Parts for 1980-1983 Ford Bronco, F150, & F250 4x4s with Dana 44IFS Twin Traction Beam Front Axles

Axle Identification

top_page

Ball Joints: Pressed in Steering Knuckle, nuts at top.

Axle Assemblies and Axle Housings

top_page
photo

QU50097 Axle Beam Pivot Bushing Fits either left or right axle beams. One of these Bushings gets pressed into the inboard end of each axle beam. More Info

$22.62
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40377 F-250 Right Axle Shaft Assembly Is a genuine Dana factory assembly that includes QU40920 Outer Axle Shaft, QU40616 Inner Axle Shaft and a Dana factory lubed universal joint. Fits all 1980-1983 Ford F-250 4x4s with Dana 44IFS front axles.

More Info

$179.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QA40377R F-250 Reconditioned Right Axle Shaft Assembly Is a reconditioned axle shaft assembly and comes with new u-joint. Fits all 1980-1983 Ford F-250 4x4s with Dana 44IFS front axles. More Info

$110.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Beams

top_page

QU20450U Good Used 1980-1983 Ford F250 Dana 44IFS Right Axle Beam is a good used right or passenger side Dana 44IFS axle beam for 1980-1983 Ford F250 4x4 trucks with 3800 or 3850 pound front axles.

Note: These used axle beams are bare except for the original pivot bushing. Due to the age of these beams, we recommend you replace the pivot bushing with a new QU50097 bushing.

More Info

$145.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU20451U Good Used 1980-1983 Ford F250 Dana 44IFS Left Axle Beam is a good used left or drivers side Dana 44IFS axle beam for 1980-1983 Ford F250 4x4 trucks with 3800 or 3850 pound front axles.

Note: These used axle beams are bare except for the original pivot bushing. Due to the age of these beams, we recommend you replace the pivot bushing with a new QU50097 bushing.

More Info

$160.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU20552U Used Right Axle Beam for Ford F150 Dana 44IFS. More Info

$150.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU20553U Used Left Axle Beam for Ford F150 Dana 44IFS. More Info

$150.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shafts

top_page
product note

Although all Ford Dana 44IFS axle shafts take the same u-joints, the inner and outer axle shafts have different lengths for Bronco/F150 and F250 models.

photo

QU50444 1/2 ton Front Outer Axle Shaft Is a genuine Dana part for 1980-1983 Ford Bronco F150 Dana 44IFS. 9.92" from end to center of U-Joint hole. Does NOT fit 1987-1988 with pancake front wheel hub. More Info

$146.15
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU40624 1/2 Ton Left Inner Axle Shaft Is a genuine Dana part that fits ALL 1980-1983 Ford Bronco and 1983.5-1996 Ford F150 4x4 Dana 44IFS front axles.
More Info

$106.87
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40920 3/4 ton Front Outer Axle Shaft Is a genuine Dana part that fits ALL 1980-1983 Ford F250 4x4 Dana 44IFS front axles. Length from center of u-joint hole to end is 9-13/16".

More Info

$89.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU40921 3/4 ton Left Inner Axle Shaft Is a genuine Dana part that fits ALL 1980-1983 Ford F250 4x4 Dana 44IFS front axles.

More Info

$158.01
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40616 3/4 ton Right Inner Axle Shaft Is a genuine Dana part that fits ALL 1980-1983 Ford F250 4x4 Dana 44IFS front axles. Length from center of u-joint hole to end is 23-21/32". More Info

$102.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40263 1980-1983 Bronco and F150 Right Inner Axle Shaft is a genuine Dana OEM replacement Inner Axle Shaft that fits the passenger side of ALL Dana 44 Independent Front Suspension (IFS) front axles in 1980-1983 Ford Bronco and Ford F150 4x4 vehicles.
More Info

$146.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shaft Bearings, Seals, and Seal Kits

top_page
product note

The original Ford Dana 44IFS Front Axle uses a combination guide and seal for the Left Axle Shaft Seal and a conventional seal sandwiched between the axle support bearing and axle thrust plate on the right side.

