Parts for 1966-1971 Ford Bronco Dana 30 Open Knuckle Front Axle Parts

Gaskets

top_page
product note
In the mid 1970's Dana made a differential cover design change to heavy gauge covers with flat mating flanges. Unlike the previous, thin gauge covers with embossed flanges which were made for use with a cut gasket, the new design, thick gauge covers are designed for sealing with RTV. If you desire, you can still use a gasket with the new type cover by combining the gasket with thin films of RTV. We stock both Ultra Gray RTV Sealant and genuine Dana Gaskets
photo

QU40236 Dana 30 Front Differential Cover Gasket Is a genuine Dana Spicer replacement Diff Cover Gasket for all 1966-1971 Ford Broncos with Dana 30 open knuckle front axles

QU42027 Hipro Dana 30 Differential Cover Gasket For Model 30 axles. Reusable Dana 30 High Performance Differential Gasket is a genuine Dana part

photo

S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes

Hubs and Hub Parts

top_page
photo

QU51181 Warn 20990 Premium Hub Set for Dana 30 Front Axles With internally splined front wheel hubs. Reliable and good looking. QU51181 Fits Ford Bronco Dana 30 1966-1972

photo

QU40044 Hub Dial O-Ring For Dana original equipment, plastic dial, spline mount factory hubs used on 1968 to 1971 Ford Ford Bronco Dana 30 front axles with internally splined wheel hubs

photo

QU40699 Large Hub Plate to Wheel Hub Internal Snap Ring For Dana original equipment, plastic dial, spline mount factory hubs used on 1968 to 1971 Ford Ford Bronco Dana 30 front axles with internally splined wheel hubs

photo

QU40032 Axle Shaft Snap Ring Is a genuine original equipment part for 1968 to 1971 Ford Ford Bronco Dana 30 front axles with internally splined wheel hubs

photo

QU40154 Hub Cam Body for Spicer Plastic Dial Internal Mount Hubs Is a new old stock (NOS) genuine Spicer replacement part for original equipment Spicer Lockout Hubs used on 1968 to 1971 Ford Ford Bronco Dana 30 front axles with internally splined wheel hubs

photo

QU40050 Spicer Tapered Hub Spring For Spicer Plastic Dial factory hub-locks or full time drive gears

photo

QU40035 Hub Spring Plate Fits between the QU40050 hub spring and the outer wheel bearing cup on 1968 to 1971 Ford Bronco Dana 30 front axles with internally splined wheel hubs

photo

QU56012 Original Equipment Warn® Hub Screw For Warn® Spline Mount Hubs for 1967-1971 Ford Bronco Dana 30 front axles with internally splined wheel hubs

photo

QU40113 Torx® Upgrade Screw For Warn® Spline Mount Hubs in 1967-1971 Ford Bronco Dana 30 front axles with internally splined wheel hubs

King Pin Parts

top_page
product note

1967-1971 Ford Bronco Dana 30 Front Axles use an unusual open knuckle design the uses King Pins and Knuckle Bearings like a closed knuckle axle instead of Ball Joints. Once installed, there is no way to lubricate the Knuckle Bearings without disassembly so it is imperative that you pack your new Bearings with a high quality grease such as Pyroplex Plus ® before installation. Knuckle Bearing preload is set using a combination of shims located between the King Pin Caps and Steering Knuckles. On 1968-1971 axles, compressible dampeners positioned between the inner Cup Plug and King Pin Stem are used to control "Death Wobble" (These dampeners also affect the Knuckle turning preload)

photo

QU20096 Steering Knuckle Seal Plate and Dampener Kit Is a genuine Dana original equipment Kit for 1966-1971 Ford Bronco with Dana 30 open knuckle front axle. QU20096 fits under a King Pin and is designed to dampen shocks to eliminate "Death Wobble"

photo

QU20231 King Pin Seal For 1966-1971 Ford Bronco with Dana 30 open knuckle front axle. QU20231 fits over the Knuckle Bearing and it seals on the King Pin Stem

photo

QK4617 Ford Bronco Dana 30 Open Knuckle Front Axle Knuckle Bearing Kit Includes 4 Timken® Knuckle Bearings, 4 Timken® Knuckle Bearing Cups, and Rectangular Knuckle Shim Set to service both sides of your vintage 1966-1971 Ford Bronco with Dana 30 open knuckle front axle

