NV271D Transfer Case Parts for 2003-up Dodge Ram 2500, 3500, 4500, 5500 4x4 Trucks

We stock a complete line of original equipment replacement parts for the Dodge New Process/New Venture NV271D Transfer Case. Introduced as the stock Transfer Case for the 2003 Dodge Ram 2500 and Ram 3500 trucks, the NV271D Manual Shift Transfer Case has proven to be a reasonably reliable unit. The NV271D is a manual shift, chain drive transfer case with a 2.72:1 planetary driven low range and aluminum case castings. It was built at the New Process plant in East Syracuse New York until production was switched to Mexico in 2010-2011.

The Dodge version of the NV271 transfer case shares a number of common components with the Ford NV271F transfer case, but the Ford and Dodge versions are not interchangeable... (Continued at Bottom of Page)

Case Identification

top_page
product note

The manual shift transfer case option for all 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012.5 Ram 4500, Ram 5500 4x4 trucks is a NV271D. When Dodge first started using the NV271D, it was built at the Chrysler owned New Process Gear Plant (NPG) in East Syracuse, New York which was then operated by New Venture Gear (NVG) a joint venture controlled by Chrysler and General Motors. (The model designation NV271D was shorthand for New Venture 271 Dodge.) The case castings usually had the New Venture Logo, but the assembly tag had the New Process Name. When NVG dissolved a short time later, Chyrsler continued building the NV271D at the New Process factory. After a couple of years, Chrysler sold the New Process production rights to Canada's Magna Corporation. Under Magna, NV271D transfer cases were still built at the NPG plant until 2010 to 2011 when Magna phased out the NPG factory and moved transfer case production to Mexico. The important thing to know is despite all these name changes and plant relocations, most of the parts in a 2003 NV271D are pretty much the same as a 2012 NV271D if they have the same base assembly number.

photo

For parts identification purposes, a Round Tag is affixed to the back of the rear case. Stamped on the tag are the Model Number (NV271D), Assembly Number (8 digit number plus two letters), Transfer Case Build Date, and Low Range Ratio (2.72). In most cases, parts identification is pretty straight forward with the year and assembly number, but there are times we may need additional information such as the Vehicle Identification Number (VIN), engine, transmission, transfer case build date, or truck model. Transfer Cases built in the U.S. have the NPG Logo and the legend New Process Gear Syracuse, New York in red plus wording to identify what each number signifies. The few Mexican built cases we have seen have the stamped numbers but no other identification.

photo

There is also a factory applied Decal usually located on top of the front case. The Decal has a Bar Code, serial number, Dodge assembly part number, and New Process assembly part number. As often as not, the Decal is long gone or illegible by the time the transfer case needs service, but if the Round Tag is missing, look for this decal.

Our available Brand New New Venture NV271D Manual Shift Transfer Cases are listed in our quad4x4.com Webstore under:
Dodge>>Dodge Transfer Case>>2003-2012 Dodge NV271D Transfer Case>>03-12 NV271D Case Parts, Assemblies

Bearing and Master Overhaul Kits

top_page
product note

We offer a good quality aftermarket Bearing and Seal Kit plus a range of premium, original equipment quality Torque King® Bearing and Master Overhaul Kits for your Dodge NV271D Manual Shift Transfer Case. Torque King® Kits are assembled with 1st class quality parts here in Montana specifically for the Dodge versions of NV271D Manual Shift Transfer Cases. (There are no Chinese Knockoff parts in Torque King® Kits!)
Basic Kits include all the Bearings and and Shaft Seals but no O-Rings or small parts.
Complete Kits include all the Bearings, Shaft Seals, O-Rings, Planetary Thrust Washers, and Shift Fork Pads.
Master Overhaul Kits include everything in a Complete Kit PLUS Snap Rings, Oil Pump Pickup, Drive Chain, Shift Linkage Bushings, and Output Nuts

photo

TK2102/TK2115 Torque King® Premium Quality Basic Bearing and Seal Kit for 2003-current Dodge NV271D Manual Shift Transfer Cases includes all the Input/Output Bearings and Seals. More Info for both Kits