photo

QK4035 1980-1983 Ford Dana 44IFS Right Axle Shaft Bearing and Seal Kit with Lock Ring for 1980-1983 Ford Dana 44 IFS Front Axles with bolt in right side differential output shafts. QK4035 includes the axle shaft seal, axle shaft bearing, and bearing lock collar. Kit contains both USA and import parts.  Replaces QU40173 which is NLA.
More Info

$39.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40087 Left Ford Dana 50 IFS Axle Shaft Seal Fits all 1980-1983 Ford Bronco and F-150 4x4 trucks with 1st design Dana 44 Twin Traction Beam® IFS front axles. More Info

$6.58
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU42109 Timken® Axle Shaft Bearing with Lock Ring for 1980-1983 Ford Dana 44 IFS with bolt in right side differential output shafts. More Info

$30.13
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU42110 Right Differential Output or Axle Shaft Seal for 1980-1983 Ford Dana 44IFS front axles with bolt in axle shaft. Also used on some semi-float rear axle shafts.

More Info

$12.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Universal Joints

top_page
product note

We offer three different Universal Joints for your hard working 1980 to 1983 4x4 Bronco or F-Series 4x4 Truck with a Dana 44 solid front axle. All are good, reliable products, but different manufacturing techniques and seal types will have a major influence on the ultimate life of the joint. Our most popular choice is our TK40712 cold-forged, non-greaseable, original equipment replacement U-Joint. The wear-resistant cold-forged cross and superior sealing make it the best choice for both low maintenance and long life. QU40754 and QU90007 are hot-forged and are equipped with single lip seals. They are greaseable through a flush fitting threaded into one of the caps. With good maintenance and quality lubricant like our Pyroplex® Plus Grease, these joints will last and last. Click on the Part Number Links to see our individual product pages for more info.

photo

TK40712 Torque King® Premium Non-Greaseable Axle U-Joint for 1980-1983 Ford Dana 44IFS Front Axles Original equipment type universal joint with Premium Cold-Forged cross and superior pressure-type seals. More Info

$41.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90007 Greaseable Axle U-Joint With Rubber Seals for 1980-1983 Ford Dana 44IFS Front Axles Value priced with Hot-Forged cross and flexible rubber seals. More Info

$33.78
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joints

top_page
photo

QA50095 Premium Greaseable Upper Ball Joint For all Ford Dana 44IFS front axles. More Info

$65.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50222 Premium Greaseable Lower Ball Joint For all Ford Dana 44IFS front axles. More Info

$49.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40600 and QU50861 Fixed Camber Bushings For 1980-1984 Ford Dana Model 44 IFS front axle. More Info

Brake Parts

top_page
photo

QU20054 Front Disc Brake Caliper Tension Spring For 1980-1983 Ford F250 Dana 44 front axle with dual piston calipers. More Info

$4.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU80002 Caliper Slide Lock Bolt Is a special, hex head bolt that threads into the caliper anchor plate on your disc brake equipped 1980 to 1983 Ford Dana 44IFS front axle. The tapered body between the threads and end fits into the inner notch of the caliper slide or key. More Info

$4.96
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20447U Used F-250 Right Disc Brake Shield Fits all 1980-1983 Ford F250 4x4 trucks with 3800 pound rated Dana 44IFS Front Axles. Shield will have surface rust and may have some dings/dents, but this used right side disc brake rotor splash shield is in reasonably good condition and totally functional. More Info

$49.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20448U Used F-250 Left Disc Brake Shield Fits all 1980-1983 Ford F250 4x4 trucks with 3800 pound rated Dana 44IFS Front Axles. Shield will have surface rust and may have some dings/dents, but this used left side disc brake rotor splash shield is in reasonably good condition and totally functional. More Info

$49.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20511U Used 1980-1983 Bronco and F-150 Right Disc Brake Shield fits all 1980-1983 Ford Bronco and F150 4x4 trucks with 3500 or 3550 pound rated Dana 44IFS Front Axles. Shield will have surface rust and may have some dings/dents, but this used right side disc brake rotor splash shield is still functional. More Info

photo

QU20512U Used 1980-1993 Bronco and F-150 Left Disc Brake Shield fits all 1980-1983 Ford Bronco and F150 4x4 trucks with 3500 or 3550 pound rated Dana 44IFS Front Axles. Shield will have surface rust and may have some dings/dents, but this used left side disc brake rotor splash shield is still functional. More Info

