2013-2018 Ram 2500, Ram 3500 AAM 9.25" Front Axle with Radius Arm Suspension

The American Axle Manufacturing AA 9-1/4" (235mm) 12 bolt electronic Central Axle Disconnect front axle was first introduced during the 2013 model year for Ram 3500 4x4 trucks. Using Vehicle Identification Number based part number look ups thru the Ram electronic parts catalog, almost all 2013 model year Ram 3500 trucks will have the new 12 bolt axle and most Ram 2500 trucks will have the older 14 bolt axle but there are exceptions depending upon the vehicle build date.  The axles are easy to tell apart both by the number of cover bolts and type of suspension. The older, 5,500 pound rated 14 bolt axle has two short trailing arms on each side to connect the back of the axle to the frame. The new 6,000 pound rated 12 bolt axle uses one long radius arm per side between the back of the axle and the frame. For the 2014 to 2018 model years, all Ram 2500 and Ram 3500 4x4s have the 12 bolt electronic CAD axle. With the higher axle rating and CAD design, many of the parts used on the 2013-2018 12 bolt axle are not interchangeable with the previous axle model. In addition to the standard, open differential found in most Ram HD models, an electronic locking differential was supplied as part of the Ram 2500 Power Wagon package.

Axle Complete Hub to Hub Assemblies, Diff Covers, and Housings

top_page
product note

The 2013.5-2018 AAM 9.25" axle assemblies, housings and covers are not interchangeable with the 2003-2013.5 axles.

A560667 2013.5-2018 12 Bolt Dodge Ram AAM 925 Front Axle Differential Cover Kit Replace that unsightly rusty or dented front diff cover on your big Ram with a new genuine AAM Diff Cover Fits all 2013.5-up Dodge Ram 2500 and Ram 3500 4x4 trucks. More Info
 

$28.69
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shafts

top_page

A560731 Left Axle Shaft Assembly for 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. A560731 is a top-quality, genuine American Axle Manufacturing (AAM) Original Equipment replacement part for your Heavy-Duty Ram. More Info

$337.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560732 Right Axle Shaft Assembly for 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. A560732 is a top-quality, genuine American Axle Manufacturing (AAM) Original Equipment replacement part for your Heavy-Duty Ram. More Info

$337.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4732 4x4 Front Axle Shaft Nut Kit For 2013-up Ram 3/4 and 1-ton 4x4 trucks with AAM beam type front axles. Kit includes two each original equipment nuts and washers plus new cotter keys. Fits Dodge AAM 925 14 Bolt front axles which are found on all 2013-on Ram 2500 and Ram 3500 4x4 trucks. More InfoAlso available: QK4732.5 Axle Shaft Nut & Washer Set for 1 side only and QU40114 Nut available separately

$34.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40617 Front Outer Axle Shaft Slinger for 2013 and newer Dodge Ram 2500, Ram 3500 4x4 trucks with AAM 9.25" front drive axles. More Info

$14.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shaft Seals and Axle Shaft Seal Kits

top_page
product note

The Axle Shaft Oil Seals in your Dodge AAM925 front axle are of composite construction combining a steel shell with a plastic axle shaft guide. The axle Shaft Seals are located right next to the differential bearing adjusters so complete axle disassembly is required to replace them. Trying to install these seals using makeshift tools usually results in a wrecked seal and boogered up differential adjuster threads. Our Installation Tool Kits TS4685 and QK4685 make short work of installing your new seals without damaging either the seal or axle housing.

photo

QU10945 Front Inner Axle Shaft Oil Seal For Dodge AAM 925 14 Bolt front axles which are found on all 2003-on Dodge Ram 2500 and 3500 4x4 trucks. These high-quality, oil-bath type Seals are genuine AAM parts. More Info

$26.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4685 Front Inner Axle Seal and Installation Tool Kit For the AAM 925 14 Bolt Front Drive Axle installs the Inner Axle Seals on all 2003-up Dodge Ram 2500 and Ram 3500 4x4 trucks. Kit includes QT1143 Seal Installer, QT1193 Thrust Plate, QT1195 Press Screw Assembly, and (2) QU10945 Seals. Specifically made to easily install QU10945 Genuine AAM Axle Seals without damaging the rather delicate seals or your Axle Adjuster Threads which are machined in the housing. More Info

$179.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4879 Front Inner Axle Shaft Oil Seal Kit For Dodge AAM 925 14 Bolt front axles which are found on all 2003-on Dodge Ram 2500 and 3500 4x4 trucks. Kit includes 2 QU10945 OEM oil-bath type Seals and 8 QU10861 OEM Hub to Knuckle Bolts. More Info