photo

TK2103/TK2105 Torque King® Premium Quality Complete Bearing and Seal Kit For 2003-current Dodge NV271D Manual Shift Transfer Cases includes all the Bearings, Shaft Seals, O-rings, Planetary Trust Washers, and Shift Fork Pads. More info for both Kits

photo

TK2104/TK2106 Torque King® Premium Quality Master Overhaul Kit for 2003-2012 Dodge NV271D Manual Shift Transfer Cases includes all the Bearings, Shaft Seals, O-rings, Planetary Trust Washers, Shift Fork Pads, Snap Rings, Oil Pump Pickup, Drive Chain, and Front Output Shaft Locknut. More Info for both Kits

photo

TKA2162 Primary Bearing Kit for 2005-2012 Dodge New Venture/New Process NV/NP271 Transfer Cases having fixed yoke rear output shafts. Includes input and output shaft bearings. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TKA2160 Primary Bearing and Output Bushing Kit for 2003-2012 Dodge New Venture NV271D transfer cases having slip type rear output shaft. Includes input and output shaft bearings and output shaft bushing. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Bearings

top_page
product note

All Dodge New Process/New Venture NV271D manual shift transfer cases use the same bearings except for the input and output needle bearings used on fixed rear output applications. Wear and failure issues with the Ball Bearings are usually related to hard use or more likely from lubrication problems (old, dirty, low, or wrong oil). I have seen a surprising amount of needle bearing issues, especially with the front output, rear bearing. Lubrication problems are certainly part of it, but I suspect the constant rotation of the Dodge Ram front output shaft in both 4x2 and 4x4 modes is the primary cause as Ford 4x4s with lockout hubs and NV271F transfer cases don't seem to have near the wear issues on the front output shaft and needle bearing.

photo

QU10904 NV271D Single Row Input Gear Needle Roller Pilot Bearing Is a drawn cup type (enclosed on one end) needle bearing with one row of needle bearings that gets pressed into the back of your Input Shaft to support the front of the Rear Output (Main) Shaft. Fits NV271D Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 4x4 trucks with slip yoke type rear output shafts. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20215 Rear Output Shaft Needle Roller Bearing for 2007-2012 Fixed Rear Yoke NV271D Transfer Cases Fits in the Rear Extension Housing on 2007-2012 NV271D Transfer Cases with a fixed, round rear output flange. This part is NOT used on models with Slip Yoke Type Rear output shafts! More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10906 NV271D Front Output Shaft Front Ball Bearing For all NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50502 NV271D Front Output, Rear Needle Roller Bearing for 2003-up Dodge New Process NV271D Manual Shift Transfer Cases is an original equipment style caged needle roller bearing that gets pressed in the bearing pocket machined in the rear transfer case half. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU30176 NV271D Double Row Input Gear Needle Roller Pilot Bearing Is a drawn cup type (enclosed on one end) needle bearing with two rows of needle bearings that gets pressed into the back of your Input Shaft to support the front of the Rear Output (Main) Shaft. Fits NV271D Transfer Cases in 2007-2012 Dodge Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 Chassis Cab 4x4 trucks with fixed, round rear output flanges. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50668 NV271D Shift Support Bearing Two of these small Needle Bearings are located in QU50675 (2003) or QU10974 (2004-2012) Shift Support. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50249 NV271D Rear Output Shaft Ball Bearing For all NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10879 Heavy-Duty, Max Capacity, Front Output Rear Bearing For many New Process and New Venture chain drive transfer cases. This max capacity, needle roller bearing has over 30% more needle rollers than the original equipment type QU50502 bearing which helps minimize deflection of the front output shaft under extreme loads. This bearing gets pressed in the front output bearing bore machined in the rear transfer case half. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50250 NV271D Input Shaft Ball Bearing For all NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Bushings

top_page
product note

The vast majority of Dodge New Process/New Venture NV271D Transfer Cases have a Slip Joint type rear output shaft in which a female spline driveshaft slip yoke fits over the male spline transfer case rear output shaft. The slip yoke is supported inside the transfer case extension housing by QU50261 Bushing. The Bushing should be replaced when you perform major service on the transfer case or when you experience repeated rear output seal failures.

