Front Axle Parts for 1998-1999 Dodge Ram 2500 & 35004x4 Trucks with Dana-Spicer Model 60 248 FBI Axles

The heavy-duty, Dana-Spicer, Model 60 248 Front Beam-Design Iron (FBI) axle was used on all 1998 and 1999 Ram 2500 3/4 ton and Ram 3500 1 Ton 4x4 trucks regardless of engine. 1998 marked the first year that Dodge did not offer any 3/4 ton truck with a Model 44 front axle since civilian type 3/4 ton 4x4s were introduced in 1957.

All the Dana 60 front axles used in 1998 and 1999 Dodge Ram 2500/3500 4x4's were factory equipped with a vacuum actuated Central Axle Disconnect (CAD) system whereas, the preceding 1994-1997 axles although, very similar had a number of significant optional integrated front wheel ABS sensors and redesigned steering linkage.

The Dana 60 Front Axle was substantially redesigned for the 2000 model year. Despite the outward similarity of the new axles, relatively few parts are interchangeable between 1994-1999 era axles and 2000-2002 axles.

Axle Identification

top_page
photo

All 1994-1999 Dana Front Axles in Dodge Ram trucks had a Bill of Material Number (BOM) stamped on a Build Tag (red arrow) attached to the differential by two of the differential cover bolts (yellow arrows) when the vehicle was shipped from the factory. Unfortunately, these tags are often missing on trucks that had prior differential service. The BOM number is a 6 digit number beginning with a 6 plus a dash number (ex: 610604-2). They can be used to determine not only the axle model, but also what components the axle was originally built with. We often ask for this number to insure we provide you with the exact parts you need for your truck.

Each different BOM number signifies an engineering part change which may be minor or major and may involve one or more parts. The dash number indicates the axle ratio. For 1994-1999 Ram 2500 and 3500 trucks built for civilian use, 3.54 ratio is a -1, 4.10 ratio is -2.

photo

Anti-Lock Brakes: 1998-1999: Optional. ABS sensor is internal, reading off tone ring inside each front wheel hub assembly.

Cover: 10 Bolt, 12" high

Ring Gear: 9-7/8", 12 Bolt

Suspension: Coil spring

Steering Linkage: 1998-1999 uses tie rod that attaches to each steering knuckle. Drag link goes from steering gear to tie rod.

Ball Joints: Pressed in steering knuckles, nuts at top

Ram 2500 Bill of Material Numbers by Year 
1998:
610808, 610810, 610719, 610720
1999: 610788, 610828, 610829 
 Ram 3500 Bill of Material Numbers by Year  
1998: 610723, 610809, 610811
1999: 610789, 610791, 610830
 Military Air Force Tow Vehicle Bill of Material Numbers. All have 7.17 ratio gear sets  
1998: None Listed
1999: 610832-1

 

Axle Shafts for 1998-1999 Model 60 Axles

top_page
product note

Broken Axle Shafts are not very common with the Model 60 unless a worn-out u-joint has been slapped around causing the shaft yokes to give way. Replacing your outer axle shaft is one of those things that is bound to happen while living in the rust belt or cruising ocean beach areas that can cause the rusted threads to strip from the shaft while removing the outer nut. Choose from our full range of genuine original equipment axle shafts which feature both precise fit and great strength.

photo
QU40340 Outer Shaft with Slinger For all 1998 Dodge Ram 2500, 1999 Dodge Ram 2500 as well as the 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks with or without ABS. Genuine original equipment 33 spline shaft has outer end threaded for nut (QU40114 ). Made in Mexico
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40247 Right Inner Axle Shaft (from CAD to u-joint) for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40247 Right Inner Axle Shaft also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Genuine original equipment 15 spline shaft includes inner bushing (QU40107 ). Made in Mexico.

QU40691 Used Right Axle Shaft Assemblies while supply lasts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40350 Left Inner Axle Shaft For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40350 Left Inner Axle Shaft also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Genuine original equipment 30 spline shaft. Made in Mexico.

QU40692 Used Left Axle Shaft Assemblies while supply lasts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40300 Differential Output or Intermediate Shaft For all 1998 Dodge Ram 2500 ¾ ton, 1999 Dodge Ram 2500 ¾ ton 4x4 trucks. QU40300 Differential Output or Intermediate Shaft also fits all 1998 Dodge Ram 3500 1 ton, and 1999 Dodge Ram 3500 1 ton 4x4 trucks. This Genuine OEM Shaft is the innermost shaft on the right (passenger) side
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4732 Axle Shaft Nut and Washer Set Fits the outer stub axle shafts on all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4732 Axle Shaft Nut and Washer Kit also fits the outer stub axle shafts on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4732.5 One Side Axle Shaft Nut and Washer Set Fits the outer stub axle shafts on all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4732.5 Axle Shaft Nut and Washer Kit also fits the outer stub axle shafts on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40691U Used Right Axle Shaft Assembly for 1998-1999 Dodge Dana 60 front axle.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40692U Used Left Axle Shaft Assembly for 1998-1999 Dodge Dana 60 front axles.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Universal Joints for 1994-1999 Model 60 Axles

top_page
product note

We offer three different Universal Joints for your hard working Dodge Ram Truck. All are plenty strong for the job, but different manufacturing techniques and seal types will have a major influence on the ultimate life of the joint. Our most popular choice is our TK40724 cold-forged, non-greaseable, original equipment replacement U-Joint. The wear-resistant cold-forged cross and superior sealing make it the best choice for both low maintenance and long life. Greaseable TK40715 U-Joints are a greaseable version of our TK40724 joints, giving you the durability advantages of cold-forging and better seals with the option to re-lube the joint at any time for unmatched longevity. QU30332 's are hot-forged and are equipped with simple rubber seals. With good maintenance and quality lubricant like our QU90018 Pyroplex® Plus Grease, these joints will last and last. See our individual product pages for more info.

