New Venture NV273 Electric Shift Transfer Cases for Chevy and GMC C4500, C5500 4x4 Trucks

The factory 4x4 versions of the Chevy Kodiak and GMC Topkick C4500 and C5500 medium duty trucks use a remote mount, right drop New Process NV273 electric shift transfer case. While some parts used in these transfer cases is the same as those used in Dodge and Ford versions of the NV273, many are unique to the GM model. Factory C4500/C5500 4x4s were only built for the 2005 to 2009 model years although some final production trucks are titled as 2010 vehicles. These 1-1/4 ton and 1-1/2 ton rated models featured an 8, 000 pound Dana 70 front axle, extra heavy frame rails, big cabs, and an extensive list of functional options that gave these trucks capabilities unequaled by contemporary offerings from Dodge and Ford. Despite their popularity and profitability, GM was actively trying to get out of the medium and heavy-duty markets even before General Motors declared bankruptcy in 2009. Production of the C4500 and C5500 trucks ended on July 31, 2009.

Case Identification

top_page
product note
GM C4500/C5500 factory 4x4 trucks all use a remote mount, right drop, electric shift New Venture NV273 chain drive transfer case. When GM first started using the NV273, it was built at the Chyrsler owned New Process Gear Plant (NPG) in East Syracuse, New York which was then operated by New Venture Gear (NVG) a joint venture controlled by Chyrsler and General Motors. The case castings usually had the New Venture Logo, but the assembly tag had the New Process Name. When NVG dissolved a short time later, Chyrsler continued building the GM NV273 at the New Process factory. After a couple of years, Chyrsler sold the New Process production rights to Canada's Magna Corporation. Under Magna, NV273 transfer cases were still built at the NPG plant until GM killed off their medium duty truck lines. From 2010 to 2011 Magna phased out the NPG factory and moved legacy transfer case assembly to Indiana. The important thing to know is despite all these name changes and plant relocations, most of the parts in a 2005 GM NV273 built in Syracuse are pretty much the same as a 2014 NV273 replacement assembly from Indiana
For parts identification purposes, a Round Tag is affixed to the back of the rear case. Stamped on the tag are the Model Number, Assembly Number (8 digit number), Transfer Case Build Date, and Low Range Ratio. In most cases, parts identification is pretty straight forward with the year and assembly number, but there are times we may need additional information such as the Vehicle Identification Number (VIN) or transfer case build date. Transfer Cases built in Syracuse have the NPG Logo and the legend New Process Gear Syracuse, New York in red plus wording to identify what each number signifies. Indiana built cases have the legend Magna Powertrain Muncie Indiana
There is also a factory applied Decal usually located on top of the front case. The Decal has a Bar Code, serial number, GM assembly part number, and New Process assembly part number. As often as not, the Decal is long gone or illegible by the time the transfer case needs service, but if the Round Tag is missing, look for this decal
GM NV273 Transfer Case Production Assembly Numbers:
12573073 Early Production Vehicles
24235129 Mid Production Vehicles
24252845 Late Production Vehicles and last assembly in production for replacement units

Bearing and Master Overhaul Kits

top_page
product note
We offer a range of premium, original equipment quality Torque King® Bearing and Master Overhaul Kits for your General Motors New Venture NV273GM Electric Shift Transfer Case. Torque King® Kits are assembled with 1st class quality parts here in Montana specifically for the GM versions of NV273 Electric Shift Transfer Cases. (There are no Chinese Knockoff parts in Torque King® Kits!)
Basic Kits include all the Bearings and and Shaft Seals but no O-Rings or small parts.
Complete Kits include all the Bearings, Shaft Seals, O-Rings, Planetary Thrust Washers, and Shift Fork Pads.
Master Overhaul Kits include everything in a Complete Kit PLUS Snap Rings, Oil Pump Pickup, Drive Chain, and Output Nuts
TK2176 Torque King® Premium Quality Basic Bearing and Seal Kit Is for GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks. TK2176 includes all the Input/Output Bearings and Seals.