photo

QU50261 Rear Output Bushing For all 2003-up Dodge New Process NV271D Manual Shift Transfer Cases with Slip Yoke Type Rear Output Shafts. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Case Parts and Case Assemblies

top_page
product note

The major cause of broken Transfer Case castings is accidents. A good front end hit can push the driveshaft backwards breaking one or both case halves. Other common causes are running the transfer case out of oil, rock hits/high centering, excessive driveshaft angles (from Lift kits), and operating a case with a badly worn chain. At this time we have the case parts, but no assemblies.

photo

QU11014 Front Transfer Case Half For 2003-up Dodge New Process NV271D Manual Shift Transfer Cases with casting number 09104. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11015D Rear Transfer Case Half For 2003-up Dodge New Process NV271D Manual Shift Transfer Cases with casting numbers 24278 or 46901. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11013 Slip Yoke Type Dodge NV271D Rear Transfer Case Extension Housing For 2003-up Dodge New Process NV271D Manual Shift Transfer Cases with slip yoke rear output. Includes factory installed QU50261 Rear Bushing and QU10930 Booted Rear Output Seal. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11082D Fixed Yoke Type Rear Extension Housing for Fixed Rear Output For 2007-up Dodge New Process NV271D Manual Shift Transfer Cases with round, fixed type rear output flange. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10104 Vent and Hose Assembly The plastic vent itself will fit any 5/16" hose and is commonly used as an axle vent breather. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11092 Front Case Vent Breather Fitting For 2003-up Dodge New Process NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11019 Transfer Case Mounting Stud For 2003-up Dodge New Process NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10535 Transfer Case Mounting Nut For 2003-up Dodge New Process NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11030 52853060AE 23 Spline New Venture NV271D Manual Shift Transfer Case Assembly for 2003-2012 Dodge Ram. This is a BRAND NEW, complete New Venture NV271D manual shift transfer case with 2 position shift indicator switch for Ram 2500 and Ram 3500 trucks with 23 spline output automatic transmissions. Slip yoke style rear output. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11031 52853061AE 29 Spline New Venture NV271D Manual Shift Transfer Case Assembly For 2003-2012 Dodge Ram. This is a BRAND NEW, complete New Venture NV271D manual shift transfer case with 2 position shift indicator switch for Ram 2500 and Ram 3500 trucks with either manual transmissions or 29 spline output automatics. Slip yoke style rear output. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11150 52105646AF 23 Spline New Venture NV271D Manual Shift Transfer Case Assembly For 2003-2012 Dodge Ram. This is a BRAND NEW, complete New Venture NV271D manual shift transfer case with a 5 position shift indicator switch for Ram 2500 and Ram 3500 trucks with 23 spline output automatic transmissions. Slip yoke style rear output. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11151 52105649AF 29 Spline New Venture NV271D Manual Shift Transfer Case Assembly For 2003-2012 Dodge Ram. This is a BRAND NEW, complete New Venture NV271D manual shift transfer case with a 5 position shift indicator switch for Ram 2500 and Ram 3500 trucks with either manual transmissions or 29 spline output automatics. Slip yoke style rear output. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11158 52123155AA 29 Spline New Venture NV271D Manual Shift Transfer Case Assembly For 2007-2012 Dodge Ram Chassis Cab trucks. This is a BRAND NEW, complete New Venture NV271D manual shift transfer case with multi-position shift indicator switch for Ram 3500, Ram 4500, and Ram 5500 4x4 trucks with either manual transmissions or 29 spline output automatics. Fixed flange yoke style rear output. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Drive Chain and Sprockets

top_page
product note

Dodge does not offer a lockout hub option on 2003 and newer Dodge Ram 2500, Ram 3500, Ram 4500, and Ram 5500 4x4 trucks, so even in 4x2 mode, the front axle shafts, differential, front driveshaft, transfer case front output shaft and the transfer case chain/sprockets are always rotating when you drive even though they are not under power. Besides sucking a bit of power and fuel, all these rotating components are subject to wear. You should replace the chain when doing major transfer case service, plus you should inspect the sprockets for wear on the teeth. If you can feel teeth wear with your fingernail REPLACE BOTH the SPROCKETS and CHAIN!