photo
QU30332 Greaseable Axle U-Joint for Dodge Dana-Spicer Model 60 Front Axle This greaseable axle universal joint fits all of these Dodge Ram 2500 applications 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500. This greaseable axle Universal Joint also fits the 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500. Value priced with Hot-Forged cross and flexible rubber seals
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK40724 Torque King® Greaseable U-Joint This premium greaseable axle universal joint fits all of these Dodge Ram 2500 applications 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500. This premium greaseable Axle Universal Joint also fits 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500. Premium Cold-Forged cross and superior pressure-type seals, plus it is greaseable for unmatched life and durability!
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK40715 Torque King® Premium Non-Greaseable U-Joint This premium non-greaseable axle universal joint fits all of these Dodge Ram 2500 applications, 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500. This premium non-greaseable Axle Universal Joint also fits 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500. Original equipment type with Premium Cold-Forged cross and superior pressure-type seals
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

TK42117 Greaseable and Rebuildable CTM 1480WJ Series Performance Axle U-Joint for Dodge Dana 60 Beam Type Front Axles.

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joints for 1998-1999 Dodge Model 60

top_page
product note

The Ball Joints used in your 1998-1999 Dodge Model 60 are not used in any other year or model of Dodge truck. While they are not as long-lasting as the King Pin design used on 1993 and older trucks, they are much more durable than those used on 2000 and newer Rams because both upper and lower Ball Joints are weight carrying. The Ball Joints are pressed into the steering knuckle simplifying service. Ball Joint Tool Kit TS4511 7 Piece Ball Joint Tool Kit is recommended for safety and speed, but other press methods can be used with appropriate safety precautions. All our Ball Joints for this application are genuine Dana-Spicer parts. Choose from either genuine original equipment factory lubed Ball Joints, or Greaseable Ball Joints. Read Tech Notes Below.

tech note

Dan the Gear Man® Tech Note 1: There is insufficient clearance between the axle shaft and upper greaseable ball joints to leave in a grease fitting. After greasing, you need to remove the 90 fitting and replace it with a supplied threaded plug. The procedure is tedious but not difficult unless you are "all thumbs".

Dan The Gear Man® Tech Note 2: The good news is Ball Joint replacement on these trucks is pretty easy unless the front end of your Dodge has never been apart before. Getting rusted-in wheel hubs broke free from the knuckle on your 1998-1999 Ram can be a REAL WITCH! However, not near as bad as a 2000 or newer!

photo
TS4511 7 Piece Dana 60 Ball Joint Press Set Works on all 1998-1999 Dodge Ram Dana 60 Front Axles. Change your Ball Joints the easy and safe way with our C-Frame Press and Montana made, CNC machined press adapters! TS4511 is the Tool Kit you need to service the Ball Joints on 1998 and 1999 Dodge Ram 2500, Ram 3500 4x4 trucks
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4511 Dana OEM Ball Joint Kit for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4511 4x4 Ball Joint Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. This Kit, which features genuine Dana-Spicer original equipment, Factory Lubed Ball Joints, includes: 2 Upper Ball Joints, 2 Lower Ball Joints, Ball Joint Hardware, QU40090 CAD Gasket, Cotter Keys for the Tie Rod Ends, Threadlocker, Anti-Seize, Disc Brake Lube, and RTV sealant. Ball Joints Made in Canada, most other parts Made in U.S.A.

Dan the Gear Man® Recommended Optional Special Tools for This Kit:TS4511 Ball Joint Press Set, QT1008 Axle Shaft Nut Socket, QT1027 or QT1022 Hub Bolt Socket, QT1103 Driver Handle or QT1073 Air Hammer Attachment, and QT9216 Hex Bit Socket.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4758 Greaseable Ball Joint Kit for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4758 Greaseable Ball Joint Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. This Kit, which features Dana-Spicer Greaseable Ball Joints, includes: 2 Greaseable Upper Ball Joints, 2 Greaseable Lower Ball Joints, Ball Joint Hardware, QU40090 CAD Gasket, Cotter Keys for the Tie Rod Ends, Threadlocker, anti-seize, disc brake lube, and RTV sealant.

Dan the Gear Man® Recommended Optional Special Tools for This Kit:TS4511 Ball Joint Press Set, QT1008 Axle Shaft Nut Socket, QT1027 or QT1022 Hub Bolt Socket, QT1103 Driver Handle or QT1073 Air Hammer Attachment, and QT9216 Hex Bit Socket.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40220 Dana OEM Non-Greaseable Ball Joint Set 1 side For 1998-1999 Dodge Ram 2500, Ram 3500 Dana 60 front axle
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK42057 Dynatrac Heavy-Duty Rebuildable BallJoints™ for Dana 60 Solid Beam Type Front Drive Axles includes 4 American Made Rebuildable Ball Joints with ball joint hardware and installation instructions. TK42057 fits:
1998-1999 Dodge Ram 2500 4x4 with Dana 60 Front Axle (will have 8800 pound GVW or higher)
1998-1999 Dodge Ram 3500 4x4 (ALL)

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Brake Parts

top_page
product note

Brake Splash Shields deflect road splash and grit from the brake rotors. Rust from road salts or corrosive soils is the most common cause for replacement. The shields can also be bent or torn from hitting rocks off road or from accident damage. Another cause of wrecked shields and also spacers is incorrect service procedures including driving a chisel between the hub and knuckle during disassembly.