Link to our TK2176 Large Text Product Page
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
TK2177 Torque King® Premium Quality Complete Bearing and Seal Kit For GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks. Kit includes all the Bearings, Shaft Seals, O-rings, Planetary Thrust Washers, and Shift Fork Pads.

Link to our TK2177 Large Text Product Page
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
TK2178 Torque King® Premium Quality Master Overhaul Kit for 2005-2009 General Motors NV273 Electric Shift Transfer Cases includes all the Bearings, Shaft Seals, O-rings, Planetary Thrust Washers, Shift Fork Pads, Snap Rings, Oil Pump Pickup, Drive Chain, and Front Output Shaft Locknut.

Link to our TK2178 Large Text Product Page
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Bearings

top_page
product note

All General Motors New Process/New Venture NV273GM electric shift transfer cases use the same bearings. Wear and failure issues with the Ball Bearings are usually related to hard use or more likely from lubrication problems (old, dirty, low, or wrong oil)

photo
QU50250 NV273GM Input Shaft Ball Bearing Is the current original equipment replacement Input Bearing for all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU50250 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU30176 NV273GM Double Row Input Gear Needle Roller Pilot Bearing Is a drawn cup type (enclosed on one end) needle bearing with two rows of needle bearings that gets pressed into the back of your Input Shaft to support the front of the Rear Output (Main) Shaft. This original equipment needle bearing fits NV273GM Transfer Cases in Chevy and GMC Chassis Cab 4x4 trucks.

Link to QU30176 Large Text Catalog page for more details

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50249 NV273GM Rear Output Shaft Ball Bearing Is the current original equipment replacement Rear Output Ball Bearing for all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU50249 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU20215 Rear Output Shaft Needle Roller Bearing Fits in the Fixed Yoke Type Rear Extension Housing on 2005-2009 New Venture NV273GM Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU20215 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10906 NV273GM Front Output Shaft Front Ball Bearing Is the current original equipment replacement Front Output Front Bearing for all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10906 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50502 NV273GM Front Output, Rear Needle Roller Bearing For all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks. QU50502 is an original equipment caged needle roller bearing that gets pressed in the bearing pocket machined in the rear transfer case half.

Link to QU50502 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU30030 NV273GM Shift Shaft Support Bearing Is the current original equipment replacement Bearing for all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU30030 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Case Parts and Complete Assemblies

top_page
product note

The major cause of broken Transfer Case castings is accidents. A severe front end hit can push the driveshaft backwards breaking one or both case halves. Other common causes are running the transfer case out of oil, rock hits/high centering, excessive driveshaft angles, and operating a case with a badly worn chain

photo
QU11092 Front Case Vent Breather Fitting For New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU11092 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU30185 Brand New NV273 Transfer Case Assembly Is a current production, brand new New Venture NV273GM remote mount, electric shift transfer case assembly for 2005-2010 Chevy and GMC C4500/C5500 4x4 trucks. These ready to install complete assemblies are manufactured in limited numbers in Muncie Indiana by the company that bought New Process/New Venture from Chyrsler

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Drive Chain and Sprockets

top_page
product note
You should replace the chain when doing major transfer case service, plus you should inspect the sprockets for wear on the teeth. If you can feel teeth wear with your fingernail REPLACE BOTH the SPROCKETS and CHAIN!
photo
QU50255 NV273GM Transfer Case Drive Chain Is a genuine original equipment Morse® Transfer Case Drive Chain for New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU50255 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU30178 NV273D Chain Sprocket Is a genuine original equipment Sprocket that will fit either the Mainshaft or Front Output Shaft in all NV273GM Manual Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU30178 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10994 One Piece Combination Sprocket Carrier and Mode Clutch Is a genuine original equipment part that Slides over the Rear Output (Main Shaft) and supports your Drive Sprocket. QU10994 is an exact replacement part for NV273GM transfer case assembly numbers 24235129 and 24252845 AND is the updated replacement part for early production NV273 Transfer Cases that originally used QU11084 Sprocket Carrier and QU11085 Mode Clutch.