Differential Parts

top_page

QU42084U Used Fast Ratio Loaded Differential for 3.00 to 3.73 ratio gear sets in 1980-1983 Ford Bronco, F150, and F250 4x4s. More Info

$95.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU42018U Good Used 1980-1983.5 Ford Dana 44IFS Bare Differential Output Shaft More Info

$125.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU42101R Reconditioned Bolt-In Type Right Differential Output Shaft Assembly for 1980-1983 Ford Dana 44IFS front axles in Bronco, F150, F250 4x4 trucks. Includes TK40712 U-joint. Note: Bearing and Seal, if present should be replaced. More Info

$249.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings (Individual)

top_page
product note

All 1980 to 1983 Ford Broncos and F-100/F-150/F-250 4x4 trucks with Dana 44 Independent Front Suspension Twin Traction Beam® Front Axles use the same differential and pinion bearings.
All bearings are not created equal for fit or durability, so we only stock first class, long lasting, Timken® Differential and Pinion Bearings for your Dana front axle. Timken® was and is a a major original equipment supplier of top-notch bearing components to Dana Spicer. Since I first started rebuilding Dana axles in the mid 1970's, I have found Timken® Bearings to be the most consistent in relation to the published dimensions of any bearing on the market which makes rebuilding an axle right the first time a WHOLE lot easier!

photo

QU50533 Timken® Outer Pinion Bearing Cup For 1980-1983 Ford Bronco and Ford F-100/F-150/F-250 4x4 trucks with Dana 44IFS Twin Traction Beam® front axles. More Info

$9.32
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50534 Timken® Outer Pinion Bearing For 1980-1983 Ford Bronco and Ford F-100/F-150/F-250 4x4 trucks with Dana 44IFS Twin Traction Beam® front axles. More Info

$20.96
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50535 Timken® Inner Pinion Bearing Cup For 1980-1983 Ford Bronco and Ford F-100/F-150/F-250 4x4 trucks with Dana 44IFS Twin Traction Beam® front axles. More Info

$11.64
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50536 Timken® Inner Pinion Bearing For 1980-1983 Ford Bronco and Ford F-100/F-150/F-250 4x4 trucks with Dana 44IFS Twin Traction Beam® front axles. More Info

$26.22
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50538 Timken® Differential Side Bearing For 1980-1983 Ford Bronco and Ford F-100/F-150/F-250 4x4 trucks with Dana 44IFS Twin Traction Beam® front axles. (uses 2) More Info

$17.72
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50537 Timken® Differential Side Bearing Cup For 1980-1983 Ford Bronco and Ford F-100/F-150/F-250 4x4 trucks with Dana 44IFS Twin Traction Beam® front axles. (uses 2) More Info

$12.36
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets and Gasket Makers

top_page
photo

S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes. More Info

$8.85
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hubs and Hub Parts

top_page
photo

QU51181 Warn 20990 Premium Hub Set for Dana 44 Front Axles With internally splined front wheel hubs. Reliable and good looking. QU51181 Fits most Ford Dana 44IFS 1980-1983 F150 and F250 4x4s.

More Info

$129.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU56018 Warn Manual Hub Set For 1980-1983 Ford Bronco, F100, F150, and F250 4x4s with Dana 44IFS front axles. More Info

$99.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU56019 Warn Manual Hub Set More Info

$80.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4918 Hub Service Kit For QU56018 Warn Manual Hub Set. More Info

$36.84
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20351 1980-1983 New Hub and Rotor Assembly with 1/2" Studs Fits all Dana 44 equipped 1980-1983 F250 4x4 trucks with the stock Dana 44IFS front axle and 1/2" diameter wheel studs. More Info

$299.01
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20348 1980-1983 F150, Bronco Splined Front Hub Is a brand new internally splined front wheel hub with studs that fits all 1980-1983 Ford F150 and full size Bronco 4x4s. More Info

$132.57
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20389U One Functional Used Dana Factory Lockout Hub and Red Dial fits 1980-1983 Ford Bronco F150 and F250 with Dana 44IFS front axles with splined wheel hubs. Complete except for QU40035 Spring Plate which must be ordered separately. More Info