photo

QU50255 NV271D Transfer Case Drive Chain Is a genuine original equipment Morse® Transfer Case Drive Chain for 2003-up Dodge Ram NP271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10993 NV271D Chain Sprocket Is a genuine original equipment Sprocket that will fit either the Mainshaft or Front Output Shaft in all NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10994 One Piece Combination Sprocket Carrier and Mode Clutch Is a genuine original equipment part that Slides over the Rear Output (Main Shaft) and supports your Drive Sprocket. QU10994 is an exact replacement part for later production Transfer Cases AND is the updated replacement part for early production NV271D Transfer Cases that originally used QU11084 Sprocket Carrier and QU11085 Mode Clutch. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11084 NV271D Sprocket Carrier Is a genuine New Process part for early production NV271D Transfer Cases. Used in conjunction with QU11085 Mode Clutch Gear. If you need both the Sprocket Carrier and Mode Clutch, order QU10994 and one QU10902 Snap Ring. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11085 NV271D Mode Clutch Gear Is a genuine New Process part for early production NV271D Transfer Cases. Used in conjunction with QU11084 Sprocket Carrier. If you need both the Sprocket Carrier and Mode Clutch, order QU10994. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Input Shafts

top_page
product note

Dodge has used three Input Shafts in New Process NV271D Transfer Cases. A 23 spline input shaft is used in most behind automatic transmissions. Trucks with manual transmissions and heavy-duty automatics like the Aisin 6 speed have one of two 29 spline input shafts.

photo

QU10995 NV271D 23 Spline Input Shaft Is a genuine original equipment Input Shaft for 2003-2012 Dodge Ram 2500, Ram 3500 4x4 trucks with Chrysler 23 spline output automatic transmissions (Does NOT Fit 2007-up Diesel with Aisin 6 Speed). More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10990 1st Design NV271D 29 Spline Input Shaft Is a genuine original equipment Input Shaft for most 2003-2012 Dodge Ram 2500, Ram 3500 4x4 trucks with Manual Transmissions and some 2007-up Automatics. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11083 2nd Design NV271D 29 Spline Input Shaft Is a genuine original equipment Input Shaft for some 2006-2012 Dodge Ram 2500, Ram 3500, Ram 4500, Ram 5500 4x4 trucks with Manual Transmissions or 2007-up models with Aisin automatic transmissions. QU11083 has QU30176 double row Pilot Bearing and it is only used on transfer cases with fixed rear output shafts. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
product note

Replacing damaged or worn small parts is often the difference between a first class, long-term repair and a short lived nightmare. In this section are the small parts and accessory items that do not neatly fit under our other parts headings.

photo

QU11102 Grade 5 Front Driveshaft Bolt with Attached Washer Four of Bolts are needed to attach the front CV driveshaft to the transfer case. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90005 RTV Sealant For sealing between the mating flanges of all the case castings. Except for the QU10950 Shift Support Shim Gasket, there are no conventional gaskets used on the NV271D, all case sealing is done with RTV sealant. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Oil Pumps and Oil Pump Pickup Parts

top_page
product note

Dodge New Process and New Venture NV271D Transfer Cases all use the same Oil Pump. Your NV271D Manual Shift Transfer Case will have one of two types of interchangeable Oil Pickup Assemblies. Factory assembled, early production models will have a five piece pickup assembly. Later model cases have a one piece, unitized assembly. If you have the early, 5 piece design, we still have the component parts for it, but I recommend you replace all 5 pieces with QU10973 One Piece Pickup for the simple reason it's unitized construction means it is less likely to fail.

photo

QU10997 NV271D Oil Pump with Seal For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10973 Unitized Oil Pump Pickup Assembly Is both the exact original equipment replacement pickup for later production transfer cases AND the one piece service replacement for all 5 components of the early production Oil Pickup Assembly. For early production models, QU10973 replaces all these parts: QU10674, QU10673, QU50670, QU10911, and QU50671. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10674 Oil Pump Screen For early production Dodge NV271D Transfer Cases with the 5 piece oil inlet pickup assembly. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10673 Short Oil Pump Pickup Connector Is used to couple QU10674 Filter to QU50670 long steel pickup tube on early production Dodge NV271D Transfer Cases with the 5 piece oil inlet pickup assembly. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50670 Long Steel Oil Pump Pickup Tube Is the middle section the 5 piece oil inlet pickup assembly used on early production transfer cases. More Info

