Parts for Dana-Spicer Model 60 Rear Axles in 1973-1979 Ford Trucks

Parts for Dana 60 Rear Axles in 1973 to 1979 Ford F-250 and F-350 Trucks

Axle Shafts

top_page
photo
QU40577 Tapered Locking Bushing Cone for Dana 60 Rear Axle Shafts Fits those 1973-1979 Ford Dana 60 rear axles with 7/16" axle shaft drive studs. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.

Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing

Link to QU40577 Large Text Individual Product Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU42118U Good Used 1-5/16" 16 Spline Dana 60 Full Floating Rear Axle Shaft for 1973-1975.5 Ford F250. Length 34-9/16"

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings (Individual)

top_page
product note
Over the years, Dana has primarily used Timken bearings when building their axles. For long life and dimensional consistency, Timken bearings are unmatched by any other brand of bearing I have used rebuilding axles over the past 30+ years in the business. When you are a shade tree mechanic dealing with a diff and pinion rebearing job without all the fancy gauging tools we have, you always want your new bearings to be the same overall thickness as the original bearings were when the axle was built so your pinion depth, pinion preload and backlash are within the tolerance limits when you are done with the job. Timken bearings will almost always deliver that type of accuracy, plus the steel quality and surface finish is the world's best
photo
QU50397 Differential Bearing Cup For Dana Model 60 Rear Axles in 1973-1979 Ford F-250 3/4 ton and F-350 1 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50398 Differential Bearing For Dana Model 60 in 1973-1979 Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50400 Outer Pinion Bearing Cup For Dana Model 60 in 1973-1979 Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50401 Outer Pinion Bearing For Dana Model 60 in 1973-1979 Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50406 Inner Pinion Bearing Cup For Dana Model 60 in 1973-1979 Ford F-250 3/4 ton and F-350 1 ton trucks with Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50407 Inner Pinion Bearing For Dana Model 60 Rear Axles in 1973-1979 Ford F-250 3/4 ton and F-350 1 ton trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Bearing Kits

top_page
photo
QU50491 Ford Dana 60 Differential Bearing and Seal Kit For your 1973-1979 F-250 and F-350 4x4 trucks. This kit includes: QU50400 Outer Pinion Bearing Cup, QU50401 Outer Pinion Bearing, QU50406 Inner Pinion Bearing Cup, QU50407 Inner Pinion Bearing, 2 QU50397 Differential Bearing Cups, 2 QU50398 Differential Bearings; QU51065 early and QU50565 late, aftermarket pinion seal; QU50566 aftermarket pinion nut, QU50567 aftermarket differential and pinion shim kit; and QU90009 axle service pack. Contains USA and imported parts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Parts (Open)

top_page
product note
Differential problems with Dana 60 rear axles are not all that common. But Murphy, of Murphy's Law* really likes busted differentials, so when you hear that loud, heart-stopping, ominous BANG from the rear axle as your truck lurches to a grinding stop, you just KNOW it is one big dose of bad news. To help get you back on the road after you get rescued, we stock genuine original equipment Dana-Spicer Front Axle Differential Parts for your hard working Ford truck.
*Murphy's Law: "Anything that can go wrong, will go wrong"
photo
QU40518 Differential Pinion Mate Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each pinion mate gear and the differential case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40041 Differential Side Gear Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each side gear and the differential case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40520 Differential Cross Shaft for Open Differentials
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40519 Lock Pin for Differential Cross Shaft For Open Differentials is used to lock QU40520 differential cross shaft to the diff case
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets and Gasket Maker

top_page
product note
In the mid 1970's Dana made a differential cover design change to heavy gauge covers with flat mating flanges. Unlike the previous, thin gauge covers with embossed flanges which were made for use with a cut gasket, the new design, thick gauge covers are designed for sealing with RTV. If you desire, you can still use a gasket with the new type cover by combining the gasket with thin films of RTV. We stock both Ultra Gray RTV Sealant and genuine Dana Gaskets.
photo
QU40367 Rear Differential Cover Gasket For Model 70 Axles. These genuine Dana-Spicer gaskets will also work on your Ford Dana 60 rear axle. Dan the Gear Man Tech Note: RTV sealant instead of Gaskets were used during the factory assembly of your axle
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40078 Ford Dana 60 Rear Axle shaft Flange Gasket To prevent oil leaks, your Axle Shaft Flange Gaskets should be replaced anytime the axle is removed. These embossed steel gaskets are genuine Dana-Spicer parts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes. The perfect choice to seal the differential cover on your Ford Dana 60
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
photo
QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo
QU40577 Tapered Locking Bushing Cone for Dana 60 Rear Axle Shafts Fits those 1973-1979 Ford Dana 60 rear axles with 7/16" axle shaft drive studs. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.

Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing

Link to QU40577 Large Text Individual Product Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindle Nuts and Spindle Hardware

top_page
product note
Spindle Nuts have two functions and they are to provide for correct wheel bearing adjustment and to keep your wheel hubs in place. We stock both the original equipment double spindle nuts and tab lockwasher for your vintage Ford
photo
QU20017 Spindle Lock Washer with Bend Over Tabs Fits all 1973-1979 F250 and F350 trucks with double rear 2-9/16" rounded hex spindle nuts and 2" Spindle Threads
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU20018 Ford 2-9/16" Spindle Lock Nut for Dana Rear Axles Is a Ford original equipment spindle lock nut for all 1973-1979 F250 and F350 trucks with double rear 2-9/16" rounded hex spindle nuts, and 2" spindle threads
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearings and Seals (Individual)

top_page
product note
On Dana 60 rear axles, Ford used the same inner and outer wheel bearings on 1973-1979 F-250 trucks and 1979-1979 E200/E250 Vans with full floating Dana 60 rear axles. F350 and Single Rear Wheel E350 Vans have the same outer wheel bearings as the F-250, but larger inner wheel bearings and seals. All F-250 3/4 ton trucks and many E200/E250 vans had Dana 60 full float rear axles. E/F350 series vehicles were built with both Dana 60 and Dana 70 rear axles. but the 1 ton SRW wheel bearings are the same for either axle
photo
QU50411 Timken® F250/E250 Inner/Outer Wheel Bearing Cup For all 1973-1979 Ford F-250, E200, E250 Dana 60 full float rear axles. Use 2 per side
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50412 Timken® F250/E250 Inner/Outer Wheel Bearing For all 1973-1979 Ford F-250, E200, E250 Dana 60 full float rear axles. Use 2 per side
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90001 1973 to 1979 Inner Wheel Seal for Ford F250/E200/E250 Dana 60 Rear Wheel Hub Fits all Dana 60 full floating rear axles in 1973 to 1979 Ford F-250 3/4 ton trucks and 3/4 ton E-series vans.

Link to our QU90001 Catalog Page
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50396 F350, E350 Timken® Inner Wheel Bearing Cup For 1973-1979 Ford F-350 trucks and E300/E-350 SRW Vans with full floating Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50399 F350, E350 Timken® Inner Wheel Bearing For 1973-1979 Ford F-350 trucks and E300/E-350 SRW Vans with full floating Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40449 Inner Wheel Seal for F350 and E350 Is a genuine original equipment Seal for all 1973 to 1979 F-350 trucks and 1973-1979 E300/E-350 Vans with full floating Dana 60 rear axles
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing and Seal Kits

top_page
product note
The rear wheel bearings in 1973-1979 Ford Dana 60 Rear axles average about 125, 000 to 150, 000 miles before requiring replacement. Torque King® Premium Rear Wheel Bearing and Seal Kits for your Ford feature premium Timken® bearings and original equipment quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls. To help you install these vital components properly, Torque King® Master Kits include bearing cup and wheel seal installers. Why use makeshift installation methods that can damage precision surfaces when affordable tools are available to do the job right the first time?
photo
TK8303F 1973-1979 Torque King® Master Rear Wheel Bearing & Seal Kit with Tools For 1973-1979 F250 3/4 Ton Dodge Trucks or 1973-1979 Ford E300/E350 Vans with Dana 60 full floating rear axles. Kit includes Seal and Bearing Cup Installation Tools, Timken® Wheel Bearings, Original Equipment Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.

Link to our TK8303F Catalog Page
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK8320F 1973-1979 Parts Only Torque King® Premium Rear Wheel Bearing & Seal Kit for 1973-1979 F250 3/4 Ton Ford Trucks or 1973-1979 Ford E300/E350 Vans with Dana 60 full floating rear axles. Kit includes Timken® Wheel Bearings, Original Equipment Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.

Link to our TK8320F Catalog Page
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Hubs

top_page
product note
Ford used two different wheel hubs for 1973-1979 Dana 60 Rear Axles
QU20394U Used Rear Wheel Hub for 1973-1978 F250 Is a good used bare Rear Wheel Hub for all 1973-1978 Ford F250 4x2 or 4x4 trucks built before September 18, 1978
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!