Parts for Dana-Spicer Model 60 Rear Axles in 1954-1972 Ford Trucks

Parts for Dana 60 Rear Axles in 1954 to 1972 Ford F-250 and F-350 Trucks.

Axle Shafts

top_page
photo
QU40577 Tapered Locking Bushing Cone for Dana 60 Rear Axle Shafts Fits 1954-1972 Ford Dana 60 rear axles with 7/16" axle shaft drive studs. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.

Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing

Link to QU40577 Large Text Individual Product Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings (Individual)

top_page
product note

Over the years, Dana has primarily used Timken bearings when building their axles. For long life and dimensional consistency, Timken bearings are unmatched by any other brand of bearing I have used rebuilding axles over the past 30+ years in the business. When you are a shade tree mechanic dealing with a diff and pinion rebearing job without all the fancy gauging tools we have, you always want your new bearings to be the same overall thickness as the original bearings were when the axle was built so your pinion depth, pinion preload and backlash are within the tolerance limits when you are done with the job. Timken bearings will almost always deliver that type of accuracy, plus the steel quality and surface finish is the world's best.

photo
QU50397 Differential Bearing Cup For Dana Model 60 Rear Axles in 1954-1972 Ford F-250 3/4 ton and F-350 1 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50398 Differential Bearing For Dana Model 60 in 1954-1972 Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50400 Outer Pinion Bearing Cup For Dana Model 60 in 1954-1972 Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50401 Outer Pinion Bearing For Dana Model 60 in 1954-1972 Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50406 Inner Pinion Bearing Cup For Dana Model 60 in 1954-1972Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50407 Inner Pinion Bearing For Dana Model 60 Rear Axles in 1954-1972 Ford F-250 3/4 ton and F-350 1 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Bearing Kits

top_page
photo
QU50491 Ford Dana 60 1953-1972 Differential Bearing and Seal Kit For your F-250 and F-350 4x4 trucks. This kit includes: QU50400 Outer Pinion Bearing Cup, QU50401 Outer Pinion Bearing, QU50406 Inner Pinion Bearing Cup, QU50407 Inner Pinion Bearing, 2 QU50397 Differential Bearing Cups, 2 QU50398 Differential Bearings; QU51065 early and QU50565 late, aftermarket pinion seal; QU50566 aftermarket pinion nut, QU50567 aftermarket differential and pinion shim kit; and QU90009 axle service pack. Contains USA and imported parts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Case

top_page
photo

QU42120U Used 16 Spline Dana 60 Loaded Open Differential Case for 4.10 and faster gear ratio Dana 60 axles in 1975 and older trucks.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Parts (Open)

top_page
product note

Differential problems with Dana 60 rear axles are not all that common. But Murphy, of Murphy's Law* really likes busted differentials, so when you hear that loud, heart-stopping, ominous BANG from the rear axle as your truck lurches to a grinding stop, you just KNOW it is one big dose of bad news. To help get you back on the road after you get rescued, we stock genuine original equipment Dana-Spicer Front Axle Differential Parts for your hard working Ford truck.
*Murphy's Law: "Anything that can go wrong, will go wrong"

photo
QU40518 Differential Pinion Mate Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each pinion mate gear and the differential case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40041 Differential Side Gear Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each side gear and the differential case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40520 Differential Cross Shaft for Open Differentials
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40519 Lock Pin for Differential Cross Shaft for Open Differentials Is used to lock QU40520 differential cross shaft to the diff case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
photo

QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo
QU40577 Tapered Locking Bushing Cone for Dana 60 Rear Axle Shafts Fits 1954-1972 Ford Dana 60 rear axles with 7/16" axle shaft drive studs. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.

Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing

Link to QU40577 Large Text Individual Product Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindle Nuts and Spindle Hardware

top_page
product note

Spindle Nuts have two functions and they are to provide for correct wheel bearing adjustment and to keep your wheel hubs in place. We stock both the original equipment double spindle nuts and tab lockwasher for your vintage Ford.

photo
QU20017 Spindle Lock Washer with Bend Over Tabs Fits all 1956-1972 F350 and 1969.5-1972 F250 trucks with double rear 2-9/16" rounded hex spindle nuts and 2" Spindle Threads. Sold individually
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU20018 Ford 2-9/16" Spindle Lock Nut for Dana Rear Axles Is a Ford original equipment spindle lock nut for all 1956-1972 F350 and 1969.5-1972 F250 trucks with double rear 2-9/16" rounded hex spindle nuts, and 2" spindle threads
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearings and Seals (Individual)

top_page
product note

Ford made a rear hub/bearing/seal design change during the 1969 the model year. My Ford parts book lists the change effective at VIN F30001. Most aftermarket sources list the change occurring at VIN F70001. If your 1969 F250 has a VIN between F30000 and F70001, you should physically verify which parts you need. F250 Dana 60 axles built before the change were available with both standard and heavy duty wheel bearing configurations.

photo

QU50411 Timken® F250/E200 Inner/Outer Wheel Bearing Cup For all 1969.5-1972 Ford F-250, E200 Dana 60 full float rear axles. Use 2 per side. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50412 Timken® F250/E200 Inner/Outer Wheel Bearing For all 1979.5-1972 Ford F-250, E200 Dana 60 full float rear axles. Use 2 per side. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU90001 1969.5 to 1972 Inner Wheel Seal for Ford F250/E200 Dana 60 Rear Wheel Hub Fits all Dana 60 full floating rear axles in 1969.5 to 1972 Ford F-250 3/4 ton trucks and E200 vans. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU52084 Timken® Outer Wheel Bearing for 1954-1972 Ford F250 Dana 60 with 12-1/8" rear brakes up to serial # F70,000. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50876 Timken® Inner or Outer Wheel Bearing Cup for 1954-1969.5 Ford F250 with 12-1/8" rear brakes up to serial # F70,000. Use 2 per side. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50877 Timken® Inner Wheel Bearing for 1954-1969.5 Ford F250 Dana 60 with 12-1/8" rear brakes up to serial # F70,000. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU20662 Rear Wheel Seal for 1954-1969.5 Ford F250 with 12-1/8" rear brakes up to serial # F70,000. More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing and Seal Kits

top_page
product note

The rear wheel bearings in 1954-1972 Ford Dana 60 Rear axles average about 125, 000 to 150, 000 miles before requiring replacement. Torque King® Premium Rear Wheel Bearing and Seal Kits for your Ford feature premium Timken® bearings and original equipment quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls. To help you install these vital components properly, Torque King® Master Kits include bearing cup and wheel seal installers. Why use makeshift installation methods that can damage precision surfaces when affordable tools are available to do the job right the first time?

photo
TK8303 1969.5-1972 Torque King® Master Rear Wheel Bearing & Seal Kit with Tools For 1969.5-1972 F250 3/4 Ton Dodge Trucks or 1969.5-1972 Ford E300 Vans with Dana 60 full floating rear axles. Kit includes Seal and Bearing Cup Installation Tools, Timken® Wheel Bearings, Original Equipment Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.

Link to our TK8303F Catalog Page
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK8320 1969.5-1972 Parts Only Torque King® Premium Rear Wheel Bearing & Seal Kit for 1969.5-1972 F250 3/4 Ton Dodge Trucks or 1969.5-1972 Ford E300 Vans with Dana 60 full floating rear axles. Kit includes Timken® Wheel Bearings, Original Equipment Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.

Link to our TK8320F Catalog Page
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Hubs

top_page
product note

Ford used several different wheel hubs for 1954-1972 Dana 60 Rear Axles.

QU20394U Used Rear Wheel Hub for 1969-1972 F250 Is a good used bare Rear Wheel Hub for all 1969.5-1972 Ford F250 4x2 or 4x4 trucks with serial number F30000 or higher
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!