Tools, Specific for Ford

Axle Universal Joint Tools

top_page
photo

QT4009 Large Size U-Joint Separator Yoke Is used with a QT1065 series C-frame Press and QT4015 Press Anvil to easily remove 1-3/8" diameter cup size universal joints.

Link to QT4009 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT4010 1" Press Tip Is used with a QT1065 series C-frame Press and QT4016 Press Anvil to easily install universal joints with 1-1/16" to 1-3/16" diameter cups.

Link to QT4010 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT4011 1-1/4" Press Tip Is used with a QT1065 series C-frame Press and QT4015 Press Anvil to easily install universal joints with 1-3/8" diameter cups.

Link to QT4011 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT4014 1-1/16" Capacity U-Joint Press Anvil Used with a QT1065 series C-frame Press and either QT4008 Meduim U-Joint Separator Yoke or QT4010 1" Press Tip to easily remove and install Spicer 1310 and 1330 series universal joints with 1-1/16" cups. Superseded by QT4016.

photo

QT4015 1-3/8" Capacity U-Joint Press Anvil Used with a QT1065 series C-frame Press and either QT4009 Large U-Joint Separator Yoke or QT4011 1-1/4" Press Tip to easily remove and install 1480 and 1485 series universal joints.

Link to QT4015 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT4016 1-1/16" to 1-3/16" Capacity U-Joint Press Anvils Used with a QT1065 series C-frame Press and either QT4008 Medium U-Joint Separator Yoke or QT4010 1" Press Tip to easily remove and install most popular automotive axle shaft and driveshaft universal joints up to 4-3/16" overall width.

Link to QT4016 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joint Tools

top_page
photo

Please See Our Ball Joint Tools Page for Ordering and Information on Tool Sets for Damage Free Installation and Removal of Your Ball Joints! Please See Our Ball Joint Tools Page for Ordering and Information on Tool Sets for Damage Free Installation and Removal of Your Ball Joints!

Differential and Pinion Set Up Tools

top_page
photo

QT1032 Differential Case Spreader For Dana-Spicer Axles Dana Axles are designed to have a differential bearing preload of .010"-.015". With our Case Spreaders, removing and installing front and rear differentials on your 4x4 is much easier and will help prevent damage to those expensive differential components

Link to QT1032 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1035 Differential Press Step Plate For Dana 44, Dana 50, and Late Ford 9" axles. QT1035 is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your differential. Use as a push plate for bearing removal or to support the differential when pressing on new bearings. Made in U.S.A.

Link to QT1035 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1036 Differential Press Step Plate For Dana 25, Dana 27, Dana 30, GM 10 Bolt, and early Ford 9" axles. QT1036 is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your differential. Use as a push plate for bearing removal or to support the differential when pressing on new bearings. Made in U.S.A.

Link to QT1036 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1088 Press Step Plate for Differentials For Dana 60, Dana 70, Dana 70HD, Ford 10.25", Ford 10.5", GM 14 bolt axles is used when pulling and/or installing your differential bearings. These plates fit in the axle shaft hole of your differential. Use as a push plate for bearing removal or to support the differential when pressing on new bearings. Made in U.S.A.

Link to QT1088 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearing Installers

top_page
photo

QT1003 Inner Pinion Bearing Installer For Dana-Spicer Model 70 or other applications that require installing bearings with 1-5/8" to 1-3/4" inside diameters on long shafts. Steel construction with Black Oxide finish. Made in U.S.A.

Link to QT1003 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1004 Inner Pinion Bearing Installer For Dana-Spicer Model 80 and AAM/GM 11.5" Axles or other applications that require installing bearings with 1-7/8" to 2" inside diameters on long shafts. Steel construction with Black Oxide finish. Made in U.S.A.

Link to QT1004 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1044 Inner Pinion Bearing Installer For Dana 44, Dana 50 front/rear drive axles or other applications that require installing bearings with 1-3/8" inside diameters on long shafts. Steel construction with Black Oxide finish. Made in U.S.A.

Link to QT1044 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1158 Differential Bearing Installer Features a raised internal ring that contacts the bearing inner face so you can press or drive your diff bearings on without damaging the cage.

Link to QT1158 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT2005 1-5/8" Capacity Bearing Installer for Transmissions and Axles This is our most popular Pinion and Transmission Bearing Installer.

Link to QT2005 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearing Removers

top_page
photo

QT9302 5 Pound Slide Hammer A necessity to remove many bearings and seals when servicing axles, transmissions, and transfer cases. Superseded by QT9308.

QT9308i Slide Hammer Puller Set with storage case. Includes slide hammer with multiple attachments including 2/3 jaw, internal and external pullers, rear axle puller, locking pliers adapter, puller hook, and dent puller.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hub Tools

top_page
photo

QT9205 Torx® Socket Bit for NV4500HD Output Shaft Nut and Ford Super Duty Hub-Locks ¼" drive socket is used to adjust the lock bolt in the Original Equipment split output shaft nut.

