Parts for GM New Process NP263HD, NP263XHD Transfer Case in Chevy, GMC Trucks

Bearings

top_page

QU10897 Transfer Case Input or Front Output Ball Bearing without Snap Ring Groove is an original equipment Ball Bearing for NP263 series Chain Drive Transfer Cases. Usually USA made but can be imported.
1999-2007 New Process NP263LD Input and Front Output Bearing
2001-2007 New Process NP263HD Input and Front Output Bearing
2001-2007 New Process NP263SHD, NP263XHD Front Output Bearing

Link to our QU10897 quad4x4.com Large Text Product Page

QU30030 Shift Shaft Support Bearing for GM NP263 series electric shift transfer cases in Chevy and GMC 4x4 trucks

Link to our QU30030 quad4x4.com Large Text Product Page

QU50114 1 Piece Transfer Case Mainshaft Front Pilot Bearing and Cup is an original equipment, unitized drawn cup bearing that replaces X10000 Bearing and QU50083 Sealing Plug in many New Process NP263 chain drive transfer cases. The one piece design of this bearing simplifies installation. This Bearing fits in the back of the input shaft to support the front of the mainshaft (rear output shaft) Made in U.S.A

Case Parts and Case Assemblies

top_page

QU10907 Oil Pump Pick up Filter Screen for LEFT drop New Process transfer cases with 3/8" oil pick up tubes

QU30023 Case Access Plug for the rear output bearing snap ring on GM NP263 series transfer cases.

QU30024 Mode Inner Synchro Cone for GM NP263 series transfer cases.

QU30025 Oil Pump Inlet O-Ring seals between the oil suction tube and the oil pump in all New Process NP263 Series Transfer Cases in Chevy and GMC 4x4 trucks.

Link to our QU30025 quad4x4.com Large Text Product Page

QU30026 Pickup Oil Suction Tube for GM New Process NP263 series transfer cases.

QU30151 Brand New NP263HD New Process Transfer Case Assembly for GM 32 spline applications.

QU30153 Brand New NP263HD New Process Electric Shift Transfer Case Assembly with 29 spline input shaft.

QU30152 Brand New NP263XHD New Process Electric Shift Transfer Case Assembly with 29 spline input shaft.

QU30209 Rear Case Half Assembly for GM NP263SHD and NP263XHD New Process transfer case in Chevy and GMC trucks.

Drive Chains

top_page

QU50807 1-1/2" Wide Morse Transfer Case Drive Chain for Chevy and GMC NP263HD New Process Transfer Cases.

QU50811 1-1/2" Wide Transfer Case Drive Chain for GM New Process NP263XHD transfer cases.

Gaskets

top_page

TK30052 6 Bolt Round Transfer Case Adapter Gasket fits between your GM 4x4 transmission and 32 spline input transfer case. TK30052 is the current original equipment service part for GM 32 spline input NP263 series transfer cases mounted behind automatic transmissions and NV4500 5 speed manual transmissions. Made in U.S.A.

Input Shafts

top_page

QU50367 32 Spline Input Gear is a Genuine OE New Process Part for GM New Process NP263 series transfer cases.

QU50617 29 Spline Input Shaft is a Genuine Original Equipment Part for GM NP263SHD and NP263XHD New Process transfer cases.

Seals

top_page

QU30031 Transfer Case Input Seal is a genuine New Venture double lip, double spring Seal for New Process NP263 series Trannsfer Cases in Chevy  and GMC mid and full size 4x4s. Double lip design seals oil from both sides so it can function both as the transmission output Seal and Transfer Case input Seal. 

Link to our QU30031 quad4x4.com Large Text Product Page

QU30032 Unitized Transfer Case Front Output Seal is a genuine original equipment New Venture Seal for Chevy and GMC full size 4x4s New Process NP263 series Transfer Cases. This is an oil-bath type Seal that has a built in wear sleeve that presses over your front output shaft. The Wear Sleeve rotates inside the main seal during operation. Made in U.S.A.

Link to our QU30032 quad4x4.com Large Text Product Page

Slip Yokes

top_page

QU30276 30 Based on 31 Spline Genuine AAM 1415 Series Rear Output Slip Yoke with Plated Finish for 2001-2007 Chevy and GMC K2500, K3500 series 4x4's with NP263HD and NP263XHD transfer cases with 2.2"ID rear output seals.

Snap Rings

top_page

QU10898 Transfer Case Snap Ring for Input or Front Output Ball Bearing is an original equipment Ball Bearing for New Process NP263 series Transfer Cases. QU10898 is used to retain QU10897 Ball Bearing, it fits in a groove machined in the front transfer case half. Made in U.S.A.
1999-2007 New Process NP263LD Input and Front Output Bearing
2001-2007 New Process NP263HD Input and Front Output Bearing
2001-2007 New Process NP263SHD, NP263XHD Front Output Bearing

Link to our QU10898 quad4x4.com Large Text Product Page

 

 

QU30014 Input Bearing Snap Ring for GM NP263SHD and NP23XHD transfer cases.

QU30015 Rear Output Shaft Snap Ring for GM NP263LD and NP263HD transfer cases.

QU30021 Output Bearing Lock Ring for all New Process NP263 series transfer cases.

Small Parts and Small Parts Kits

top_page

QU50920 Basic Small Parts Kit for GM New Process NP263 series transfer cases.