Parts for Dana-Spicer Model 60 and Model 61 Rear Axles in 1980-up Ford Trucks

Differential and Pinion Bearings (Individual)

top_page
product note
Over the years, Dana has primarily used Timken bearings when building their axles. For long life and dimensional consistency, Timken bearings are unmatched by any other brand of bearing I have used rebuilding axles over the past 30+ years in the business. When you are a shade tree mechanic dealing with a diff and pinion rebearing job without all the fancy gauging tools we have, you always want your new bearings to be the same overall thickness as the original bearings were when the axle was built so your pinion depth, pinion preload and backlash are within the tolerance limits when you are done with the job. Timken bearings will almost always deliver that type of accuracy, plus the steel quality and surface finish is the world's best
photo

QU50397 Differential Bearing Cup For Dana Model 60 Rear Axles in 1980-1997.5 Ford F-250 trucks and E-250, E-350 vans

photo

QU50398 Differential Bearing For Dana Model 60 Rear Axles in 1980-1997.5 Ford F-250 trucks and E-250, E-350 vans

photo

QU50400 Outer Pinion Bearing Cup For Dana Model 60 Rear Axles in 1980-2002 Ford F-250 trucks and E-250, E-350 vans

photo

QU50401 Outer Pinion Bearing For Dana Model 60 Rear Axles in 1980-2002 Ford F-250 trucks and E-250, E-350 vans

photo

QU50406 Inner Pinion Bearing Cup For Dana Model 60 Rear Axles in 1980-2002 Ford F-250 trucks and E-250, E-350 vans

photo

QU50407 Inner Pinion Bearing For Dana Model 60 Rear Axles in 1980-2002 Ford F-250 trucks and E-250, E-350 vans

Differential Bearing Kits

top_page
photo

QU50491 Ford Dana 60 Differential Bearing and Seal Kit For your 1980-1985 Ford F-250 trucks and 1980-1997.5 E-250, E-350 vans with Dana 60 and Dana 61 rear axles. This kit includes: QU50400 Outer Pinion Bearing Cup, QU50401 Outer Pinion Bearing, QU50406 Inner Pinion Bearing Cup, QU50407 Inner Pinion Bearing, 2 QU50397 Differential Bearing Cups, 2 QU50398 Differential Bearings; QU51065 early and QU50565 late, aftermarket pinion seal; QU50566 aftermarket pinion nut, QU50567 aftermarket differential and pinion shim kit; and QU90009 axle service pack. Contains USA and imported parts

Miscellaneous

top_page
photo

QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound

Small Parts

top_page
photo

QU40287 Differential Shim Kit For Ford Semi-Float Dana 60 and Dana 61 Rear Axles

photo

QU40082 Differential Shaft Lock Bolt for 1980-up Ford Dana 60 and Dana 61 Semi-Float rear axles.

More Info

Spindle Nuts and Spindle Hardware

top_page
tech note
Dan the Gear Man® Tech Note: QU40077 Spindle Nuts and QU40089 Spindle Lock Wedges are "Single Use", genuine Ford and Dana Spicer original equipment components. These parts are designed to be installed once and only once. For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts loose a percentage of their resistance to coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused. I am not aware of a single instance of a properly installed new nut and wedge coming off like that. In my opinion, the original equipment nut design is as safe to use as our double nut sets sold above as long as you follow the rules
photo

QU40077 Locking Rear Spindle Nut for Model 60 and 61 Rear Axles Is a genuine original equipment, single use, replacement spindle nut for those 1980 to 1987 Ford trucks with full float Dana-Spicer Model 60 or 61 rear axles using right hand thread elastic stop type spindle nuts. Use with QU40089. See Tech Note Below!

photo

QU40089 Spindle Nut Lock Wedge for Model 60 and 61 Rear Axles Is a genuine original equipment, single use, replacement Lock Wedge that is designed to prevent QU40077 Spindle Nut from backing off. See Below!

Wheel Bearings and Seals, Semi Float (Individual)

top_page
photo

QU11032 Rear Wheel Bearing For 1980-up Ford Dana 60 and Dana 61 semi-float rear axles