Link to QT9205 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Inner Axle Oil Seal Installers

top_page
photo

Please See Our Axle Seal Tool Page for Order and Information for Inner Axle Seal Installers and Removers! Please See Our Axle Seal Tool Page for Order and Information for Inner Axle Seal Installers and Removers!

Inner Axle Oil Seal Removers

top_page
photo

Please See Our Axle Seal Tool Page for Order and Information for Inner Axle Seal Installers and Removers! Please See Our Axle Seal Tool Page for Order and Information for Inner Axle Seal Installers and Removers!

King Pin Tools

top_page
photo

QT1064 King Pin Socket for Dana 60 Front Axles Removes and installs the upper king pin cones on Model 60 front axles found on many ¾ and 1 ton trucks from 1975 to 1993. Both the 3/4" drive socket and hex bit are professional quality tools designed for impact use.

Link to QT1064 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4550 Dana 60 and Dana 61 Upper King Pin and Wrench Set Includes QT1064 3/4" Drive Impact Socket/Hex Bit Socket, 2 genuine Dana Spicer QU40266 Upper King Pins, and S9979 High Strength Threadlocker.

Link to QK4550 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Knuckle Seal Installers

top_page
photo

QT1515 Axle Shaft to Knuckle Seal Installer for Ford Excursion and 1999-2004 Ford Super Duty Easily installs those fragile, expensive axle shaft to knuckle seals on your outer axle shaft and is also used to seat the seal and shaft assembly into the steering knuckle to the correct depth.

Link to QT1515 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1530 Knuckle to Axle Shaft Seal Installer for 2005-up Ford Super Duty® F-250, F350 4x4 Trucks Use to install those easily damaged and expensive axle shaft to knuckle seals on your outer axle shaft. TS1530 is also used to correctly seat the seal and shaft assembly into the steering knuckle at the correct depth. Heavy duty, CNC precision machined tools are built to last. TS1530 works on 2005 and newer F250 and F350 trucks.

Link to TS1530 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

TS1531 Knuckle to Axle Shaft Seal Installer for 2005-up Ford Super Duty® F-450, F550 4x4 Trucks Use to install those easily damaged and expensive axle shaft to knuckle seals on your outer axle shaft. TS1531 is also used to correctly seat the seal and shaft assembly into the steering knuckle at the correct depth. Heavy duty, CNC precision machined tools are built to last. TS1531 works on 2005 and newer F450 and F550 trucks.

Link to TS1531 Catalog Page

* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Manuals and Technical Information

top_page
photo

Please See Our Ford Excursion and Super Duty Publications Web Page! Please See Our Ford Excursion and Super Duty Publications Web Page!

photo

Please See Our Ford Manuals Page! Please See Our Ford Manuals Web Page!

Spindle Nut Sockets

top_page
photo

QT1012 4 Lug 4x4 Front Spindle Nut Socket Fits 4 slot spindle nuts used on many axles from the late 1950's to 1996 including Dana 28IFS, Dana 30, Dana 35IFS, Dana 44, Dana 44IFS, Dana 60, and GM 10 Bolt front axles. Services both double nut and Ford rachet type single nut configuriations. Made in U.S.A. Also see catalog page for a more affordable, imported socket.

Link to QT1012 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1018 Large 4 Prong Spindle Nut Socket Fits Dana 50 and 60 axles with 4 slot spindle nuts and serviceable wheel bearings from 1981-1997. Thick wall design, ½" drive socket works on both double nut and Ford style single ratchet type nuts. Made in U.S.A. Also see catalog page for a more affordable, imported socket.

Link to QT1018 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1019 Rear Spindle Nut Socket for Ford F-250, F-350 Ratchet Type Spindle Nuts Has a pilot shaft that slips inside the rear spindle to keep the socket centered on the nut. Made in U.S.A. Also see catalog page for a more affordable, imported socket.

Link to QT1019 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1025 Universal 4 Lug/6 Lug Front or Rear Spindle Nut Socket Fits all 6 slot Dana Spicer 50/Model 60 front axles and most 4 slot Dana Spicer Model 30/Model 44 or GM 10 bolt front spindle nuts on Chevy, Dodge, Ford, GMC, IHC, and Jeep front axles.

Link to QT1025 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1057 Medium Rounded Hex Spindle Nut Socket Fits 1995 and 1996 Ford F-150 and Full Size Bronco with factory installed automatic locking hubs. 1/2" Drive. Made in U.S.A. Also see catalog page for a more affordable, imported socket.

Link to QT1057 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1058 Large Rounded Hex Spindle Nut Socket fits 1985 to1997 Ford F-250 and F-350 4x4 trucks with with factory installed automatic locking hubs. 1/2" Drive. Made in U.S.A. Also see catalog page for a more affordable, imported socket.