$75.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40427 Dana 44 Full Time Front End Hub Cap for 1980-1983 Ford F250 trucks with Dana 44IFS front axles. More Info

$19.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous Parts

top_page
photo

QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound. More Info

$6.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU50861 0 Degree Camber Bushing for Ford Dana model 44 IFS front axles. More Info

$29.47
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Seals and Pinion Yokes

top_page
product note

1980-1989 Ford Dana 44IFS Front Axles use a Pinion Yoke made for the oversize 1.125" u-joint cups used on the Ford specific 1330F universal joints (See TK40723 and QU40776).

photo

QU20180 Ford Dana 44IFS Front Axle Pinion Yoke is a genuine original equipment Ford Front Pinion Yoke for 1980-1983 Ford Bronco, F150, and F250 4x4s with Dana 44 IFS (IFS=Independent Front Suspension) Twin Traction Beam™ front drive axles. More Info

Also available while supplies last, QU20180U, QU40850B

$64.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40578 Pinion Seal for Ford Dana 44 is a genuine Dana original equipment Pinion Seal for 1980-1983 Ford Bronco, F150, and F250 4x4s with Dana 44 IFS (IFS=Independent Front Suspension) Twin Traction Beam™ front drive axles. More Info

$15.16
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40841 Driveshaft U-Bolt Kit for Ford Dana 44 Front Axle fits all 1980-1983 Ford original equipment type Front Dana 44IFS pinion yokes. More Info

$7.76
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ring and Pinion Kits

top_page
product note

The ring and pinion gear sets used in Ford Dana 44IFS front axles have a reverse cut or spiral compared to conventional Dana 44 gear sets. The engineering reason for this is the pinion gear in Ford Dana 44 axles is located above the axle center line. Reverse Spiral Gear Sets are NOT interchangeable with standard Dana 44 gear sets.

QU42013 4.09 Ratio Ford Dana 44 Reverse Spiral Ring and Pinion Kit is a genuine Dana Gear Set for Ford high pinion Dana 44IFS front axles in 1980-1983 Broncos, F150, and F250 4x4s. QU42013 includes a matched, reverse cut Dana ring and pinion set, pinion bearings with cups, pinion seal, pinion nut, pinion washer, pinion slingers, pinion shims, differential shims, and ring gear bolts. More Info

Also available while supplies last: QU42012U Used 4.09 Ratio Reverse Spiral Ring and Pinion Gear Set

$453.85
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20509U Used 3.54 Ratio Ford Dana 44 Reverse Spiral Ring and Pinion Set is a good used, revers spiral Dana Gear Set for Ford high pinion Dana 44IFS front axles in 1980-1983 Broncos, F150, and F250 4x4s. QU42013 includes a matched 46 tooth ring gear and 13 tooth pinion gear. More Info

$90.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Slip Yokes

top_page
photo

QU42040 Axle Shaft Slip Yoke for 1980-1982 Ford Bronco, F150, and light duty F250 4x4 trucks with Dana 44IFS front axles. More Info

$129.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40334 Greaseable 1980-1982.5 Dana 44IFS Right Axle Shaft Slip Yoke with Press On Seal is a genuine Dana original equipment replacement splined Slip Yoke for 1980 to 1982.5 Ford Bronco, F-150 and standard F-250 4x4 trucks equipped with the Dana 44 IFS Twin Traction Beam® Front Axle. The yoke side of QU40334 is attached to the Right Differential Output Shaft by the center axle u-joint and the splined side takes the right inner axle shaft. Also QU40334U Used Axle Shaft Slip Yoke Assembly Limited to stock on hand. More Info

$119.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindles and Spindle Nuts

top_page
photo

QU40106 Rachet Type Spindle Nut For Ford Dana 44 Front Axles.

More Info

$29.89
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU40309 Spindle for 1980-1983 Bronco and F150 with Internal Spline Wheel Hubs is a Spindle Kit for 1980-1983 Ford 4x4 Broncos and F150 trucks. Includes your new Spindle with needle bearing, two v-seals and axle shaft thrust washer.