$44.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Universal Joints

top_page
product note

Our AAM and Torque King® axle shaft universal joints are made to fit your Dodge AAM 925 axle shaft yokes.

photo

TK50253 2013-up Genuine AAM Factory Lubed U-Joint Fits all 2013 and newer Ram 2500, Ram 3500 4x4 front axle shafts. QU50253 is a factory lubed u-joint that fits AAM 925 front axle shafts in the 2500/3500 series trucks. Includes inside lockup c-clips for axle applications. More Info

$49.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11173 2013-up Greaseable Axle U-Joint Fits all 2013 and newer Ram 2500, Ram 3500 4x4 front axle shafts. More Info

$99.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11263 2013-up Axle U-Joint Kit for Ram 2500, Ram 3500 4x4 trucks for front axle shafts. Includes 2 each genuine AAM axle u-joint, axle shaft nut, axle shaft washer, cotter key, and 8 hub to knuckle bolts. More Info

$119.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joints and Ball Joint Parts

top_page
product note

AAM upgraded the Ball Joint Set for the 2013.5-2018 12 Bolt Front Axle to handle the heavier axle weight rating compared to the the 2003-2013.5 axle. 

photo

QU11302 2013-up AAM Ball Joint Set for One Side is a genuine AAM non-greaseable ball joint service kit for Ram 2500, Ram 3500 9-1/4" 4x4 front axles. More Info

$89.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Central Axle Disconnect Parts

top_page
product note

In 4x2 mode, the electronic Central Axle Disconnect disengages the right axle shaft from the differential output (intermediate) shaft. Although all the axle shafts and internal differential gears ("spider gears") are turning any time the wheels rotate in 4x2 mode, the ring and pinion are effectively disconnected. The Ram CAD system is not quite as energy efficient as conventional lockout hubs that completely disengage the axle shafts from the wheel hubs, but it is effective in eliminating most of the parasitic draw associated with its live spindle hub design. The electronic CAD is more reliable than the vacuum controlled CAD found on many 1985-2002 era Dodge Ram 4x4s.

QU11373 2013-2018 Ram AAM CAD Front Axle Diff Output Shaft with internal bearing for 2013-2018 Ram 3500 and 2014-2018 Ram 2500 4x4s with AAM 9-1/4" 12 Bolt Front Axles with Electric Central Axle Disconnect. More Info

$322.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU11374 Bearing, Axle Shaft Support for 2013-2018 Ram AAM CAD Front Axles is the Ball Bearing that supports the outboard end of the differential output shaft in 2013-2018 Ram 3500 and 2014-2018 Ram 2500 4x4s with AAM 9-1/4" 12 Bolt Front Axles with Electric Central Axle Disconnect. More Info

$30.20
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU11375 CAD Shift Collar for 2013-2018 Ram 3500 and 2014-2018 Ram 2500 4x4s with AAM 9-1/4" 12 Bolt Front Axles with Electric Central Axle Disconnect. More Info

$30.20
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU11376 2013-2018 Ram AAM CAD Electric Actuator Assembly for 2013-2018 Ram 3500 and 2014-2018 Ram 2500 4x4s with AAM 9-1/4" 12 Bolt Front Axles with Electric Central Axle Disconnect. More Info

$492.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560678 Bolt, CAD Actuator to Axle Housing for 2013-2018 Ram 3500 and 2014-2018 Ram 2500 4x4s with AAM 9-1/4" 12 Bolt Front Axles with Electric Central Axle Disconnect. More Info

$0.75
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings, Individual Timken® Brand

top_page
product note

If you only need a bearing or two for your 2013-newer Dodge AA 9-1/4" front axle, we stock the best: Timken®. For the amount of work it takes to change most axle bearings, the extra cost for a Timken® diff or pinion bearing is a small price to pay for better steel, more uniform surface finish, and accurate, precision ground races. 

photo

QU50539 Timken® Outer Pinion Bearing Cup For 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. More Info

$9.25
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50540 Timken® Outer Pinion Bearing For 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. More Info

$19.89
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU12017 Timken® Inner Pinion Bearing Cup  For 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. More Info

$25.96
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50548 Timken® Inner Pinion Bearing For 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. More Info

$53.13
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50546 Timken® Differential Side Bearing Cup  For 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. (Requires 2) More Info

$17.76
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50547 Timken® Differential Side Bearing  For 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. (Requires 2) More Info

$27.95
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearing Kits

top_page
product note

A front axle rebearing job is a preventive maintenance service that should usually be performed on Dodge Ram trucks with 150,000 to 200,000 miles on the odometer to prevent catastrophic bearing related failures. Our Differential Bearing and Seal Kits include Timken® Differential and Pinion Bearings plus genuine original equipment American Axle Manufacturing (AAM) small parts needed to perform that all important front axle rebearing service.