The Brake Shields and Spacers for 1998 and 1999 trucks will differ depending upon if your truck has or does not have 4 wheel Antilock Brake Systems (ABS).

photo
QU10959 Brake Splash Shield For trucks with Rear Wheel ABS Systems Protect your brake pads and rotors from damaging road grit. QU10959 is a genuine original equipment part that will directly replace your rusted or damaged original Left or Right Shield. Fits Rear Wheel Anti-lock Brake Applications only. QU10959 Brake Splash Shield fits all 1998-1999 Dodge Ram 2500 and Ram 3500 4x4 trucks. Made in U.S.A
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10961 Brake Shield Spacer For trucks with Rear Wheel ABS Systems fits between QU10959 Brake Splash Shield and your steering knuckle. If your Spacer is badly rusted or badgered up by someone trying to force a tool between the hub and knuckle, replace it with our genuine original equipment QU10961 Spacers that fit left or right side of trucks with Rear Wheel Anti-lock Brake Applications only. QU10961 Brake Shield Spacer fits all 1998-1999 Dodge Ram 2500 and Ram 3500 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11048 Brake Splash Shield For trucks with 4 Wheel ABS Systems Protect your brake pads and rotors from damaging road grit. QU11048 is a genuine original equipment part that will directly replace your rusted or damaged original Left or Right Shield. Fits Four Wheel Anti-lock Brake Applications only. QU11048 Brake Splash Shield fits all 1998-1999 Dodge Ram 2500 and Ram 3500 4x4 trucks
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10962 Brake Shield Spacer For trucks with 4 Wheel ABS Systems fits between QU11048 Brake Splash Shield and your steering knuckle. If your Spacer is badly rusted or badgered up by someone trying to force a tool between the hub and knuckle, replace it with our genuine original equipment QU10962 Spacers that fit left or right side of trucks with Four Wheel Anti-lock Brake Applications only. QU10962 Brake Shield Spacer fits all 1998-1999 Dodge Ram 2500 and Ram 3500 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10970 1998-1999 Ram 2500, Ram 3500 Rubber Front Brake Caliper Pin Support Bushing Is a high quality, long lasting genuine equipment part. QU10970 fits all 1998-1999 Dodge Ram 2500 and Ram 3500 4x4 trucks
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50036 Right ABS sensor For 1998-1999 Dodge Ram 2500, Ram 3500 4x4
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

CAD Individual Parts (Central Axle Disconnect)

top_page
photo
QU11061 Front Axle Disconnect Main Vacuum Hose Harness For Dodge Ram 4x4's goes from the engine line to transfer case switch and down to the frame cross member
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11062 Front Axle Vacuum Harness For Dodge Ram 4x4's. Includes steel frame lines and flexible axle hoses with connectors
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40317 CAD Axle Shift Housing Genuine original equipment aluminum housing to replace broken or damaged housings on your heavy-duty Ram. For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40317 CAD Axle Shift Housing also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10966 CAD Disconnect Switch Genuine original equipment indicator switch screws into QU40317 housing. Also order QU10967 O-Ring. This switch will send a signal to your 4x4 indictor light when the front axleis is locked into 4x4 mode. Fits all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU10966 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Dan the Gear Man® Product Note: If you need the Vacuum Switch mounted on your transfer case, please see QU10569 Transfer Case Vacuum Switch Product Page.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10967 O-Ring for CAD Switch Seals oil from leaking between the CAD Housing and Switch. For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU10967 O-Ring also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Also included in QK4627

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40292 Output Shaft Support Bearing Is located in your right axle tube, just to the left of the rectangular CAD opening. This genuine original equipment, press-fit bearing supports the splined end of the differential output (what Dodge calls the intermediate shaft). For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. This Bearing also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40107 Plastic Axle Bushing Is a very common part to wear out. This genuine, original equipment Plastic Bushing fits inside the inner end of your right inner axle shaft. It is the only direct support for right axle shaft assembly besides the wheel hub. For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40107 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40246 CAD Sliding Clutch Collar Couples the differential output shaft and right axle shaft when you activate Four Wheel Drive. Fits all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40246 Clutch Collar also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50048 Breather Hose Clamp For Axle Vent Hose original equipment type, 1-ear clamp is used to secure the axle vent hose to the axle breather located on the CAD housing. For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU50048 Clamp also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Also included in QK4627

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40156 CAD Shift Fork Pad Is a genuine original equipment part. For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. This Shift Fork Pad also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Also included in QK4627

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40090 Metal Reinforced Central Axle Disconnect Gasket for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40090 Gasket also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Also included in QK4511, QK4758 and QK4627

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40162 E-Clip is used to secure your Shift Fork to the Vacuum Actuator Shift Rod (QU40224) on Dodge 4x4s with vacuum controlled Central Axle Disconnect (CAD) systems. Order (2) QU40162 for original equipment Actuators. Order (1) QU40162 and (1) QU40516 for most Aftermarket ActuatorsFor all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4511 4x4 Ball Joint Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. This C-Clip also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Sold individually.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40223 E-Clip is used to Secure your Vacuum Actuator to the aluminum shift housing (QU40317/QU42119 ) on Dodge 4x4s with vacuum controlled Central Axle Disconnect (CAD) systems. Of the 3 E-Clips used on CAD axles, this is the largest one. Also see QU40224, QU40162, and QU40516 for All 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40223 C-Clip also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40516 E-Clip For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40516 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40272 O-Ring is used on Dodge 4x4 vehicles with vacuum controlled Central Axle Disconnect (CAD) systems. This O-Ring fits in a groove machined in the vacuum actuator mounting stem (QU40224) that slips inside the shift housing (QU40317/QU42119).

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

CAD Parts and Tool Kits (Central Axle Disconnect)

top_page
photo
QK4627 CAD Small Parts Kit Includes: QU40090 CAD Gasket, QU40272 O-Ring, 2 QU40156 Shift Fork Pads, QU50048 Hose Clamp, and the 3 E-Clips for the original equipment motor and fork mounting. For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4627 CAD Small Parts Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Please refer to QK4627 page for more details and ordering information.

Dan the Gear Man® Tech Note: The two smaller E-Clips supplied in this Kit fit the original equipment actuator shaft. Most aftermarket shafts have at least one groove that is machined to a smaller diameter. The original equipment clips supplied in this Kit will not fit those smaller diameter grooves.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QA4628 Shift Fork Kit for Dodge Ram with Central Axle Disconnect For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QA4628 Shift Fork Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.Kit includes genuine, aluminum original equipment fork and two shift fork pads.

Please refer to QK4628 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40224 Vacuum Shift Kit For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40224 Vacuum Shift Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Kit includes: vacuum actuator, QK4627 CAD Parts Kit and new retaining bolts with lock washers.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4625 Right Axle Bearing Kit For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4625 Right Axle Bearing Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 Diesel and V10 plus all V8 with the Model 60 front Axle trucks.