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10911 Long Oil Pump Pickup Connector For early production Dodge NV271D Transfer Case with the 5 piece oil inlet pickup assembly is used to couple QU50670 Long Steel Pickup Tube to QU50671 Oil Pump Connector Nipple. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50671 Oil Pump Connector Nipple Fits into the oil pump. QU50671 is the last part of the the 5 piece oil inlet pickup assembly used on early production Dodge NV271D transfer cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50177 Genuine New Process Oil Pump Seal For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10802 Oil Pump Inlet O-Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Output Flanges and Yokes

top_page
product note

Dodge uses the same Front CV Output Flange for all NV271D Transfer Cases. Rear output Yokes are a different story. Most, but not all NV271D Transfer Cases have a Slip Yoke type rear output. You need to know both the U-Joint size and length of your original yoke to order a replacement part. Some NV271D Transfer Cases have a Fixed Yoke Rear Output. At this time we do not have the round rear Flange Yokes in stock.

photo

QU11012 Front Output Flange Yoke For all 2003 and Newer Dodge Ram 4x4s with NV271D Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50430 Long 1415 Series Dodge Ram New Venture NV271D 4x4 Plated Rear Driveshaft Slip Yoke without Vibration Dampener For 2003 to current Dodge Ram 2500 and Dodge Ram 3500 New Venture NV271D transfer cases and AAM 1415 series u-joints having 1-3/16" diameter cups. Length from center of u-joint hole to end of spline is 9-9/16". More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50431 Long 1415 Series Dodge Ram New Venture NV271D 4x4 Rear Driveshaft Slip Yoke without Vibration Dampener For 2003 to current Dodge Ram 2500 and Dodge Ram 3500 New Venture NV271D transfer cases and AAM 1415 series u-joints having 1-3/16" diameter cups. Length from center of u-joint hole to end of spline is 9-9/16". More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50752 Long 1415 Series Dodge Ram New Venture NV271D, NV273D 4x4 Rear Driveshaft Slip Yoke with Vibration Dampener For 2003 to current Dodge Ram 2500 and Dodge Ram 3500 New Venture NV271D or NV273D transfer cases and AAM 1415 series u-joints having 1-3/16" diameter cups. Length from center of u-joint hole to end of spline is 9-9/16". More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50441 1485 Series Dodge Ram New Venture NV271D 4x4 Rear Driveshaft Slip Yoke without Vibration Dampener For 2003 to current Dodge Ram 2500 and Dodge Ram 3500 New Venture NV271D transfer cases and AAM 1485 series u-joints having 1-3/8" diameter cups. Length from center of u-joint hole to end of spline is 9-9/16". More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Output Shafts and Output Shaft Nuts

top_page
product note

The diameter of the NV271D Rear Output Shaft is considerably larger than any previous Rear Output Shaft used on Dodge 4x4 Transfer Cases. Two types of Rear Output Shaft are offered. Most trucks will have a Slip Yoke Type Rear Output, but some, mainly heavy-duty chassis cab models will have a fixed yoke type rear output. Front output shafts were built in an early and late version. While they are interchangeable if you also replace the sprocket snap ring, I feel the 2003-2004 Front Output Shaft is preferred for competition or really heavy-duty use, due to the full length spline and the early Sprocket Snap Ring is significantly thicker than the one used with the later shaft.

photo

QU10996 NP271D Slip Yoke Style Rear Output Shaft For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 4x4 trucks with Slip Yoke type Rear Output Shafts. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20295 Rear Output or Mainshaft for 2007-2012 Dodge Ram 3500, Ram 4500, and Ram 5500 Cab and Chassis 4x4 trucks with NV271D Manual Shift Transfer Cases. More Info and QU20295Used Option