A560882 AAM Master Differential Bearing and Seal Kit for 2003-2018 AAM 9-1/4" front axles in Ram 2500, 3500 and 2004-2010 Ram 1500 Mega Cab. More Info

$139.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Parts

top_page
product note

The open differential used in standard 2013-2018 Ram 2500 and Ram 3500 AAM 9-1/4" 12 Bolt front axles is not interchangeable with 2003-2013 AAM 9-1/4" 14 Bolt front axles. The e-locker used in 2014-2018 Power Wagons, is, however, the same as used on 2005-2013 Power Wagons.

A560680 2014-2018 AAM OEM Loaded Open Differential Assembly for 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. A560680 is a top-quality, genuine American Axle Manufacturing (AAM) Original Equipment replacement part for your Heavy-Duty Ram. More Info

$296.58
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560679 Front Differential Cover Pan Gasket for 2013-2018 Ram 2500, Ram 3500 4x4 Trucks with AAM 9-1/4" 12 Bolt Electric Axle Disconnect Axles. More Info

$19.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560630 Ring Gear Bolt with Factory Applied Threadlocker for 2013-2018 4x4 Dodge Ram 2500, Ram 3500 with the AAM 9-1/4" 12 Bolt solid beam 4x4 front axle which has electric Central Axle Disconnect and 3 link front suspension. A560630 is a top-quality, genuine American Axle Manufacturing (AAM) Original Equipment replacement part for your Heavy-Duty Ram. More Info

$1.38
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets

top_page
product note

The only gasket used in the 2013-2018 AAM 9-1/4" 12 bolt front axle is the differential cover gasket.

A560679 Front Differential Cover Pan Gasket for 2013-2018 Ram 2500, Ram 3500 4x4 Trucks with AAM 9-1/4" 12 Bolt Electric Axle Disconnect Axles. More Info

$19.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Stock Hub Assemblies and Parts

top_page
product note

The front wheel bearings on 2013-2017 Dodge 4x4 3/4 and 1 ton trucks with AAM 9-1/4" front axles are of unitized construction. They are not serviceable and no replacement bearings or seals are available for them. Single Rear Wheel (SRW) and Dual Rear Wheel (DRW) trucks use the same hub.  If your front wheel bearings are noisy or loose, you need to replace the hub and bearing assembly with one of these OEM quality hub assemblies.

QU11316 2013-2018 Ram 2500, Ram 3500 Front Wheel Hub Kit Is an original equipment manufacturer 8 bolt front hub assembly complete with ABS sensor and cable. QU11316 fits all 2014-2018 Ram 2500 and 2013-2018 Ram 3500 4x4 Trucks with either single or dual rear wheels. For 2013, QU11316 fits Ram 2500, Ram 3500 trucks built After May 27, 2013 with the Radius Arm type front suspension. More Info

$357.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hub Kits, Performance Rebuildable by Dynatrac and Yukon

top_page
product note

Replace those troublesome and expensive factory unit hubs. Upgrade your big Ram 4x4 to have rebuildable Front Wheel Hubs with replaceable Timken® Tapered Wheel Bearings, and Fuel Saving Lock Out Hubs. We stock Dynatrac Free-Spin™ and Yukon Spin Free® performance Serviceable Front Hub Kits for your Ram. For Single Rear Wheel (SRW) Ram 2500, Ram 3500, kits are available with your choice of Dynaloc™, Mile Marker®, Warn®, or Yukon® Lockout Hubs. Have a Ram 3500 dually? Check out our Yukon Spin Free® Kits with direct-fit wheel hubs that eliminate the need for a separate wheel adapter. Want the ultimate Kit that has it all in one package? See Our Torque King Master Kits featuring a USA made Dynatrac Free-Spin™ Kit, 3 Hub Lock choices, premium Axle U-joints, Install Tools, and more!
Benefits of These Kits include:
Better Fuel Mileage
Reduced Wear and Tear on the front axle gears, front driveshaft, and transfer case
Easy to service and/or replace the popular, readily available, economical tapered front wheel bearings
Allow operation in 4x2 low range when hubs are unlocked for backing up trailers or other low speed maneuvering