Please refer to QK4625 page for more details and ordering information.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11309 Central Axle Disconnect Eliminator Kit for 1994-1997 Dodge Ram 2500, Ram 3500 Dana 60 front axles.
More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU42119 Replacement CAD Axle Shift Housing Kit aluminum housing to replace broken or damaged housings on your heavy-duty Ram. For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU42119 CAD Axle Shift Housing also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential & Pinion Timken® Original Equipment Quality Bearings

top_page
photo
QU50397 Timken® Differential Bearing Cup For Model 60 Front Axles for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU50397 Differential Bearing Cup also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Also included in TK4855 and TK4843

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50398 Timken® Differential Bearing For Model 60 Front Axles for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU50398 Differential Bearing also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Also included in TK4855 and TK4843

photo
QU40184 Timken® Differential Bearing Set For Model 60 Front Axles for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40184 Differential Bearing Set also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50400 Timken® Outer Pinion Bearing Cup For Model 60 Front Axles for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU50400 Outer Pinion Bearing Cup also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. For an original equipment Outer Pinion Bearing Cup and Cone Set, see QU40182 .

Also included in TK4855 and TK4843

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50401 Timken® Outer Pinion Bearing For Model 60 Front Axles for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU50401 Outer Pinion Bearing also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. For an original equipment Outer Pinion Bearing Cup and Cone Set, see QU40182 .

Also included in TK4855 and TK4843

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50406 Timken® Inner Pinion Bearing Cup For Model 60 Front Axles for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU50406 Inner Pinion Bearing Cup also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. For an original equipment Outer Pinion Bearing Cup and Cone Set, see QU40183 .

Also included in TK4855 and TK4843

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50407 Timken® Inner Pinion Bearing For Model 60 Front Axles for all 11998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU50407 Inner Pinion Bearing also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. For an original equipment Outer Pinion Bearing Cup and Cone Set, see QU40183
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Bearing & Seal Kits Featuring Genuine Timken® Bearings and Dana-Spicer Small Parts

top_page
photo
TK4855 Torque King® Premium Quality Front Differential Bearing and Seal Kit For your 1998-1999 Dodge Ram heavy-duty 4x4 truck features 100% Timken® Bearings and genuine Dana-Spicer Small Parts. TK4855 includes: QU50400 Outer Pinion BearingCup, QU50401 Outer Pinion Bearing, QU50406 Inner Pinion Bearing Cup, QU50407 Inner Pinion Bearing, 2 QU50397 Differential Bearing Cups, 2 QU50398 Differential Bearings, QU40356 Pinion Preload Spacer, QU40097 Pinion Seal, QU40099 Outer Pinion Slinger, QU40022 Pinion Nut, QU40023 Pinion Washer. Almost all parts USA Made, but some are imported.

Dan the Gear Man® Product Note: TK4855 Kit does NOT include QU40159 or QU40105 Axle Shaft Seals. Order those separately or as part of QK4620 Axle Shaft Seal Kit.

Please refer to TK4855 page for more details and ordering information.
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK4843 Torque King® Premium Quality Front Differential Master Service Kit For your 1998-1999 Dodge Ram heavy-duty 4x4 truck features 100% Timken® Bearings and genuine Dana-Spicer Small Parts. TK4843 includes: QU50400 Outer Pinion Bearing Cup, QU50401 Outer Pinion Bearing, QU50406 Inner Pinion Bearing Cup, QU50407 Inner Pinion Bearing, 2 QU50397 Differential Bearing Cups, 2 QU50398 Differential Bearings, QU40356 Pinion Preload Spacer, QU40365 Pinion Depth Shims, QU40206 Differential Shims, 12 QU40086 Ring Gear Bolts, QU40097 Pinion Seal, QU40099 Outer Pinion Slinger, QU40022 Pinion Nut, QU40023 Pinion Washer, QU40519 Lock Pin, QU40159 Left Axle Shaft Seal, QU40105, Right Axle Shaft Seal, QU90008 Gear Marking Compound, S82194 Ultra RTV Sealant, S24200 Threadlocker, and QT9404 Brush. Almost all parts USA Made, but some are imported.

Dan the Gear Man® Product Note: This Kit does not include QU40517 Side Gear Thrust Washers, or QU40518 Pinion Mate Gear Thrust Washers.

Please refer to TK4843 page for more details and ordering information.
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differentials and Differential Parts

top_page
product note

Differential problems with Model 60 front axles are not all that common. But Murphy, of Murphy's Law* really likes busted differentials, so when you hear that loud, heart-stopping, ominous BANG from the front axle as your 4x4 lurches to a grinding stop, you just KNOW it is one big dose of bad news. To help get you back on the road after you get rescued, we are stocking genuine original equipment Dana-Spicer Front Axle Differential Parts and Gear Sets for your hard working 3/4 ton Ram 2500 or 1 ton Ram 3500 4x4 truck.
*Murphy's Law: "Anything that can go wrong, will go wrong"

photo
QU40387 Differential Parts Kit For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40387 Differential Parts Kit also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Kit includes complete "Spider Gear" Set which has 2 small pinion mate gears and 2 large differential side gears*, plus 2 QU40517 side gear thrust washers and 2 QU40518 pinion mate thrust washers. Additional Kit components included are: 12 QU40086 ring gear bolts, QU40520 differential cross shaft, QU40519 cross shaft retaining pin, and QU40367 cover gasket. Genuine original equipment Dana-Spicer parts for your civilian Ram are Made in U.S.A. except pinion mate gears may be imported from Venezuela. *The 4 Internal Gears are NOT available individually
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40254 Bare Differential Case Kit Is a genuine Dana-Spicer Case for 4.10 and 3.54 ratio ring and pinion sets. Kit includes Differential Case, 12 QU40086 Ring Gear Bolts and QU40206 Differential Shim Kit. QU40254 fits all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40517 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU20271U Good Used Differential Case Dana Model 60 is a genuine Dana-Spicer part. QU20271U fits many Dana-Spicer Model 60 front or rear axles with open differentials and 4.30 or numerically lower gear ratios (ex: 3.54). Also fits some Model 61 axles
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40517 Differential Side Gear Thrust Washer For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 civilian 4x4 trucks. QU40517 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 civilian 4x4 trucks
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40518 Differential Pinion Mate Thrust Washer For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 civilian 4x4 trucks. QU40518 Differential Pinion Mat Thrust Washer also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 civilian 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40519 Lock Pin For Differential Cross Shaft for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 civilian 4x4 trucks. This Lock Pin also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 civilian 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40520 Differential Cross Shaft For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 civilian 4x4 trucks. QU40520 Differential Cross Shaft also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 civilian 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets and Gasket Maker