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50672U Used NP271D Front Output Shaft for 2003-2004 Dodge NV271D Manual Shift Transfer Cases. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10998 NP271D Front Output Shaft for 2005-2012 Dodge NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50681 New Process NV271D Rear Output Shaft Flange Nut For all fixed rear yoke type Dodge NV271D Manual Shift Transfer Cases in 2007-2012 Dodge Ram Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10512 New Process NV271D Front Output Shaft Flange Nut For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Planetary Parts

top_page
product note

The non-rebuildable Planetary Assembly has 6 needle bearing supported pinion gears that are driven by the input shaft to provide low range gearing for the NV271D Transfer Case. In most cases, the Planetary Assembly will never need replacement, but the 34 small needle bearings under each pinion gear and the pinion gear teeth themselves are prone to damage from from lack of lubrication/dirty oil and from metal chips that may occur under high wear situations. The two Planetary Thrust Washers and the Snap Ring should be replaced any time you perform major transfer case service. The Planetary Annulus Gear, which is the big gear pressed in the front case into which the Planetary Assembly fits, is only sold as part of the Front Case Half.

photo

QU11001 NV271D Planetary Assembly For all 2003 and newer Dodge Ram 4x4s with New Process NV271D Transfer cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10900 Planet Thrust Washer, Front Is a round plastic Thrust Washer that is located between the front of the Input Gear teeth and QU11039 Planetary Lock Plate. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10572 NV271D Planetary Thrust Washer, Rear For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50761 Aftermarket Input Shaft to Planetary Thrust Washer More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11039 Planetary Lock Plate or Thrust Plate for NV271D Transfer Cases Is a 1/8" thick iron washer for all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10814 Planetary Snap Ring Dodge NV271D Secures your Input Shaft and Thrust Washers inside the Planetary Set. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Poppet Parts

top_page
product note

The Poppet parts put tension on the Sector Shaft Cam to keep the Transfer Case from "jumping" out of gear. The detents you feel when shifting your transfer case are from the Poppet Plunger moving into and out of the "teeth" on the Sector Shaft Cam.

photo

QU11016 Poppet Plug for NV271D Transfer Cases For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11017 Poppet Detent Spring for NV271D Transfer Cases For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11018 Poppet Detent Plunger for NV271D Transfer Cases For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10800 Poppet Plug O-Ring for NV271D Transfer Cases For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Seals

top_page
product note

The NV271D Transfer Case uses both conventional Seals and O-Rings to keep oil in and water out. The Slip Yoke type Rear Output Seal is typically the first Seal to fail, usually from the heavy Slip Yoke wearing out the rear output Bushing (QU50261). To disassemble the NV271D Front Case, both the Input Seal and Front Output Seal must be destroyed while removing them in order to access the Input and Front Output Shaft Snap Rings.

photo

TK2164 NV271 Minor Seal Kit With O-rings and small seals for Dodge NV271D New Venture Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50254 Input Seal For all 2003-up Dodge Ram New Process NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU80048 Front Output or Rear Output Seal QU80048 is the Front Output Seal for all 2003-up Dodge Ram New Process NV271D Manual Shift Transfer Cases AND the Rear Output Seal for all NV271D Transfer Case with Fixed Yoke type rear output shafts. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50177 Genuine New Process Oil Pump Seal For all 2003-up Dodge Ram New Process NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10800 Poppet Plug and Shift Indicator Switch O-Ring For all 2003-up Dodge Ram New Process NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10802 Oil Pump Inlet O-Ring For all 2003-up Dodge Ram New Process NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10930 Booted Rear Output Seal For all Dodge Ram New Process NV271D Manual Shift Transfer Cases with Slip Yoke Type Rear Output Shafts. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50495 NV271D Shift Shaft Seal Is the tiny Seal that fits inside the Shift Support and seals around the Sector Shaft. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50674 O-Ring, Shift Support to Case For 2003 NV271D manual shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10950 Shim Gasket, Shift Support to Case for 2004-up NV271D manual shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TKA2163 Primary Kit for 2003-2012 Dodge New Venture NV271D and NV273D transfer cases having slip type rear output shaft. Includes input, output, and oil pump seals. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Shifting: Major Parts

top_page
product note

Your New Process/New Venture NV271D can be manually shifted for Mode (4x2, Neutral, 4x4) and Range (1:1 Direct Drive High Range and 2.72:1 Low Range). Since the 2003 and newer Dodge Ram 4x4s that use NV271D Transfer Cases do not have front axle lockout hubs, you should be able to easily shift the transfer case into and out of 4x4 High Range on the go to compensate for changing road conditions. Forcing the Transfer Case into gear will result in engagement teeth wear. Most NV271D Transfer Cases will never need any of the major shifting parts replaced, but if your unit does, we stock the genuine original equipment replacement components you need.