More Info

$356.42
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Y440309 Replacement Spindle for 1980-1983 Ford Bronco and F150 trucks is a low cost, yet high quality replacement part. Imported.

More Info

$246.84
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU20510U Used Bare Spindle is for 1980-1983 Bronco and F150 with Internally Splined Wheel Hubs. Available While Supplies Last.

More Info

$95.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU42005 8 Bolt Front Spindle for 1980-1983 F250 with Dana 44IFS Front Axle is a genuine Dana factory part.

More Info

$279.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Y442005 8 Bolt Front Spindle for 1980-1983 F250 with Dana 44IFS Front Axle is a high quality replacement spindle kit.

More Info

$290.18
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Steering Knuckles

top_page

QU20513U Used Right Bronco and F150 Steering Knuckle is a good used right or passenger side Steering Knuckle for all 1980-1983 Ford Bronco and F150 4x4s. This is correct Knuckle for your Ford if your brake caliper is retained by a drive in key topped by an arched, flat cross-section spring. More Info

$75.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU20514U Used Left Bronco and F150 Steering Knuckle is a good used left or driver's side Steering Knuckle for all 1980-1983 Ford Bronco and F150 4x4s. This is correct Knuckle for your Ford if your brake caliper is retained by a drive in key topped by an arched, flat cross-section spring. More Info

N/A
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU20545U Used Left Steering Knuckle for 1980-1983 Ford F250 front axle Dana 44IFS front axle. More Info

$125.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU20546U Used Right Steering Knuckle for 1980-1983 Ford F250 front axle Dana 44IFS front axle. More Info

$125.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
photo

QT1044 Inner Pinion Bearing Installer For Dana 44IFS front axles in 1980-1983.5 Ford Bronco, F-150, or F-250 4x4 trucks. More Info

$31.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1115 Dana 44 Differential Side Bearing Installer For Dana-Spicer Model 44 front 4x4 front axles. QT1115 features a raised internal ring that contacts the bearing inner face so you can press or drive your diff bearings on without damaging the cage. More Info

$34.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1812 Outer Pinion Bearing Cup Installer Installer attaches to one of our QT1100 Series Driver Handles. Our precision CNC machined steel Installer is makes installing your QU50533 Outer Pinion Bearing Cup a simple and fast procedure. More Info

$19.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1100 Series Driver Handles Are used in conjunction with our seal and bearing cup installers. More Info

$19.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1803 Inner Front Wheel Bearing Cup Installer for Bronco, F150 For Dana 44IFS front axles in 1980-1983.5 Ford Bronco and F-150 4x4s. More Info

$24.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1801 Inner Wheel Bearing Cup Installer for F250 4x4s QT1801 is used to install the inner wheel bearing cup for all Dana 44IFS equipped 1980-1983.5 Ford F250 4x4s. More Info

$23.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1802 Outer Front Wheel Bearing Cup Installer For all Dana 44IFS front axles in 1980-1983.5 Ford Bronco, F-150, or F-250 4x4 trucks. More Info

$25.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1502 1983.5-1994 Wheel Seal Installer For Dana 44IFS front axles in 1980-1983.5 Ford Bronco, F-150, or F-250 4x4 trucks. More Info

$26.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1012i 4 Lug Spindle Nut Socket For all Dana 44IFS front axles in 1980-1983.5 Ford Bronco, F-150, or F-250 4x4 trucks. More Info

$16.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT5500 Wheel Bearing Packer Takes the mess out of packing wheel bearings, plus it minimizes the chances of getting contaminants mixed with your wheel bearing grease. The QT5500 Bearing Packer does an absolutely beautiful job of forcing grease between the individual bearing rollers. The easiest and most efficient way to repack the front wheel bearings on your Ford 4x4! More Info

$33.53
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearings and Seals (Individual)

top_page
photo

QU90001 Front Wheel Seal for Ford Dana 44IFS front axles is a high quality oil and grease seal with a garter spring plus an outer wiper lip that fits 1980-1983 4x4 Ford Bronco, F150, and F250. More Info

$8.27
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50447 Timken® Outer Wheel Bearing Cup For all 1980-1983 4x4 Ford Bronco, F150, and F250 with Dana 44IFS front axles. More Info