top_page
photo
QU40367 Rear Differential Cover Gasket For Model 70 Axles. These genuine Dana-Spicer gaskets will also work on your Dana 60 front axles if you wish to use a Gasket in lieu of RTV sealant. Made in U.S.A.

Dan the Gear Man® Tech Note: RTV sealant instead of Gaskets were used during the factory assembly of your axle.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes. The perfect choice to seal the differential cover on your Dodge Ram.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40090 Metal Reinforced Central Axle Disconnect Gasket For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40090 Gasket also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Also included in QK4511, QK4758 and QK4627

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hub Assemblies

top_page
product note

Unitized Front Wheel Bearing and Hub Assemblies for 1998 and 1999 Dodge Ram 4X4 trucks with the Dana-Spicer Model 60 front axle. This will include ALL 1998-1999 Ram 2500 and Ram 3500 4x4 trucks regardless of engine or vehicle weight rating. The front wheel bearings on 1998-1999 Dodge 4x4 3/4 and 1 ton 4x4 trucks are of unitized construction. They are not serviceable and no individual replacement parts are available for them. If your front wheel bearings are noisy or loose, you need to replace the hub and bearing assembly with one of these original equipment hub assemblies featuring Timken® Bearings and those all important studs. For 1998-1999 Dodge Ram 2500 and Ram 3500, there are a total of six front 4x4 hub choices depending upon the type of Anti-Lock Brakes (ABS), and if your truck has Single Rear Wheels(SRW) or Dual Rear Wheels (DRW). For 1998 and 1999 model year Dodge Ram 2500 and Dodge Ram 3500 4x4 trucks, the ABS sensor and tone ring are internally mounted in the hub. Since the sensor is specific to left and right sides, our hub selection for 1998 and 1999 has all six possible choices.
APPLICATIONS:
1998-1999 Front Hub Choices for 1998 & 1999 Dodge Ram 2500 and Dodge Ram 3500 with Single Rear Wheels:
Use QK4527 for either side on trucks with rear wheel ABS
Use QK4552 for the right side on trucks with 4-wheel ABS
Use QK4554 for the left side on trucks equipped with 4-wheel ABS
1998-1999 Front Hub Choices for 1998 & 1999 Dodge Ram Dodge Ram 3500 with Dual Rear Wheels:
Use QK4578 for either side on trucks with rear wheel ABS
Use QK4553 for the right side on trucks with 4-wheel ABS
Use QK4587 for the left side on trucks equipped with 4-wheel ABS

photo
QK4527 Non-ABS, SRW Front Hub Kit For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4527 also works on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 single rear wheel 4x4 trucks without 4-wheel ABS (See above). Kit includes: original equipment quality hub, 8 hardened wheel bolts, and installation chemical package. Made in U.S.A
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4552 Right ABS SRW Front Hub Assembly Kit Replaces the RIGHT front hub on all 1998 Dodge Ram 2500 and 1999 Dodge Ram 2500 4x4 trucks, also 1998 Dodge Ram 3500 and 1999 Dodge Ram 3500 single rear wheel 4x4 trucks with 4-wheel ABS (See above). Kit includes original equipment quality hub, 8 hardened wheel bolts, and installation chemical package. Made in U.S.A
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4554 Left ABS SRW Front Hub Assembly Kit Replaces the LEFT front hub on all 1998 Dodge Ram 2500 and 1999 Dodge Ram 2500 4x4 trucks also 1998 Dodge Ram 3500 and 1999 Dodge Ram 3500 single rear wheel 4x4 trucks with 4-wheel ABS (See above). Kit includes: original equipment quality hub, 8 hardened wheel bolts, and installation chemical package. Made in U.S.A
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4578 DRW Front Hub Kit For all 1998 Dodge Ram 3500 and 1999 Dodge Ram 3500 dual rear wheel 4x4 trucks without 4-wheel ABS (See above). Kit includes: original equipment quality hub, 8 hardened wheel bolts, and installation chemical package. Made in U.S.A
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4553 Right ABS DRW Front Hub Assembly Kit Replaces the RIGHT front hub on all 1998 Dodge Ram 3500 and 1999 Dodge Ram 3500 dual rear wheel 4x4 trucks with 4-wheel ABS (See above). Kit includes: original equipment quality hub, 8 hardened wheel bolts, and installation chemical package. Made in U.S.A.

More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4587 Left ABS DRW Front Hub Assembly Kit Replaces the LEFT front hub for all 1998 Dodge Ram 3500 and 1999 Dodge Ram 3500 dual rear wheel 4x4 trucks with 4-wheel ABS (See above). Kit includes: original equipment quality hub, 8 hardened wheel bolts, and installation chemical package. Made in U.S.A