photo

TK4900 Series Torque King® Master Front Serviceable Wheel Hub and Lockout Hub Kits with Dynatrac Free-Spin™ Kit, Axle U-Joints and Install Tools for 2013.5-2017 Dodge Ram 2500, Ram 3500 trucks with single rear wheels. TK4900 Series Kits include all the parts, special assembly tools, and extras needed to upgrade your heavy-duty Ram 4x4's front axle to low-cost serviceable wheel bearings and your choice of fuel-saving lockout hubs. The heart of all these comprehensive Kits are USA made Dynatrac Front Free-Spin™ Hub Kit PLUS, our comprehensive Master Kits ALSO include Spindle Nut Socket, Torque King® Factory Lubed Axle U-Joints, wheel seal tools, bearing packer, synthetic wheel bearing grease, threadlocker, and anti-seize compound. Kits direct fit single rear wheel trucks. Will also fit dually models with optional wheel adapters, see More Info Tech Notes if you have a Dodge Ram 3500 with Dual Rear Wheels (DRW). More Info

 

photo

TK11200 Series Dynatrac Free-Spin™ Kits for 2013.5-2017 Dodge Ram 2500, Ram 3500 TK11200 Series Kits include the conversion parts and your choice of fuel-saving lockout hubs to upgrade your heavy-duty Ram 4x4's front axle. Each Kit includes a complete, USA made Dynatrac Front Free-Spin™ Hub Kit with heat-treated chromoly spindles, spindle bearings, spindle seals, Timken® wheel bearings, Timken® or Dana wheel seals, 35-spline 1.50-inch chromoly outer shafts, 8 bolt wheel hubs, your choice of Hub Locks, double spindle nut kit, and instructions. All Kits direct fit single rear wheel trucks. Will also fit dually models with optional wheel adapters, see More Info Tech Notes if you have a Dodge Ram 3500 with Dual Rear Wheels (DRW). More Info

photo

Y100014 Yukon Spin Free® Front Locking Hub Conversion Kits for 2013.5-2017 Dodge Ram 2500, Ram 3500 Single Rear Wheel 4x4s Y100010 Series Kits fit 2013-2017 Dodge AAM front axles in Ram 2500, Ram 3500 4x4 with single rear wheels. The Yukon worry free, Spin Free® Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, low-profile Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. More Info

$1,802.62
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

Y100003 Yukon Spin Free® Front Locking Hub Conversion Kit for 2013.5-2017 Dodge Ram 3500 Dual Rear Wheel 4x4s Y100004 Series Kit fit 2013.5-2017 Dodge AAM front axles in Ram Ram 3500 4x4 with dual rear wheels. The Yukon worry free, Spin Free® Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs with integral wheel adapters, spindles, high strength Yukon 4340 Chrome-Moly outer axles, low-profile Yukon Hardcore premium locking hubs, Timken bearings, high-quality seals and all hardware for installation. More Info

$1,845.33
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous Parts & Lubricants

top_page
photo

QU40617 Front Outer Axle Shaft Slinger for 2013-up Dodge Ram 2500, Ram 3500 4x4 trucks with AAM 9-1/4" front drive axles. More Info

$14.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU11378 1 Quart 75W85 GL5 Synthetic Gear Lubricant for 2013-2018 Dodge Ram AA-235 (AAM 9-1/4") 12 bolt front axles. More Info

$16.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

S24200 Blue Threadlocker For hub, caliper anchor, and ring gear bolts etc. Also see catalog page for small packet of blue threadlocker option. More Info

$6.91
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90008 Gear Marking Compound Use with QT9404 Brush to check your ring and pinion gear tooth pattern. More Info

$3.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

S9975 Anti-Seize Lubricant Use between the hub and knuckle mating surfaces to prevent rust bonding. Also see catalog page for a 1 ounce tube of Anti-Seize option. More Info

$1.62
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90018 Pyroplex® Protection ES Synthetic Grease Provides extended service protection for your outer axle shaft splines and greaseable aftermarket steering linkage parts. More Info

$9.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

S9980 Dielectric Grease Use in the ABS Brake Wire Connectors. More Info

$1.93
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Flanges and Pinion Seals

top_page
product note

The 2013-2018 Ram American Axle Manufacturing (AAM) 12 bolt, 3 link, electric disconnect front axle uses a unique, serrated pinion flange. The pinion seal is a carryover from the previous generation axle.