photo

QU10991 Synchronizer Mode Hub for All Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10992 Synchronizer Mode Clutch Sleeve For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11000 NV271D Transfer Case Range Sleeve For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11003 Range Fork For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11002 Mode Fork For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11005 Shift Sector Cam For those 2004-2011 Dodge NV271D Manual Shift Transfer Cases with QU11011 2 Postion Shift Indicator Switch. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10974 Shift Support Assembly, NV271D For 2004 to Current Dodge Ram 4x4 Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK5006 2003-2005.5 NV271D Transfer Case Shift Rod Assemblies for NV5600 Manual Transmission Diesel Trucks for 2003-2005 Dodge Ram trucks with NV5600 manual transmissions and NV271D Manual Shift Transfer Cases with manual transmissions. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK5007 2003-2004 NV271D Transfer Case Shift Rod Assemblies for NV4500 Manual Transmission Diesel Trucks for 2003-2004 Dodge Ram trucks with New venture NV4500HD manual transmissions and NV271D Manual Shift Transfer Cases with manual transmissions. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK5008 Shift Rod Assembly 2004-2011 Diesel/Auto and 2005.5-2012 Diesel/G56 6 Speed Trucks Fits most 2003-2012 Dodge Ram 2500, Ram 3500, Ram 4500, and Ram 5500 4x4 trucks with Cummins Diesel engines and NV271D Manual Shift Transfer Cases. Auto transmission models include the 48RE and 68RFE. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK2136 Transfer Case Shift Rod Assembly for 2007-2012 Dodge Ram with Aisin Automatic Fits 2007-2012 Dodge Ram 3500, Ram 4500, and Ram 5500 4x4 chassis cab trucks with Cummins Diesel engines, Aisin AS68RC 6 Speed Automatic Transmissions and New Venture NV271D Manual Shift Transfer Cases. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK2137 Shift Rod Assembly 2006-2013 Gas/545RFE Auto For 2006-2012 Dodge Ram 2500, and Ram 3500 4x4 trucks with Hemi® V8 gas engines, 545RFE 5 speed automatic transmissions and NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Shifting: Small Parts

top_page
product note

Of all the parts on NV271D manual shift Transfer Cases, the Shift Linkage Grommets are the most common component to require replacement. Periodically inspect the Grommets on either end of the external shift rod between your floor shifter and transfer case shift lever. Internally, the Shift Fork Pads are also a wear item so they should be replaced any time you are performing internal transfer case service.

photo

QU11025 Shift Linkage Grommet For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10951 Range Fork Shift Pad For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10164 Mode Fork Tip Pads For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10670 Mode Fork Center Pad For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11011 2 Position Indicator Switch Is a genuine original equipment replacement switch for 2004-2011 NV271D transfer cases with QU11005 Shift Sector Cam. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90002 Male Double Terminal Replacement Pigtail for QU11011 2 Postion Indicator Switch Has two 22" long wires protected by solid plastic loom. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11090 5 Position Shift Indicator Switch for Dodge New Process NV271D Transfer Cases Is a genuine original equipment Switch for most 2003-2013 Dodge NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11004 Mode Fork Spring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11006 Dodge NV271D Transfer Case Shift Lever Includes QU11025 Linkage Bushing. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU95035 Shift Lever Lock Nut Retains QU11006 Shift Lever to the Sector Shaft. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11008 Shift Lever Flat Washer Fits between QU11006 Shift Lever and QU11007 Lock Nut. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11009 Shift Lever to Case Thrust Washer/Spacer For New Venture NV271D Manual Shift Transfer Cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11177 Shift Knob Insert for Dodge NV271 More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11178 Gearshift Boot For 2007 Dodge NV271. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11179 Floor Shift Screw Mounting Screw M6X1X25 Transfercase Shifter to Floor Pan for NV271 Transfercase. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11180 Shift Control Shifter for NV271 Dodge. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11181 Shift Lever Screw Hex Head Screw M8X1.25X25.00 Mounting Transfercase Upper Lever on NV271 Dodge. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11182 Transfercase Lever For NV271 Dodge. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
product note