Hub Kits, Performance Rebuildable by Dynatrac and Yukon

top_page
product note

Replace those troublesome and expensive factory unit hubs. Upgrade your big Ram 4x4 to have rebuildable Front Wheel Hubs with replaceable Timken® Tapered Wheel Bearings, and Fuel Saving Lock Out Hubs.  We stock Dynatrac Free-Spin™ and Yukon Spin Free® performance Serviceable Front Hub Kits for your Ram. Kits are available with your choice of Dynaloc™, Mile Marker®, Warn®, or Yukon® Lockout Hubs.  Want the ultimate Kit that has it all in one package? See Our Torque King Master Kits featuring a USA made Dynatrac Free-Spin™ Kit, 3 Hub Lock choices, premium Axle U-joints, Install Tools, and more!
Benefits of These Kits include:
Better Fuel Mileage
Reduced Wear and Tear on the front axle gears, front driveshaft, and transfer case
Easy to service and/or replace the popular, readily available, economical tapered front wheel bearings
Allow operation in 4x2 low range when hubs are unlocked for backing up trailers or other low speed maneuvering

photo

TK4900 Series Torque King® Master Front Serviceable Wheel Hub and Lockout Hub Kits with Dynatrac Free-Spin™ Kit, Axle U-Joints and Install Tools for 1998-1999 Dodge Ram 2500, Ram 3500 trucks with single rear wheels. TK4900 Series Kits include all the parts, special assembly tools, and extras needed to upgrade your heavy-duty Ram 4x4's front axle to low-cost serviceable wheel bearings and your choice of fuel-saving lockout hubs. The heart of all these comprehensive Kits are USA made Dynatrac Front Free-Spin™ Hub Kit PLUS, our comprehensive Master Kits ALSO include Spindle Nut Socket, Torque King® Factory Lubed Axle U-Joints, wheel seal tools, bearing packer, synthetic wheel bearing grease, threadlocker, and anti-seize compound. NOTE: The 1998-1999 Dynatrac Wheel Hubs and Axle Shafts are NOT compatible with trucks having 4 Wheel ABS (Anti-Lock Brake System). All Kits direct fit single rear wheel trucks. Will also fit dually models with optional wheel adapters, see More Info Tech Notes if you have a Dodge Ram 3500 with Dual Rear Wheels (DRW).

More Info 

photo

TK11200 Series Dynatrac Free-Spin™ Kits for 1998-1999 Dodge Ram 2500, Ram 3500 Dana 60 Front Axles TK11200 Series Kits include the conversion parts and your choice of fuel-saving lockout hubs to upgrade your heavy-duty Ram 4x4's front axle. Each Kit includes a complete, USA made Dynatrac Front Free-Spin™ Hub Kit with heat-treated chromoly spindles, spindle bearings, spindle seals, Timken® wheel bearings, Timken® or Dana wheel seals, 35-spline 1.50-inch chromoly outer shafts, 8 bolt wheel hubs, your choice of Hub Locks, double spindle nut kit, and instructions.  All Kits direct fit single rear wheel trucks. Will also fit dually models with optional wheel adapters, see More Info Tech Notes if you have a Dodge Ram 3500 with Dual Rear Wheels (DRW).

More Info 

photo

Y100010 Yukon Spin Free® Front Locking Hub Conversion Kit for 1998-1999 Dodge Ram 2500, Ram 3500 Single Rear Wheel 4x4s Y100010 Kit fits 1998-1999 Dodge Dana 60 front axles in Ram 2500, Ram 3500 4x4 with single rear wheels. The Yukon worry free, Spin Free® Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, low-profile Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. 

More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Manuals and Technical Service Bulletins

top_page
photo
TSB4515P Front Hub Replacement For all 1994 Dodge Ram 2500, 1995 Dodge Ram 2500, 1996 Dodge Ram 2500, and 1997 Dodge Ram 2500 4x4 trucks. TSB4515DL also applies to all 1994 Dodge Ram 3500, 1995 Dodge Ram 3500, 1996 Dodge Ram 3500 and 1997 Dodge Ram 3500 4x4 trucks. Includes detailed service procedures, tool recommendations, and Torque specifications, for 1994-1999 Dodge Ram 4x4 trucks with Dana-Spicer Model 60 front drive axles. 4 pages, 16 color photos
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TSB4620 Inner Axle Seal Replacement Fully illustrated 8 page Tech Service Bulletin with 31 color photos. Includes step by step service procedures, tool recommendations, and torque specifications for replacing those pesky front axle shaft seals on all 1994 to 1999 Dodge Ram 4x4 trucks with Dana-Spicer Model 60 front drive axles.

Please refer to TSB4620 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TM4400 Pinion and Differential Bearing Complete step by step, color illustrated guide for replacing differential and pinion bearings on all Dana-Spicer Model 30, 35, 44, 50, 60, 61, 70, 70HD, and 80 front or rear drive axles. 26 pages with over 75 color photographs.

Please refer to TM4400 page for more detail and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous Parts

top_page
photo
QU40114 Axle Shaft Nut Is a genuine original equipment replacement part. Also available in QK4732 Kit with the flat washer and cotter key.

Please refer to QK4732 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S24200 Blue Threadlocker
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90008 Gear Marking Compound
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Yokes

top_page
photo
QK4653 Front Pinion Yoke Kit Includes all the small parts to get you back on the road! QK4653 Model 60 for all 1998-1999 Dodge Ram 2500 4x4 trucks. QK4653 Pinion Yoke Kit also fits on all 1998-99 Dodge Ram 3500 4x4 trucks with Cummins & V10.

Please refer to QK4653 page for more details and ordering information.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11074 Front Pinion Yoke (No Slinger) for all 1998-1999 Dodge Ram 2500/3500 4x4 trucks with the Model 60 Front Axle.

Please refer to QU11074 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40747 Front Pinion Yoke For all 1998-1999 Dodge Ram 2500/3500 4x4 trucks with the Model 60 Front Axle.