photo

QU10865 Pinion Seal for Ram American Axle 9-1/4" Front Axle Is a genuine original equipment AAM Pinion Seal for all 2013-2018 4x4 Ram 2500, Ram 3500 trucks with the AAM 9-1/4", 12 Bolt, Electric Disconnect, solid beam 4x4 front axle. More Info

$13.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560740 Front Pinion Flange with Wear Sleeve for 2013-2018 Ram 2500, Ram 3500 is a flat face, genuine American Axle replacement part for 2013-2018 Ram 3500 and 2014-2018 Ram 2500 with AAM 9-1/4" 12 bolt, electric disconnect front axles. More Info

$85.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ring and Pinion Sets

top_page
product note

AAM built axles five different gearsets for 2013-2018 Ram 2500, Ram 3500 with the American Axle 235 mm (9-1/4") 12 bolt, electric disconnect, 3-link suspension, solid beam front axle. The Power Wagon takes a unique 4.10 ratio ring and pinion. The available factory ratios for non-locking axles are 3.42, 3.73, 4.10, 4.44.

A560942 3.42 Ratio Ring and Pinion Set for 2013-2018 Ram 2500, Ram 3500 AA 9-1/4" 12 Bolt Front Axles is a high quality, genuine American Axle Manufacturing 3.42 ratio replacement gear set with matched ring and pinion gears. More Info

$304.62
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560944 3.73 Ratio Ring and Pinion Set for 2013-2018 Ram 2500, Ram 3500 AA 9-1/4" 12 Bolt Front Axles is a high quality, genuine American Axle Manufacturing 3.73 ratio replacement gear set with matched ring and pinion gears. More Info

$299.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560946 4.10 Ratio Ring and Pinion Set for 2013-2018 Ram 2500, Ram 3500 AA 9-1/4" 12 Bolt Front Axles is a high quality, genuine American Axle Manufacturing 4.10 ratio replacement gear set with matched ring and pinion gears for open differential Ram 2500, Ram 3500. NOTE: Does not fit Power Wagon. More Info

$299.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560947 4.44 Ratio Ring and Pinion Set for 2013-2018 Ram 2500, Ram 3500 AA 9-1/4" 12 Bolt Front Axles is a high quality, genuine American Axle Manufacturing 4.44 ratio replacement gear set with matched ring and pinion gears. More Info

$299.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
product note

Sometimes, you just need one or two small parts to get back on the road. Between the small parts listed in this section and many others listed under part specific headings elsewhere on the page, we probably have that pesky little part you have to have but just can't find anywhere else.

photo

QU40617 Front Outer Axle Shaft Slinger for 2013-2018 Ram 2500, Ram 3500 4x4 trucks with AAM 9-1/4" front drive axles. More Info

$14.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10861 Hub Retaining Bolt for 2013-2018 Ram AAM 925 Front Axles is a genuine original equipment Bolt, four of which are used to secure your wheel hub to the American Axle Manufacturing AAM 9-1/4" front axle steering knuckles on 2013-2018 4x4 Ram 2500 and Ram 3500 4X4 trucks. More Info

$1.25
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10863 AAM 925 Front Axle Pinion Nut is a genuine AAM original equipment lock nut for all 2013-2018 4x4 Ram 2500 and Ram 3500 trucks with the AAM 9-1/4" 12 bolt Electric Central Axle Disconnect Front Axle.  More Info

$3.87
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10864 Front Axle Pinion Washer is a genuine AAM original equipment lock nut for all 2013-2018 4x4 Ram 2500 and Ram 3500 trucks with the AAM 9-1/4" 12 bolt Electric Central Axle Disconnect Front Axle. More Info

$3.14
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10862 AAM 925 Collapsible Pinion Preload Spacer (Crush Sleeve) is a genuine AAM original equipment lock nut for all 2013-2018 4x4 Ram 2500 and Ram 3500 trucks with the AAM 9-1/4" 12 bolt Electric Central Axle Disconnect Front Axle. These Pinion Preload Spacers are installed between the pinion stem and outer pinion bearing. More Info

$4.82
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU11308 Differential Bearing Adjuster Nut for 2013-2018 Ram 2500, Ram 3500 Front Axle is a genuine AAM replacement part. More Info

$35.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560021 Lock, Diff Bearing Adjuster for 2013-2018 Ram 2500, Ram 3500 Front Axle is a genuine AAM original equipment replacement part. More Info

