Parts for Ford 8.8" and Smaller Semi-Float Rear Axles in Ford Trucks and SUVs

Differential and Pinion Bearings (Individual)

top_page
photo
QU50578 Differential Bearing for 1990-2011 Ford Ranger, 1991-2001 Ford Explorer, 1983-2014 Ford F150, 1983-1996 Ford Bronco, and 1997-2002 Ford Explorer with 8.8" Ford Rear Axles. Use 2 per application

Link to QU50578 Individual page for detailed information

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50966 Differential Bearing Cup For 1990-2011 Ford Ranger, 1991-2001 Ford Explorer, 1983-2014 Ford F150, 1983-1996 Ford Bronco, and 1997-2002 Ford Explorer with 8.8" Ford Rear Axles. Use 2 per application. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50405 Inner Pinion Bearing For 1990-2006 Ford Ranger, 1991-2001 Ford Explorer, 1983-2006 Ford F150, 1983-1996 Ford Bronco, and 1997-2002 Ford Expedition with Ford 8.8" Rear Axles.

Link to QU50405 Individual page for detailed information
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50404 Inner Pinion Bearing Cup for 1990-2006 Ford Ranger, 1991-2001 Ford Explorer, 1983-2006 Ford F150, 1983-1996 Ford Bronco, and 1997-2002 Ford Expedition with Ford 8.8" Rear Axles

Link to QU50404 Individual page for detailed information

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50605 Outer Pinion Bearing for 1990-2006 Ford Ranger, 1991-2001 Ford Explorer, 1983-2006 Ford F150, 1983-1996 Ford Bronco, and 1997-2002 Ford Expedition with Ford 8.8" Rear Axles

Link to QU50605 Individual page for detailed information

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50604 Outer Pinion Bearing Cup for 1990-2006 Ford Ranger, 1991-2001 Ford Explorer, 1983-2006 Ford F150, 1983-1996 Ford Bronco, and 1997-2002 Ford Expedition with Ford 8.8" Rear Axles

Link to QU50604 Individual page for detailed information

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50970 Application Specific Original Equipment Matched Koyo Inner Pinion Bearing Set for most 2007-2011 Ford 8.8" rear axles. Note: This set has a special bearing angle and the cup/cone must be replaced as a set. This is NOT interchangeable with Timken® standard bearings. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50971 Application Specific Original Equipment Matched Koyo Inner Pinion Bearing Set for 2009-up Ford F150 8.8" rear axles. Note: This set has a special bearing angle and the cup/cone must be replaced as a set. This is NOT interchangeable with Timken® standard bearings. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU51023 Timken® Outer Pinion Bearing Cup for many 2007 and newer Ford 8.8" axles. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU51029 Timken® Outer Pinion Bearing for many 2007-up Ford 8.8" rear axles. More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets

top_page

QU42033 Reuseable USA Made High Performance Rear Differential Cover Gasket for 1985-up Ford 8.8" rear axles.
More Info

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
photo
QU90009 Universal Axle Service Pack is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound

Link to QU90009 Individual page for detailed information

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Seals and Yokes

top_page
photo

QU50264 Flanged Pinion Seal for 8.8" Rear Axles Is a high quality triple lip Pinion Seal that features hydrodynamic inner lip, center lip and outer wiper lip to exclude water and road debris.
More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo
QU20000 Collapsible Pinion Preload Spacer (Crush Sleeve) is a single-use component that fits many Ford Corporate Rear Axle applications. Genuine original equipment part will collapse as you tighten the pinion nut until you reach the desired pinion rotating preload. Made in U.S.A.

Please refer to QU20000 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU20003 Pinion Slinger Fits many Ford Corporate Rear Axle applications. Genuine original equipment part fits between the Pinion Yoke and Outer Pinion Bearing. Made in U.S.A.

Please refer to QU20003 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU20005 Pinion Nut for Ford 8.8" and 9" rear axles is a genuine original equipment part

Link to QU20005 Individual page for detailed information

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU51081 Ring Gear Bolt for Ford 8.8" axles.
More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearings and Seals (Individual)

top_page
product note

Ford 8.8" and smaller Rear Axles are of the semi-floating type in which the differential and a single straight roller bearing support each axle shaft. Each axle shaft is held in place by a C-Clip located at the inboard end of the axle shaft.

photo
QU50213 Axle Shaft Bearing for Ford 8.8" Rear Axles in 1980 and newer Ford Large SUVs, pickups, and vans up to light duty 3/4 ton models.

Link to QU50213 Individual page for detailed information

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!