Please refer to QU40747 page for more details and ordering information.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ring and Pinion Kits

top_page
product note

Unless your axle has run out of oil or it is severely abused, you will probably never have to replace your original ring and pinion set. However, if you do need one, we stock original equipment Dana-Spicer Gear Sets for your Ram's Model 60 front axle. These genuine gear sets are not cheap when compared to the host of knock off Asian import gear sets being pushed into the market place by vendors focused on getting the cheapest stuff they can. Well, like anything, you get what you pay for. I have been setting up Dana Gear Sets since the mid 1970's to date, and I have never had a setup problem with a genuine Dana-Spicer Gear Set. The same is not true for the aftermarket parts. Besides having sloppy machining, most aftermarket gears are not made to use the Dana factory set up tools, so a person usually has to apply some blood-boiling "Kentucky Windage" to the setup procedure to make progress.

photo

QU40378 Dana 60 3.55 Ring and Pinion Set for Dodge Ram Dana 60 Is 100% genuine original equipment parts including: a 3.55:1 matched ring and pinion set, inner pinion bearing and cup, outer pinion bearing and cup, pinion slingers, pinion preload spacer (crush sleeve), pinion depth shims, differential shims, pinion seal, pinion nut, and ring gear bolts.  

Link to QU40378 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40492 Dana 60 4.10 Ring and Pinion Set for Dodge Ram Dana 60 Is 100% genuine original equipment parts including: a 4.10:1 matched ring and pinion set, inner pinion bearing and cup, outer pinion bearing and cup, pinion slingers, pinion preload spacer (crush sleeve), pinion depth shims, differential shims, pinion seal, pinion nut, and ring gear bolts. Made in U.S.A. Order QU40105 Right Axle seal, QU40159 Left Axle Shaft Seal, and QU40184 Differential Bearing Set separately
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Seals and Seal Kits

top_page
photo

QK4620 Inner Axle Seal Kit for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4620 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Uses NOK brand seals which were original equipment from 1998 to early 1999. Precision Machined Installers to allow adjustment of seal depth for worn inner axles.

Please refer to QK4620 page for more details and ordering information.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TS4620 Inner Axle Seal Tool Set For al 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. TS4620 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks with Central Axle Disconnect (CAD). Makes seal installation easy and almost fool-proof. Complete kit Include 2 seal installers, 150, 000 psi tensile strength alloy steel threaded rod with Grade 8 hardware, and rod guide. Our CNC Precision Machined Installers support these difficult to install seals in 3 locations and are machined out of solid steel. Made in Montana, U.S.A.

Please refer to TS4620 page for more details and ordering information.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4631 Inner Axle Seal Kit For Right Side only fits all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4631 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Uses NOK brand seals which were original equipment from 1998 to early 1999. CNC Precision Machined Installers to allow adjustment of seal depth for worn inner axles.

Please refer to QK4620 page for more details and ordering information.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TS4631 Inner Axle Seal Tool Set For Right Side only on all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. TS4631 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks with Central Axle Disconnect (CAD). Makes seal installation easy and almost fool-proof. Made in Montana, U.S.A.

Please refer to TS4620 page for more details and ordering information.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4698 Inner Axle Seal Kit with Depth Stop for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4698 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks same as QK4620 only with CNC Precision Machined Depth Controlled Seal Installers that stop at the original precise depths on Ram 2500 and 3500 4x4 trucks (not recommended for 1500 models)

Please refer to QK4698 page for more details and ordering information.

photo
TS4698 Inner Axle Seal Tool Set with Depth Stop for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. TS4698 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks same as TS4620 only with CNC Precision Machined Depth Controlled Seal Installers that stop at the original precise depths on Ram 2500 and 3500 4x4 trucks (not recommended for 1500 models)

Please refer to TS4698 page for more details and ordering information.

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4699 Inner Axle Seal Kit for Right Side Only with Depth Stop For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QK4699 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks same as QK4631 only with CNC Precision Machined Depth Controlled Seal Installer that stops at the original precise depth on Ram 2500 and 3500 4x4 truck (not recommended for 1500 models)

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TS4699 Inner Axle Seal Tool Set Right Side Only with Depth Stop for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. TS4698 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks same as TS4620 only with CNC Precision Machined Depth Controlled Seal Installer that stops at the original precise depth on Ram 2500 and 3500 4x4 trucks (not recommended for 1500 models)
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40159 Left Axle Shaft Seal A genuine original equipment NOK brand seal used as the LEFT Axle Seal on all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40159 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Due to the restricted area where these seals press into, it is recommended you use QT1029 Seal Installer (Included in QK4620 Tool Sets) for a trouble and leak free installation.

Dan the Gear Man® Tech Note: Complete axle tear down including Differential removal is required to change this seal.

Please refer to QU40159 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40105 Right Axle Shaft Seal QU40105 Right Axle Shaft Seal is a genuine original equipment NOK brand seal used for the Right Axle Seal on all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40105 also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. Due to the restricted area where these seals press into, it is recommended you use QT1002 Seal Installer (Included in QK4620 Tool Sets) for a trouble and leak free installation.

Dan the Gear Man® Tech Note: Differential removal is NOT required to change your QU40105 Right Axle Shaft Seal as it is located in the right axle tube just to the right of the rectangular CAD opening.

Please refer to QU40105 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40097 Pinion Seal

Also included in TK4855 and TK4843

Please refer to QU40097 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo
QU10614 Hub-to-Knuckle Bolt For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU10614 Hub-to-Knuckle Bolt also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks with the Model 60 front axle. Special, hardened, 12 point, metric, flange head bolt is used to secure the wheel hub to the steering knuckle. Need all 4 for one side? Order QK4749 above
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40343 Hardened Differential Cap Retaining Bolt Genuine original equipment hex-head bolt for Dana 60 front axles is for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40343 Differential Cap Retaining Bolt also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Please refer to QU40343 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40022 Pinion Nut For all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QU40022 Pinion Nut also fits on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks. QU40022 is a genuine original equipment, self-locking nut, intended for a single use part, discard and replace with a new nut any time you remove the pinion nut.

Also included in TK4855 and TK4843

Please refer to QU40022 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40023 Pinion Washer for Dodge Ram Is a genuine original equipment flat washer goes between the pinion nut and pinion yoke.

Also included in TK4855 and TK4843

Please refer to QU40023 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40356 Pinion Preload Spacer (Crush Sleeve) for Dodge Ram Genuine original equipment spacer is is critical for setting your pinion rotating torque. Designed as a use once and throw away part.

Please refer to QU40356 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40365 Pinion Depth Shim Kit Is a genuine original equipment Kit.