$3.53
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560058 Differential Adjuster Lock Bolt for 2013-2018 Ram 2500, Ram 3500 Front Axle is a genuine AAM original equipment replacement part. More Info

$2.69
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

A560678 Bolt Differential Cover or CAD Actuator to Axle Housing for 2013-2018 Ram 2500, Ram 3500 is a genuine AAM replacement bolt. Your axle uses 16 total, 12 for the differential cover and 4 for the CAD housing. More Info

$0.75
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Steering Knuckles

top_page
product note

Steering Knuckles are considered a non-wear part and rarely need to be replaced unless the vehicle is subjected to a severe front end hit or the ball joint or tie rod nuts are improperly tightened.

photo

QU11264 Left Steering Knuckle for 2013-2018 Ram 2500, Ram 3500 4x4 trucks. This is a genuine AAM replacement part. More Info

$238.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11265 Right Steering Knuckle for 2013-up Dodge Ram 2500, Ram 3500 4x4 trucks. This is a genuine AAM replacement part. More Info

$238.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Steering & Suspension Parts

top_page

TK70078 Carli Adjustable Track Bar for 2013.5-2017 Ram 2500 and Ram 3500 4x4s with AAM 9.25 Front Axle with 2 radius arm type front suspension. This Adjustable Track Bar is a must if you have wandering steering or with an aftermarket lift. The track bar will center the axle side to side and ensure proper suspension geometry. More Info

$395.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

TK70080 Stainless Steel Low Mount Steering Stabilizer for 2013.5-2017 Ram 2500, Ram 3500 4x4 trucks with Radius Arm Front Suspension. Also fits 2013 Ram 2500, Ram 3500 models with radius arm type front suspension. This Stainless Steel Low Mount Steering Stabilizer is a direct fit replacement. The Stainless Low Mount Stabilizer is a must have addition if you are running larger tires or suffering from lack of control due to your worn out factory stabilizer. More Info

$230.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
product note

Having the right tool for the job makes the work easier and faster, plus the correct tool will usually minimize the chances of wrecking parts. We offer many special tools made specifically for the American Axle Manufacturing 9-1/4" Ring Gear front axle in your 2003 or newer big Dodge Ram 4x4.

photo

TS4685 Front Axle Inner Seal Installer Tool Set For the AAM 925 Front Drive Axle installs the Inner Axle Seals on all 2013-2018 Dodge Ram 2500 and Ram 3500 4x4 trucks. Kit includes QT1143 Seal Installer, QT1193 Thrust Plate, and TS1195 Press Screw Assembly. Specifically made to easily install QU10945 Genuine AAM Axle Seals without damaging the rather delicate seals or your Axle Adjuster Threads which are machined in the housing. More Info

$149.90
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1143 Inner Axle Shaft Oil Seal Installer Plate for Dodge AAM 925 Front Axle Is specifically made to easily install original equipment QU10945 Front Axle Shaft Seals to the correct depth in all American Axle Manufacturing (AAM) 9-1/4" front beam axles used by Dodge for 2003 and newer Ram 2500 and Ram 3500 4x4 trucks plus 2004-2010 Ram 1500 Mega Cab 4x4s. Use with QT1193 Thrust Plate and TS1195 Press Screw. More Info

$52.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1193 Thrust Plate for Dodge AAM 925 Front Axle Oil Seal Installation Is a double sided Plate that is used in conjunction with QT1143 Seal Installer and TS1195 Press Screw when installing original equipment QU10945 Front Axle Shaft Seals in all American Axle Manufacturing (AAM) 9-1/4" front beam axles used by Dodge for 2003 and newer Ram 2500 and Ram 3500 4x4 trucks plus 2004-2010 Ram 1500 Mega Cab 4x4s. More Info

$46.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1195 Front Inner Axle Shaft Seal Press Screw Assembly For 2003 and newer Dodge AAM 925 14 Bolt Front Axles. Use with QT1143 Seal Installer and QT1193 Thrust Plate to quickly and easily press the Inner Axle Shaft oil seals in your Dodge Ram 4x4 front axle. More Info

$59.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1816 Inner Pinion Bearing Cup Installer Has a tapered body so your bearing cup will not be damaged during installation. More Info

$25.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1812 Outer Pinion Bearing Cup Installer Has a tapered body so your bearing cup will not be damaged during installation. More Info

$19.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1100 Series Driver Handles Are used in conjunction with our seal and bearing cup installers. More Info

$19.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!