$6.40
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50448 Timken® Outer Wheel Bearing For all 1980-1983 4x4 Ford Bronco, F150, and F250 with Dana 44IFS front axles. More Info

$13.77
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50577 Timken® Bronco and F150 Inner Wheel Bearing Cup For all 1980-1983 4x4 Ford Bronco and F150 with Dana 44IFS front axles. More Info

$9.11
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50578 Timken® Bronco and F150 Inner Wheel Bearing For all 1980-1983 4x4 Ford Bronco and F150 with Dana 44IFS front axles. More Info

$13.91
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50446 Timken® F250 Inner Wheel Bearing Cup For all 1980-1983 4x4 Ford F250 trucks with Dana 44IFS front axles. More Info

$9.46
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50412 Timken® F250 Inner Wheel Bearing For all 1980-1983 4x4 Ford F250 trucks with Dana 44IFS front axles. More Info

$14.46
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing and Seal Kits

top_page
product note

It is always good preventative maintenance to replace the all wheel bearings and seals when restoring or maintaining your vintage 3/4 ton. The parts availability for decades old 4x4s declines on a daily basis. Wrecking a wheel hub and/or spindle when the old bearing you reused fails can either cost you a mint or put your broken-down truck on blocks forever. We stock high quality Timken® Wheel Bearings and North American made Wheel Seals to keep your big Ford rolling.

photo

TK4711 Torque King® Master Wheel Bearing Kits with Tools for 1983-1994 Ford Dana 44IFS Bronco and F150, Front Axles Fit 1980-1994 F150, and Broncos with Dana 44IFS open knuckle front axles and internally splined front wheel hubs. This Kit will NOT fit 1987-1988 vehicles with pancake style front wheel hubs! More Info

$189.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK4780 Torque King® Wheel Bearing Parts Only Kits for 1983-1994 Ford Dana 44IFS Bronco and F150, Front Axles Fit 1980-1994 F150, and Broncos with Dana 44IFS open knuckle front axles and internally splined front wheel hubs. This Kit will NOT fit 1987-1988 vehicles with pancake style front wheel hubs! More Info

$98.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

TK4751 1980-1996 Torque King® Front Wheel Bearing and Seal Kits with Tools for Ford F250 Dana 44IFS Front Axles These Kits fit 1980 to 1996 Ford F-250 4x4s with 3800 or 3850 pound rated Dana 44IFS front axles. Do the job right the first time with premium quality parts and installation tools custom made for the job. TK4751 Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle. More Info

$194.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TK4752 1980-1996 Torque King® Front Wheel Bearing and Seal Kits for Ford F250 Dana 44IFS Front Axles These Kits fit 1980 to 1996 Ford F-250 4x4s with 3800 or 3850 pound rated Dana 44IFS front axles. Do the job right the first time with premium quality parts. Includes 4 Timken® Bearings with Bearing Cups and 2 Wheel Seals. More Info

$101.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Discontinued Parts

top_page
photo

QU40173 Right Axle Shaft Bearing and Seal Kit Is a genuine original equipment Dana Kit for 1980-1983 Ford Dana 44 IFS Front Axles with bolt in right side differential output shafts. Superseded to QK4035.

photo

QU40754 Greaseable Axle U-Joint With Metal Backed Seals for 1980-1983 Ford Dana 44IFS Front Axles with Hot-Forged cross and metal backed rubber seals. Superseded to QU90007.

photo

QU40171 Original Equipment Dana 44 IFS Ball Joint Set For all Ford Dana 44IFS front axles includes these Dana original equipment parts: one non-greaseable upper ball joint with nut, one non-greaseable lower ball joint with nut, one snap ring, on offset camber bushing, and one cotter key. Discontinued.

Discontinued Tools

top_page
photo

QT1815 Inner Pinion Bearing Cup Installer Attaches to one of our QT1100 Series Driver Handles. Our precision CNC machined steel Installer is makes installing your QU50539 Inner Pinion Bearing Cup a simple and fast procedure. Superseded by QT1812.

photo

QT1097 Differential Master Bearings Slip on your differential in place of the taper bearings and cups. Used along with a dial indicator to determine the correct differential shim thickness. Discontinued.