint Press Set Is specifically tailored to press out and press in Dodge original equipment American Axle Manufacturing (AAM) Ball Joints (QK4586) in your 2003 to 2011 heavy-duty Dodge Ram 2500 or Ram 3500 4x4 truck. Will also work on any aftermarket ball joints made to the original AAM exterior dimensions.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS4851 Ball Joint Press Set This 6 Piece Ball Joint Press Set is specifically tailored to press out and press in our Greaseable Ball Joints (QK4850) in your 2003 to 2011 heavy-duty Dodge Ram 2500 or Ram 3500 4x4 truck. This Kit is identical to our TS1082 Kit EXCEPT it does not include QT1155 Adapter as both our upper and lower greaseable Ball Joints are made to use QT1067 installer.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1109 Hex Impact Socket Is used to remove/install the metric front hub to knuckle bolts and caliper support to knuckle bolts on 2003 to 2011 Dodge Ram 1500 Mega Cab, Ram 2500, and Ram 3500 4x4 trucks with American Axle AAM 925 beam type front drive axles.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1816 Inner Pinion Bearing Cup Installer Has a tapered body so your bearing cup will not be damaged during installation.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1812 Outer Pinion Bearing Cup Installer Has a tapered body so your bearing cup will not be damaged during installation.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1100 Series Driver Handles Are used in conjunction with our seal and bearing cup installers.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1117 Differential Adjuster Nut Wrench For Dodge 2003-2012 AAM 9.25 front beam axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

TS5004 6 Piece Ball Joint Adapter Tool Set (no Press) is specifically tailored to press out and press in Dodge original equipment American Axle Manufacturing (AAM) Ball Joints (QK4586) in your 2003 to 2011 heavy-duty Dodge Ram 2500 or Ram 3500 4x4 truck. Will also work on any aftermarket ball joints made to the original AAM exterior dimensions.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS5005 5 Piece Ball Joint Adapter Tool Set For 2003-UP DODGE RAM 2500 & 3500 WITH GREASEABLE BALL JOINTS.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!