Link to QT1058 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1059 Small Rounded Hex Socket Removes and installs the spindle nuts on 1984-1992 Ford Ranger and Bronco II 4x4's equipped with factory automatic locking hubs. Made in U.S.A. Also see catalog page for a more affordable, imported socket.

Link to QT1059 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1110 Heavy Duty 4 Prong Spindle Nut Wrench for Dana 50 and Dana 60 Front Axles Fits Dana Spicer 50, 60, and 61 front drive axles with 4 slot double spindle nuts (QK4729) and serviceable wheel bearings from 1981-1997. Made in U.S.A. Also see catalog page for a more affordable, imported socket.

Link to QT1110 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindle Removers

top_page
photo

QT1023 4x4 Triple Standard Thread Spindle Puller Fits any 5/8" Slide Hammer to quickly and easily remove those rusted in front wheel bearing spindles on your 4x4 without damage! Essential for servicing axle u-joints, ball joints, spindle bearings, inner axle seals, and differentials on most domestic 4x4s with serviceable wheel bearings.

Link to QT1023 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1024 4x4 Triple Metric and Standard Thread Spindle Puller Fits any 5/8" Slide Hammer to quickly and easily remove those rusted in front wheel bearing spindles on your 4x4 without damage! Essential for servicing axle u-joints, ball joints, spindle bearings, inner axle seals, and differentials on any domestic 4x4 with serviceable wheel bearings.

Link to QT1024 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Transmission Tools

top_page
photo

QT3012 Clutch Tool Fits almost all Ford 6 cylinder and small block V8 applications in Broncos and F series pickups from 1965 to present with 3, 4, or 5 speed transmission. Also fits 6.9l Diesel 1983-1987 and all 460's with 4 speed transmission. 1-1/16", 10 spline with .670" pilot.

Link to QT3012 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Universal Tools

top_page
photo

QT1200 Tie Rod Separator Separates most tie rods, drag links, & track bars without damaging the stud or seal with this rugged puller.

Link to QT1200 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT2013 NP205 Transfer Case Dummy Shaft Is required to hold the idler shaft bearings, shims, and sleeve together when removing or installing the idler shaft on New Process 200, 201, and 205 transfer cases. Made in U.S.A.

Link to QT2013 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing Cup Installers

top_page
photo

Please See Our Bearing Cup Installers Web Page for Ordering and Information! Please See Our Bearing Cup Installers Web Page for Ordering and Information!

Front Inner Wheel Bearing Cup Installer Applications:
QT1803
1959-1986 Bronco, F100, F150 with model 30 & 44 axles
QT1803
1987-1991 Bronco, F-150
QT1801
1987-1991  Bronco, F-150
QT1803 1992-1996 Bronco, F150
QT1803 1959-1976 F-250 with internal spline hub & model 44 axle
QT1805 1959-1977½ F-250 with external 6 bolt hub
QT1801 1976½-1997 F-250 with model 44 axle (internal spline hub)
QT1804 1977½-1997 F-250, F350 with Model 50 and 60 front axles

Front Outer Wheel Bearing Cup Installer Applications:
QT1802
1959-86 Bronco, F100, F150
QT1801
1987-1991  Bronco, F-150
QT1802 1987-1996 Bronco, F150
QT1802 1959-1997 F-250 with model 44 axle
QT1801 1977½-1997 F-250, F350 with Model 50 and 60 front axles

Front Axle Inner Pinion Bearing Cup Installers
QT1818 1959-1997 All with Dana 44 front axle
QT1805 1977-up ¾ ton, 1 Ton with Dana 60 solid front drive axle.

Front Axle Outer Pinion Bearing Cup Installers
QT1812 1959-1997 all with Dana 30 and 44 front axle
QT1812 1977-2002 ½ ton, ¾ ton with Dana 60

Rear Axle Inner Pinion Bearing Cup Installers
QT1805 1967-up  ¾ ton, 1 ton with Dana 60, 61
QT1806 All with Dana 70HD, 70B
QT18051982-up ¾ ton, 1 ton with Dana 70U

Outer Rear Axle Pinion Bearing Cup Installers
QT1812 1959-up ¾ ton, 1 ton with Dana 60
QT1812 1959-up  ¾ ton, 1 Ton with Dana 70
QT1823 1988-up ¾ ton, 1, 1¼ Ton with Dana 80

NP205 Transfer Case Idler Gear Cup Installer
QT1818 1973-1979 All with 205

Driver Handles:

photo

QT1100 8" Standard Duty Installer Driver Handle With knurled hand grip. 1" diameter x 8" usable length for general purpose use.

Link to QT1100 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1101 14" Standard Duty Installer Driver Handle With knurled hand grip. 1" diameter x 14" usable length for deep seated seals and bearings.

