Parts for 1983 to 1997 Ford Bronco II and Ranger Dana 28 IFS Front Axles

Axle Housings

top_page

QU20569U Used Ford Dana 28IFS Right Axle Beam for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II 4x4 front axles.

QU20570U Used Ford Dana 28IFS Left Axle Beam for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II 4x4 front axles.

Axle Shafts and Axle Shaft Small Parts

top_page
photo

QU40100 Axle Shaft Snap Ring For 1990 and newer Ford Bronco II, Explorer, and Ranger with Dana 28 IFS 27 spline front 4x4 outer axle shafts

QA20487R Recon Right Axle Shaft Assembly with New U-Joint for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28IFS front axles.

QA20488R Recon Left Axle Shaft Assembly with New U-Joint for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28IFS front axles.

Brake Parts

top_page

QU20565U Used Right Brake Shield for 4x4 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II

QU20566U Used Left Disc Brake Shield for 4x4 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28IFS front axles.

QU20568U Used Round Inner Disc Brake Shield for 4x4 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28IFS front axles.

Differentials and Differential Parts

top_page

QU20563U Used Loaded 23 Spline Open Differential Case Assembly for 3.08 and 3.45 gear ratios in 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II 4x4's.

QU20558U Used Aluminum Differential Housing with Bearing Caps for 1983-1989 Ford Ranger 4x4 and 1984-1989 Ford Bronco II Dana 28IFS front axles.

QU20559U Used Right Differential Output Shaft for 1983-1989 Ford Ranger 4x4 and 1984-1989 Ford Bronco II Dana 28IFS front axles.

Hub and Hub parts

top_page

QU20567U Used 4x4 Front Hub and Rotor for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28IFS front axles.

QU20376U Used 23 Spline Manual Lock Out Hub for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28IFS front axles.

Pinion Yokes

top_page

QU20562 Used 1310 Series Dana 28IFS 23 Spline Pinion Yoke for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II 4x4 front axles.

Ring and Pinion

top_page

QU20564U Used 3.45 Ratio Ring and Pinion Set for Dana 28IFS front axles in 1984-1989 Ford Bronco II and 1983-1989 Ford Ranger.

Slip Yokes

top_page

QU20560U Used Right Axle Shaft Slip Yoke for 1983-1989 Ford Ranger 4x4 and 1984-1989 Ford Bronco II Dana 28IFS front axles.

Small Parts

top_page
photo

QU20093 27 Spline, 3 Piece Axle Shaft Thrust Washer Set Is an exact replacement for automatic hub equipped, 1995-1997 Ford Bronco II and Ranger with Dana 28 IFS front axles. QU20093 can also be used to replace discontinued QU40101 one piece thrust washer on 1993-1994 axles

Spindle Bearings and Seals

top_page
photo

QU40145 1983-1989 Spindle Bearing For 1983-1989 Ranger Pickup and 1984-1989 Bronco II with Model 28 Axle

photo

QK4734 Front Axle Shaft Spindle Bearing Set Fits all 1990-1994 Ford Ranger Dana 28 IFS Front Axles. One bearing is pressed into each spindle to support the outer axle shaft

photo

QU40438 1983-1989 Ford Dana 28 IFS Front Axle Spindle Bearing and Seal Kit Includes genuine original equipment spindle bearing, spindle seal, and axle shaft thrust washer to service ONE Spindle. Fits 1983 to 1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28 Independent Front Suspension (IFS) front axles

photo

QU40436 1993-1994 Ford Dana 28 IFS Front Axle Spindle Bearing and Seal Kit Includes genuine original equipment spindle bearing, spindle seal, and axle shaft thrust washer to service ONE Spindle. Fits 1993 to 1997 Ford Ranger Dana 28 Independent Front Suspension (IFS) front axles

photo

QU40459 1993-1994 Press On Axle Shaft to Spindle Seal Is a genuine original equipment seal that is installed on your outer axle shaft

Spindles and Spindle Nuts

top_page
photo

QU40631 1995-1997 Dana 28 Front Spindle Is a bare front spindle for 1995-1997 Ford Dana 28 IFS front axles with 4 wheel ABS

QU20555U Used Bare Spindle for 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28IFS front axles.

photo

QK4768 1983-1989 Ford Dana 28IFS Front Spindle Nut Kit Is a genuine Dana original equipment 3 piece Spindle Nut Set for 1983-1989 Ranger Pickup and 1984-1989 Bronco II with Dana 28IFS Axles and 23 Spline Manual Locking Hubs. Fits 38mm spindle thread

Also available while supplies last QK4768U

photo

QU40121 1983-1989 Ford Dana 28IFS Front Axle Inner Spindle Nut w/ Pin Is a genuine Dana original equipment Inner Spindle Nut for 1983-1989 Ranger Pickup and 1984-1989 Bronco II with Model 28 Axle and 23 Spline Manual Locking Hubs

photo

QU40282 1983-1989 Ford Dana 28IFS Front Spindle Nut Lock Washer Is a genuine Dana original equipment Lock Washer for 1983-1989 Ranger Pickup and 1984-1989 Bronco II with Model 28 Axle and 23 Spline Manual Locking Hubs

photo

QK4769 1993-1997 Ford Dana 28IFS Spindle Nut Kit Is a genuine Dana original equipment 3 piece Spindle Nut Set for 1993-1997 Ranger Pickup with Dana 28IFS Front Axles and 27 Spline Manual Locking Hubs. Fits 1-5/8" spindle thread

Steering Parts

top_page

QU20556U Used Right Hand Steering Knuckle for 1983-1989 Ford Ranger 4x4 and 1984-1989 Ford Bronco II Dana 28IFS front axles.

U-Joints

top_page

QU42074 Non-Greaseable 1210WJ Series Axle Shaft Universal Joint for Ford Ranger and Ford Bronco Dana 28IFS front axles.

Wheel Bearings (Individual)

top_page
product note

The inner and outer wheel bearing and seals are different for 1983-1989 era Ford and 1993-1997 era Ford Dana 28IFS Twin Traction Beam® Front Axles

photo

QU50447 1983-1989 Timken® Wheel Bearing Cup For 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28 Independent Front Suspension (IFS) front axles. Uses two cups per side. Uses two bearings per side

photo

QU50448 1983-1989 Timken® Wheel Bearing For 1983-1989 Ford Ranger and 1984-1989 Ford Bronco II Dana 28 Independent Front Suspension (IFS) front axles

photo

QU50577 1993-1997 Timken® Wheel Bearing Cup For 1993-1997 Ranger Dana 28 Independent Front Suspension (IFS) front axles. Uses two cups per side

photo

QU50578 1993-1997 Timken® Wheel Bearing For 1993-1997 Ranger Dana 28 Independent Front Suspension (IFS) front axles. Uses two bearings per side

photo

QU90001 1993-1994 Front Wheel Seal for Ford Dana 35IFS Front axles is a high quality oil and grease seal with a garter spring plus an outer wiper lip that fits 1993 to 1994 Ford Ranger Dana 28 Independent Front Suspension (IFS) front axles.

Link to our QU90001 Catalog Page