Parts for 1988 to 1993 Dodge Ram Trucks with New Process NP241D Transfer Cases

Bearing, Seal, and Gasket Kits

top_page

QU50129 Bearing, Seal, and Gasket Kit for New Process NP241D transfer cases in 1988-1993 Dodge W150, W250, Ramcharger, and Plymouth Trailduster. More Info

$147.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
photo

QU40729 U-Joint Strap and Bolt Kit For Dodge 7260 Universal Joint. This Strap and Bolt Kit is used to secure Dodge (Detroit Universal) 7260 series universal joints with 1.078" diameter cups to Dodge NP241D transfer case rear output yokes. More Info

$7.15
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Oil Pump and Oil Pump Pickup Parts

top_page
photo

QU10984 Oil Pump Screen for 1988-1993 New Process NP241D Transfer Cases Is a genuine NPG original equipment part for NP241D chain drive transfer cases with passenger side front output shafts in 1988-1993 Dodge GMC 4x4s. Your Oil Screen is located in the bottom of the case just above the chip magnet. The plastic screen filters out chips and crud from the oil before it gets to the pump. More Info

$16.60
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10673 Dodge NP241 Transfer Case Oil Pump Pickup Connector Hose Connects the QU10674 Oil Pickup Filter Screen to the Oil Pump Feed Tube on your NP241DTransfer Case. This genuine New Process Hose has the correct flexibility and oil resistance needed for long life. More Info
Dan the Gear Man® Tech Note: If you don't want to risk burning your Transfer Case up, don't replace this little guy with inexpensive fuel line hose or similar products. You risk a cracked hose which will lead to oil pump and mainshaft failure.

$3.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10802 Dodge New Process NP241D Transfer Case Oil Pump Feed Tube to Oil Pump O-Ring Seals the connection between your QU50423 oil pump and the Oil Pump Feed Tube. More Info

$1.60
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50423 Dodge NP241D Transfer Case Oil Pump More Info

$44.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10972 Aftermarket NP241 Oil Pump More Info

$45.83
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Output Shafts

top_page
photo

QU51108 Rear Output Shaft for 1988-1993 Dodge New Process NP241D Transfer Cases. More Info

$125.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Output Yokes and Flanges

top_page
photo

QU10935 Genuine NPG Balanced CV Flange Is the USA made factory replacement for original front output CV flange used in 1988-1993 full size Dodge 4x4 trucks with NP241D Transfer Cases. Includes slinger. More Info

$209.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11072 7260 Series Rear Output Yoke for 1988-1993 Dodge NP241D Transfer Cases Is an aftermarket replacement Rear Output Yoke requiring a special seal for all 1988-1993 NP241D New Process chain drive transfer cases with a rear outpu yoke having an inside yoke span of 2-1/8" in Dodge Ramcharger, W150, W250, and Plymouth Trailduster 4x4 vehicles. More Info

$121.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK2009 Rear Output Yoke Kit for 1980-1993 Dodge NP241D Transfer Cases is a replacement Rear Output Yoke Kit for all 1988-1993 NP241D New Process chain drive transfer cases in Dodge Ramcharger, W150, W250, and Plymouth Trailduster 4x4 vehicles. Kit includes yoke, conversion u-joint, u-bolt kit, spline seal, output seal, and nut. More Info

$129.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Seals

top_page
photo

QU50102 Transfer Case Rear Output Seal fits a number of New Process chain drive transfer cases with rear output yokes having a ground hub diameter of 2-1/8". More Info

$15.96
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Shift Parts

top_page
photo

QU10987 Range Fork Rail Bushing Are genuine New Process original equipment parts for 1980's to early 1990's New Process NP231 and NP241 Transfer Cases. QU10987 fits 1988-1993 Dodge NP231D (Dakota) and NP241D (W150, W250) transfer cases. More Info

$4.95
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo

QU10512 Front Output Flange Nut for New Process transfer cases with 7/8" extra fine thread output shafts. More Info

$7.06
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Speedometer Parts

top_page
photo

QU10923 Speedometer Drive Gear Is a genuine original equipment New Process plastic gear for 1988-1993 Dodge NP241D transfer cases. More Info

$11.70
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10678 O-Ring, Speedometer Output. This o-ring seals between the 2" speedometer output carrier and the tailshaft housing on all 1988-1993 Dodge NP241D Transfer Cases. More Info

$2.53
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10873 Speedometer Retaining Snap Ring For all 1988-1993 Dodge NP241D Transfer Cases. More Info

$4.49
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10979 NP241D Transfer Case Synchronizer Strut Tension Spring Two of these springs are used in 1988-1993 synchronized NP241D transfer cases to apply tension to the three QU10821 Synchro struts or keys. More Info

$7.95
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!