photo

QU40773 Knuckle Shim Kit for Ford Bronco Dana 30 Closed Knuckle Front Axles Includes a selection of rectangular shims to adjust the Knuckle Bearing preload. Services one side of your vintage 1966-1971 Ford Bronco with Dana 30 open knuckle front axle

photo

QU20091 and QU20092 Trapezoid Knuckle Shims For Many 1966-1971 Ford Bronco with Dana 30 open knuckle front axle. fit between the combination steering arm/upper king pin to adjust the turning preload for the Drivers Side Steering Knuckle

photo

QU50627 Ford Bronco Dana 30 Open Knuckle Timken® Knuckle Bearing Cup For 1966-1971 Ford Bronco with Dana 30 open knuckle front axle

photo

QU50628 Ford Bronco Dana 30 Open Knuckle Timken® Knuckle Bearing For 1966-1971 Ford Bronco with Dana 30 open knuckle front axle

photo

TK50784 Torque King Timken Small Closed Knuckle King Pin Bearing Kit For Ford Dana 30

Axle Universal Joints

top_page
photo

QU40822 1310 Series Axle U-Joint With 1-1/16" cups for 1972-1975 Ford Bronco Dana 30 open knuckle front axles

Wheel Bearings (Individual)

top_page
photo

QU50447 Timken® Outer Wheel Bearing Cup For all 1966-1971 Ford Bronco 4x4s with Dana 30 open knuckle front axles

photo

QU50448 Timken® Outer Wheel Bearing For all 1966-1971 Ford Bronco 4x4s with Dana 30 open knuckle front axles

photo

QU50577 Timken® Inner Wheel Bearing Cup For all 1966-1971 Ford Bronco 4x4s with Dana 30 open knuckle front axles

photo

QU50578 Timken® Inner Wheel Bearing For all 1966-1971 Ford Bronco 4x4s with Dana 30 open knuckle front axles

Wheel Seals (Individual)

top_page
product note
For 1966-1971 era Ford Broncos, there is a choice between two different wheel seals with the change occurring in mid-model year 1969. QU50654 seals are correct for 1966-1968 vehicles and 1969 Broncos up to serial number F30, 000. Use QU90001 Seal for 1969 Broncos starting with serial number F30000 and all 1970 and 1971 vehicles. The front wheel bearings are the same for all 1966-1971 Broncos
photo

QU50654 1966 to 1969-1/2 Inner Wheel Seal for Ford Bronco Dana 30 Wheel Hub Fits all 1966 to 1969.5 Dana 30 front axles in Ford Broncos up serial number F30000. Seal width is 1/4", seal outside diameter is 3-1/4"

photo

QU90001 1969-1/2 to 1971 Inner Wheel Seal for Ford Bronco Dana 30 Wheel Hub fits all 1969.5 to 1971 Dana 30 front axles in Ford Broncos starting with serial number F30001. Seal outside diameter is approximately 3-21/64"

Link to our QU90001 Catalog Page

Wheel Bearing Kits

top_page
product note
Ford used the same wheel bearings for all 1966 to 1971 Bronco Dana 30 front axles. There is a choice between two different wheel seals with the change occurring in mid-model year 1969. TK4911F/TK4912F Kits are correct for 1966-1968 vehicles and 1969 Broncos up to serial number F30, 000. TK4711/TK4780 Kits fit 1969 Broncos starting with serial number F30000 and all 1970 and 1971 vehicles. Kits include Timken® Wheel Bearings and North American made Wheel Seals, plus you can order a Kit with or without install tools!
photo

TK4911F/TK4912F Torque King® Wheel Bearing Kits for 1966-1969.5 Ford Bronco Dana 30 Front Axles Fit 1966-1969.5 Ford Bronco 4x4s with Dana 30 front axles. 1969 vehicles that use this Kit will have a serial number below F30001

photo

TK4711/TK4780 Torque King® Wheel Bearing Kits for 1969.5-1971 Ford Bronco Dana 30 Front Axles Fit 1969.5-1971 Ford Bronco 4x4s with Dana 30 front axles. 1969 vehicles that use this Kit will have a serial number above F30000