The small hardware items you may need to finish a big job are usually the hardest parts to find. Anyone who has done much mechanical work has either misplaced a small part and/or encountered hardware that is worn, corroded, or broken. Our NV271D Small Parts inventory includes those odds and ends that do not fit any of our other product categories.

photo

QU50191 Chip Magnet For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11020 Flange Head Bolt, NV271D Rear Case to Front Case 24 of these Bolts plus one QU11021 Bolt are used to secure the Rear Case Half to the Front Case Half. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11021 Special Extra Long Flange Head Bolt, NV271D Rear Case to Front Case One of these special extra long Bolts is used with 24 QU11020 Bolt to join the two main case halves. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11022 Bolt, NV271D Rear Retainer to Rear Case 8 of these Bolts are used to Attach The Rear Output Extension Housing to The Rear Case Half. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU11091 Case Dowel Alignment Pin Two of these Pins are used to algin the front and rear Case Halves. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10939 2003-2012 Dodge NV271D Transfer Case Drain or Fill Plug Is a genuine, original equipment New Process redesigned plug to replace either (or both) the drain and fill plugs on your NV271D Transfer Case. Cadmium plated Plug has pre-applied sealant on threads and hex drive hole. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Snap Rings

top_page
product note

Snap Rings are one of the most overlooked replacement items during a rebuild, but if a weakened or misshaped Snap Ring fails, chances are the resulting damage will pretty much destroy your Transfer Case. We stock all the genuine original equipment Snap Rings for your Dodge Ram 4x4 with a New Process/New Venture NV271D Manual Shift Transfer Case.

photo

QU10952 Input Bearing to Input Shaft Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10907 Input Bearing to Front Case Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10814 Planetary Snap Ring Dodge NV271D Secures your Input Shaft and Thrust Washers inside the Planetary Set for all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10975 Mode Shift Hub to Output Shaft Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10909 Rear Output Bearing to Rear Case Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10908 Rear Output Shaft to Rear Output Bearing Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10902 Thin Sprocket Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2005-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10905 Thick Sprocket Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2004 Dodge Ram 2500, Ram 3500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10910 Front Output Bearing to front Case Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10600 Front Output Shaft to Front Output Bearing Snap Ring For all Dodge NV271D Manual Shift Transfer Cases in 2003-2012 Dodge Ram 2500, Ram 3500 and 2008-2012 Dodge Ram 4500, Ram 5500 4x4 trucks. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TKA2166 Complete Snap Ring Kit for 1999-2010 for Dodge NV271D New Venture transfer cases. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

(Continued from Top of Page) due to the many brand specific features of each model. The NV271D along with the electric shift NV273D has wider span between the two output shafts compared to any previous Dodge Transfer case and almost no parts are interchangeable between it and the preceding NP241 series of transfer cases used by Dodge for the 1994 to 2002 model years. Since it's introduction in 2002 as a 2003 model year component, the NV271D has undergone a number of modifications to improve reliability and/or reduce manufacturing cost. Most of these modifications can be retrofitted to early production cases with little or no trouble.

Most NV271D transfer cases have a 34 spline Slip Yoke Type rear output shaft which is unique to Dodge, however many 2007 and newer heavy-duty models (mainly chassis cab trucks) have a fixed rear output flange similar to that use by Ford. The NV271D is available with a 23 spline input for Dodge automatic transmissions or one of two 29 spline input shafts for manual transmissions or the Aisin AS68 6 speed automatic transmission.

For parts identification purposes, a Round Tag is affixed to the back of the rear case and a Decal usually located on top of the front case. Stamped on the tag are the Model Number (NV271D), Assembly Number (8 digit number plus two letters), Transfer Case Build Date, and Low Range Ratio (2.72). In most cases, parts identification is pretty straight forward with the year and assembly number, but there are times we may need additional information such as the Vehicle Identification Number (VIN), engine, transmission model, transfer case build date, or truck model.