Link to QU10994 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11084 Early NV273GM Sprocket Carrier Is a genuine New Process part for early production NV273GM Transfer Cases with assembly number 12573073. If you need both the Sprocket Carrier and Mode Clutch, order QU10994 and one QU10902 Snap Ring.

Link to QU11084 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
product note

Replacing damaged or worn small parts is often the difference between a first class, long-term repair and a short lived nightmare. In this section are the small parts and accessory items that do not neatly fit under our other parts headings

photo
QU90005 RTV Sealant For sealing between the mating flanges of all the case castings. Except for the QU10950 Shift Support Shim Gasket, there are no conventional gaskets used on the NV273D, all case sealing is done with RTV sealant.

Link to QU90005 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU90006 RTV Sealant For sealing between the mating flanges of all the case castings. Except for the QU10950 Shift Support Shim Gasket, there are no conventional gaskets used on the NV273D, all case sealing is done with RTV sealant.

Link to QU90006 Large Text Catalog page for more details

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Oil Pumps and Oil Pump Pickup Parts

top_page
product note

General Motors New Process and New Venture NV273GM Transfer Cases have a unique, rebuildable Oil Pump

photo
QU30179 Oil Pump Pick Up Screen For NV273GM Electric Shift Transfer Cases with Transfer Case Assembly numbers 12573073, 24235129, or 24252845 in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU30179 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU30183 Oil Pump Assembly For remote mount NV273GM Electric Shift Transfer Cases is a genuine New Venture original equipment service replacement Oil Pump for NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU30025 Oil Pump Inlet O-Ring All GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU30025 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU30181 Upper Oil Feed Tube Connector Hose For NV273GM Electric Shift Transfer Cases with Transfer Case Assembly numbers 12573073, 24235129, or 24252845 in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU30181 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU30199 Oil Pickup Screen to Oil Feed Tube Connector Hose For NV273GM Electric Shift Transfer Cases with Transfer Case Assembly numbers 12573073, 24235129, or 24252845 in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU30199 Large Text Catalog page for more details

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Output Shafts

top_page
product note
All GM NV273 Transfer Cases have fixed yoke type input and front/rear output shafts. Front output shafts were built in an early and late version. While they are interchangeable if you also replace the sprocket snap ring, I feel the early Front Output Shaft is preferred for competition or really heavy-duty use, due to the full length spline and the early Sprocket Snap Ring is significantly thicker than the one used with the later shaft
photo
QU50672U Used Early Production NP273GM Front Output Shaft for NV273GM Electric Shift Transfer Cases In C4500 and C5500 4x4 trucks with Transfer Case Assembly number 12573073.

Please refer to QU50672U page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10998 NP273GM Front Output Shaft for General Motors NV273GM Electric Shift Transfer Cases In 2007-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks with Transfer Case Assembly numbers 24235129 and 24252845.

Please refer to QU10998 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10512 New Process NV273GM Front Output Shaft Flange Nut For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Please refer to QU10512 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50681 New Process NV273GM Input or Rear Output Shaft Flange Nut For all Input and Rear Output flange yokes on GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Please refer to QU50681 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Planetary Parts

top_page
product note
Front output shafts were built in an early and late version. While they are interchangeable if you also replace the sprocket snap ring, I feel the early Front Output Shaft is preferred for competition or really heavy-duty use, due to the full length spline and the early Sprocket Snap Ring is significantly thicker than the one used with the later shaft. Replacement planetary assemblys built after 2012 use 2 QU10572 thrust washers instead of one each QU10900 and QU10572
photo
QU11001 NV273GM Planetary Assembly Kit For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks. QU11001 includes the Planetary, 2 QU10572 Thrust Washers, QU11039 Lock Plate, and QU10814 Snap Ring.

