Front Constant Velocity Driveshaft Parts for 1987 to 1997 Ford F-350 4x4s

Parts Page for 1987-1997 Ford F-350 Non-Greaseable Front CV Driveshafts

Constant Velocity Parts

top_page
product note
We stock a complete line of original equipment quality replacement parts for rebuilding your Ford F-350 Front Driveshaft Double-Cardan Constant Velocity (CV) Joint. The Constant Velocity parts are the same for all 1985 to 1997 Ford F-350 4x4 trucks
photo
QU40757 CV Centering Yoke for Ford F-350 Fits all 1987-1997 Ford F-350 Double Cardan Front CV Driveshafts
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40759 Front Driveshaft CV Center Yoke for 1985-1997 Ford F-350 Is the H shaped double yoke that joins your CV joint's inner and outer universal joints on your Ford F-350 Front Double Cardan Constant Velocity Driveshaft
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40744 Front Driveshaft CV Centering Ball Kit for 1985-1997 Ford F-350 Front driveshaft Double-Carden Driveshaft Constant Velocity Joints. If your cast iron CV Centering Yoke is in good shape, you can save $$ by just replacing your old Centering Ball and Socket with this Kit
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40704 CV Outer Dust Seal For 1987-1997 Ford F-350 front driveshaft Double-Carden Driveshaft Constant Velocity Joints. This seal helps protect the CV Centering Ball from road splash and should be replaced any time the u-joints are changed
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40829 1999-2004 Ford F-350 Replacement CV Grease Seal For 1987-1997 Ford F-350 with Front Double-Cardan CV Joint. This part is included in QU40744 Ball Kit and is part of QU40757 CV Flange
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40835 1985-1997 Ford F-350 Front Replacement CV Tension Spring For 1985-1997 Ford F-350 with Front Double-Cardan CV Joint. This part is included in QU40744 Ball Kit and with QU40757 CV Centering Yoke
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
photo
QU90018 Pyroplex® Protection ES Synthetic Grease Provides extended service protection under the harshest on and off road conditions! This new NLGI #2 GC-LB grease is Hydro-Activated™ to become tackier when exposed to moisture. Offers superior corrosion and wear protection in a variety of environments. Provides excellent low and high temperature performance. Use to lubricate the CV Ball and Slip Yoke prior to assembly and for your greaseable universal joints
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S9978 Blue 242 Threadlocker Is used on the bolt treads that attach your driveshaft to the transfer case and front axle
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S9975 Anti-Seize Lubricant Will keep the CV flange from rusting to the transfer case output flange when applied the the male-female pilot that centers the shaft flange to the output flange
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
product note
Most CV and universal joint service is done using makeshift tools and hammering on the parts until something gives service methods. Driveshaft parts and universal joints are incredibly precise components that can be easily damaged by such slam-bang work. There is a better way to perform driveshaft service using application specific press tooling and approved service procedures. Yeah, I know the Manuals and Tools are expensive, but when you consider that a poorly installed front u-joint blowing out as you tool down the Interstate at 75 is going to cause an expensive and dangerous mess. I have witnessed several driveshaft failures in vehicles driving ahead of me during my travels and I can tell you a 3' long front driveshaft can do a heck of a lot of damage as it whips around jamming into the road, whacking the transmission, and smashing the floor!
photo
QT1065 Series Long Throat C-Frame Ball Joint Presses Are designed to accept a variety of interchangeable tooling for performing Ball Joint and Universal Joint service on your 4x4. A heavy-duty tool that will get the job done when used with the appropriate tooling for your big Ford F-350.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT4008 Medium Size U-Joint Separator Yoke Is used with a QT1065 series C-frame Press and QT4016 Press Anvil to easily remove the 3 universal joints on 1985 to 1997 Ford F-350 4x4 Double-Cardan Constant Velocity front driveshafts and 4x4 front axle shafts. By placing the press force against the u-joint cross, the amount of pressure needed to break a cup free is halved and the chances of damaging the yokes is greatly reduced. Works on rusted in or tight fitting u-joints
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT4010 1" Press Tip Is used with a QT1065 series C-frame Press and QT4016 Press Anvil to easily install universal joints with 1-1/16" to 1-3/16" diameter cups on most common light truck driveshafts and 4x4 front axle shafts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT4014 1-1/16" Capacity U-Joint Press Anvil Used with a QT1065 series C-frame Press and either QT4008 Medium U-Joint Separator Yoke or QT4010 1" Press Tip to easily remove and install the two universal joints from all 1994-2002 Dodge Ram front driveshaft CV Joints and front universal joint on 1985 to 1997 Ford F-350 4x4s
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QT4016 1-1/16" to 1-3/16" Capacity U-Joint Press Anvils Used with a QT1065 series C-frame Press and either QT4008 Medium U-Joint Separator Yoke or QT4010 1" Press Tip to easily remove and install all three universal joints from any stock type 1985 to 1997 Ford F-350 4x4 front driveshaft
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Universal Joints

top_page
photo
TK40721 Torque King ® Premium Quality U-Joint for 1985-1997 Ford F-350 Front Driveshaft CV Head, cold-forged, alloy steel, non-greaseable factory synthetic-lubed, universal joint with four external snap rings for the Constant Velocity Joint.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40774 Greaseable External Snap Ring U-Joint for 1985-1997 Ford F-350 Front Driveshaft CV Head Hot-forged, alloy steel, greaseable u-joints with nitrile rubber seals for the Constant Velocity Joint with 4 external snap rings. Two of these joints are used in the CV Joint (upper or transfer case end of shaft)
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK40723 Torque King® 1330F Series Premium Quality Universal Joint Is a cold-forged, alloy steel, non-greaseable factory synthetic-lubed, driveshaft universal joint with two external snap rings for replacing your front driveshaft, front universal joint that attaches to the front axle pinion yoke on 1985-1997 Ford F-350 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40903 1330F Series Greaseable Driveshaft Universal Joint This is a very good quality American made greaseable universal joint with nitrile rubber seals and a hot-forged cross for replacing your front driveshaft, front universal joint that attaches to the front axle pinion yoke on 1985-1997 Ford F-350 4x4 trucks
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!