Also included in TK4843

Please refer to QU40365 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40206 Differential Bearing Shim Kit Includes a selection of genuine original equipment Shims for adjusting backlash and differential bearing preload.

Also included in TK4843 and QU40254

Please refer to QU40206 page for more details and ordering information.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40099 Outer Pinion Slinger Fits between the outer Pinion Bearing and Pinion Yoke

Also included in TK4855 and TK4843

Please refer to QU40099 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40086 Ring Gear Bolt For Dana 60 or Dana 70. Genuine Dana-Spicer Grade 9 Bolt has locking teeth under the hex head to prevent loosening under any load conditions.

Also included in TK4843 and QU40254

Please refer to QU40086 page for more details and ordering information.

Dan the Gear Man® Safety Note: Ring Gear Bolts are designed for a single use. They must be replaced after they are removed!

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
photo
QT1002 Seal Installer For the right side inner axle seal located next to the CAD unit. Part of QK4620 / QK4631 and TS4620 /TS4631 Installation Kits. Essential for installing your right side seal without damage.

Please refer to QT1002 page for more details and ordering information.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1029 Seal Installer For the left side inner axle seal located next to the differential. Part of QK4620 and TS4620 Installation Kits. Essential for easy and trouble free installation of your left axle shaft seal.

Please refer to QT1029 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1047 Axle End Plate Is made to fit 1994-2001 Dodge Axles with 2-1/8" Axle Tube inside diameters. 5/8" ID center hole. Part of QK4620 /QK4631QK4698 /QK4699TS4620 /TS4631 and TS4698 /TS4699 Installation Kits.

Please refer to QT1047 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1048 18" Pull Rod

Please refer to QT1048 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1136 SEAL INSTALLER, DEPTH STOP Part of QK4698 and TS4698 Installation Kit.

Please refer to QT1136 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1190 SEAL INSTALLER, DEPTH STOP Part of QK4698/QK4699 and TS4698/TS4699 Installation Kit.

Please refer to QT1190 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TS1184 Inner Axle Seal Remover Set Is used to drive the inner axle seals out of the axle housing bores on all 1994-1997 Dodge Ram 2500 and Ram 3500 4x4 front axles. Set includes QT1145 Driver Handle and QT1214 Seal Remover
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TS4511 7 Piece Ball Joint Tool Kit Is the easiest and safest way to remove and install ball joints for all 1998 to 1999 Dodge Ram 2500 and Dodge Ram 3500 4x4 trucks. Specifically designed to make the task of changing the ball joints on your 1998-1999 Dodge RAM truck easy and safe! Kit includes QT1065M C-Frame Press and 6 USA made steel adapters. Optional tooling is available for other applications
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1219 Case Spreader Is used to relieve the differential bearing preload making it easy to safely remove and install your front differential without damaging expensive critical parts. This Differential Case Spreader is for Models 25, 27, 30, 44, 50, 60, 70, 70HD, and 80
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1072 Hub Puller Is used to remove the front wheel hubs for all 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks. QT1072 also works on all 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks.

Please refer to QT1072 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1200 Tie Rod Separator Allows you to remove the separate tie rod and drag link ends without wrecking the seals or screwing up your steering linkage ends. Works on 1998 Dodge Ram 2500, and 1999 Dodge Ram 2500 4x4 trucks and 1998 Dodge Ram 3500, and 1999 Dodge Ram 3500 4x4 trucks with the original metal-topped sandwich seal, but on these trucks it will be hard to get the jaws into place due to the lack of flexibility in the original seals.

Please refer to QT1200 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT9018 5 Pound Dead Blow Hammer Is just about the first tool you will reach for for a multitude of jobs on your Dodge Ram. From seating differentials to removing rusted on wheels, the ability to apply persuasive force without damaging the reluctant part will make you wonder how you ever lived without this essential tool.

Please refer to QT9018 page for more details and ordering information.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT9302 5 Pound Slide Hammer A first-class tool for pulling just about anything you can get a matching 5/8" fine thread puller for.

Please refer to QT9302 page for more details and ordering information.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1008 Axle Shaft Nut Socket 1/2" drive U.S.A. made impact socket fits the odd-ball sized nuts (QU40114 ) threaded on the ends of your outer axle shafts.

Please refer to QT1008 page for more details and ordering information.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1027 Impact Socket 1/2" drive socket for removing the 12 point QU10614 hub to knuckle bolts.

Please refer to QT1027 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1103 Driver Is used in conjunction with QT1027 and a hammer to drive your wheel hub assembly from the steering knuckle.

Please refer to QT1103 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT9216 Special Hex Driver 3/8" Is used to remove the caliper support bolts.

Please refer to QT9216 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1098 Master Bearings Slip on your differential in place of the taper bearings and cups. Used along with a dial indicator to determine the correct differential shim thickness.

Please refer to QT1098 page for more details and ordering information.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT9404 Brush

Please order your QT9404 Brush from our QT9404 Web Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT2005 Inner Pinion Bearing Installer Is used to quickly and easily seat your OU50407 Inner Pinion Bearing on the pinion
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1805 Inner Pinion Bearing Cup Installer Attaches to one of our QT1100 Series Driver Handles. Our precision CNC machined steel Installer is makes installing your QU50406 Inner Pinion Bearing Cup a simple and fast procedure
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1812 Outer Pinion Bearing Cup Installer Installer attaches to one of our QT1100 Series Driver Handles. Our precision CNC machined steel Installer is makes installing your QU50400 Outer Pinion Bearing Cup a simple and fast procedure
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1088 Differential Step Plate Fits either side of the differential and is used to support the differential when installing your differential bearings or it acts as a push plate when you use a puller to remove the old bearings
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1158 Differential Bearing Installer Makes a hard job easy. The raised inside ridge matches against inner differential bearing race allowing you to easily press or drive on QU50398 differential bearing until the bearing is fully seated against the differential adjusting shims
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT1100 Series Driver Handles Are used in conjunction with our seal and bearing cup installers
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!