Link to QT1101 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1116 8" Pro Duty Installer Driver Handle With knurled hand grip. 1.25" diameter x 8" usable length for general purpose use.

Link to QT1116 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1119 14" Pro Duty Installer Driver Handle With knurled hand grip. 1.25" diameter x 14" usable length for deep seated seals and bearings.

Link to QT1119 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT5500 Wheel Bearing Packer Takes the mess out of packing wheel bearings, plus it minimizes the chances of getting contaminants mixed with your wheel bearing grease. The QT5500 Bearing Packer does an absolutely beautiful job of forcing grease between the individual bearing rollers.

Link to QT5500 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Seal Installers

top_page
photo

QT1502 Front and Rear Wheel Seal Installer for Ford Is made to clear the raised outer shell on all poplar wheel seals for these vehicles. A relief groove in the installer allows adequate clearance for the outer seal lip, thereby preventing one of the most common causes of premature seal failure.

Link to QT1502 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1503 Dana 70 and Dana 80 Rear Wheel Seal Installer for Ford Is specifically made to install QU40449 and similar flanged inner wheel seals.

Link to QT1503 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1504 Dana 30, Dana 44 and GM 10 Bolt Front Wheel Seal Installer is specifically made to install QU50091 and QU50654 inner wheel grease seals to the correct depth without damaging the seal. Applications include many 1960 to early 1990s Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s up to 3/4 ton class. A relief groove in the installer allows adequate clearance for the outer seal lip on QU50091, thereby preventing one of the most common causes of premature seal failure. Aluminum Installer is Made in U.S.A. by us here in Roberts, Montana.

Link to QT1504 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1506 Dana 60 Front Wheel Seal Installer Is specifically made to install QU50208 front inner wheel seals. The Installer will stop when the seal is square to the bore and seated to the correct depth. Superseded by QT1504.

photo

QT1529 Rear Wheel Seal Installer for 1999-2012 Ford F-250, F-350 trucks with Sterling Type 10.5" Rear Axles Is specifically made to install QU20022 Ford original equipment, oil-bath inner rear wheel seals in 1999 -up Ford F-250, F-350 single rear wheel (SRW) trucks with Ford corporate 10.5" rear drive axles.

Link to QT1529 Catalog Page

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1534 Rear Wheel Seal Installer Is specifically made to install QU20051 oil-bath inner rear wheel seal.

Link to QT1534 Catalog Page

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Discontinued Tools

top_page
product note

The following tools have been discontinued and are no longer available.

photo

QT1098 Differential Master Bearings For Dana 60 and 70 Axles Also known as Dummy Bearings, these precision machined, solid steel tools are used in place of real bearings to easily determine the shim thickness required for correct backlash and differential bearing preload. Discontinued.

photo

QT1099 Differential Master Bearings For Dana 70HD and 80 Axles Also known as Dummy Bearings, these precision machined, solid steel tools are used in place of real bearings to easily determine the shim thickness required for correct backlash and differential bearing preload. Discontinued.

photo

QT1123 Front Axle Shaft Puller Attaches to any 5/8" fine thread* Slide Hammer. QT1123 is specifically designed to work on all 4x4 Ford Excursion and 1999 to 2004 Super Duty® F-250, F-350, F-450, and F-550 Dana-Spicer front drive front axles. Made in U.S.A. Discontinued.

photo

QT1124 Hub-Lock Puller for all 4x4 Ford Excursion and 1999 to 2004 Super Duty® trucks will make removing those stuck-in-place, tapered body, factory lockout hubs a cinch! The inside is machined at a taper that matches the factory hub taper. Made in U.S.A. Discontinued.

photo

QT1163 Vacuum Hub Release Tool For Ford Ranger 4x4's. Allows damage-free removal of the vacuum actuated plastic hubs found on mid-size Ranger pickups. Includes the Puller and special clips to release the auto hub from the wheel hub. Discontinued.

photo

QT2031 Borg Warner T18, T19, & T98 Transmission Dummy Shaft Is used to hold the counter shaft needle bearings, spacers, sleeve, and thrust washers in place. Discontinued.

QT3013 Ford Diesel or Big Block 1-1/4" 10 Spline Clutch Tool Fits 1987-02 Ford F250 and F350 with 7.3l Diesel, 460 (7.5l) big block V8 or the gas V10 with 5 speed transmission. Discontinued.

photo

QT4008 Medium Size U-Joint Separator Yoke Is used with a QT1065 series C-frame Press and QT4016 Press Anvil to easily remove universal joints. Discontinued.

photo

QT9018 5 Pound Dead-Blow Sledge Hammer Is indispensable for installing differentials and removing rusted or stuck components without damaging critical machined surfaces. A must have tool for any serious 4x4 mechanic. Discontinued.