Link to QU11001 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10900 Planet Thrust Washer, Outer Is a round plastic Thrust Washer that is located between the front of the Input Gear teeth and QU11039 Planetary Lock Plate. QU10900 fits all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10900 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10572 NV273 Planetary Thrust Washer, Rear Which is located between the back of the input shaft and the rear planetary plate for NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10572 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11039 Planetary Lock Plate or Thrust Plate for NV273GM Transfer Cases Is a 1/8" thick iron washer for NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU11039 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Poppet Parts

top_page
product note
The Poppet parts put tension on the Sector Shaft Cam to keep the Transfer Case from "jumping" out of gear
photo
QU11016 Poppet Plug for NV273GM Transfer Cases For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU11016 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50682 Poppet Detent Spring for NV273GM Transfer Cases For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU50682 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11018 Poppet Detent Plunger for NV273GM Transfer Cases For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU11018 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10800 Poppet Plug O-Ring For all 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10800 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Seals

top_page
product note
The Input Seal and Both Output Seals are the same on all General Motors C4500, C5500 New Venture NV273GM Transfer Cases
photo
QU30174 NV273GM Input or Output Seal Is the current production, genuine New Venture original equipment Triple Lip Seal with Spring-Loaded Inner Lip, Center Wiper Lip and Outer Deflector Lip that is used on the input shaft and both output shafts on all General Motors New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks. Order 3 Seals per transfer case.

Link to QU30174 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10800 Poppet Plug O-Ring For all 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10800 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU30025 Oil Pump Inlet O-Ring All GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU30025 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Shifting: Major Parts

top_page
product note
Your New Venture NV273GM can be electrically shifted for Mode (4x2, Neutral, 4x4) and Range (1:1 Direct Drive High Range and 2.72:1 Low Range). Overall, the NV273GM electric shift system is far more reliable than 1980s and 1990s era electric shift transfer cases, but shift malfunctions are not uncommon and the labor time it takes to troubleshoot the problem often exceeds the cost of the defective part itself which can be with any of the shift control parts from the dash switch to the motor
photo
QU10991 Synchronizer Mode Hub for All GM New Venture NV273 Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10991 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10992 Synchronizer Mode Clutch Sleeve For all GM New Venture NV273 Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10992 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11002 Mode Fork For all Chevy and GMC NV273 Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU11002 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11089 Range Fork Assembly For all GM New Venture NV273 Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU11089 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Shifting: Small Parts

top_page
product note
Of all the parts on NV273GM electric shift Transfer Cases, the Shift Fork Pads are the most common components to require replacement. Worn out Pads will allow damaging metal to metal contact between the shift forks and sliding clutches so your Shift Fork Pads should be replaced any time you are performing internal transfer case service
photo
QU10951 Range Fork Shift Pad For all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks. Order two QU10951 Shift Fork Pads per transfer case.

Link to QU10951 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10164 Mode Fork Tip Pads For all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to our QU10164 Large Text Product Page
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10670 Mode Fork Center Pad For all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10670 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11004 Mode Fork Spring For all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU11004 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
product note

The small hardware items you may need to finish a big job are usually the hardest parts to find. Anyone who has done much mechanical work has either misplaced a small part and/or encountered hardware that is worn, corroded, or broken. Our NV273GM Small Parts inventory includes those odds and ends that do not fit any of our other product categories

photo
QU10512 New Process NV273GM Front Output Shaft Flange Nut For all GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to our QU10512 catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50681 New Process NV273GM Input or Rear Output Shaft Flange Nut For all Input and Rear Output flange yokes on GM New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU50681 page for more details and ordering information
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU50191 Chip Magnet For all General Motors New Venture NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU50191 page for more details and ordering information

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11020 Flange Head Bolt, NV273GM Rear Case to Front Case 21 of these Bolts plus some special length fasteners are used to secure the Rear Case Half to the Front Case Half.

Link to QU11020 page for more details and ordering information
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU11022 Bolt, NV273GM Rear Retainer to Rear Case 8 of these Bolts are used to Attach The Rear Output Extension Housing to The Rear Case Half.

Link to QU11022 page for more details and ordering information
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10939 GM NV273 Transfer Case Drain or Fill Plug Is a genuine, original equipment New Process redesigned plug to replace either (or both) the drain and fill plugs on your New Venture NV273GM Transfer Case. Cadmium plated Plug has pre-applied sealant on threads and hex drive hole.

Link to QU10939 page for more details and ordering information
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Snap Rings

top_page
product note

Snap Rings are one of the most overlooked replacement items during a rebuild, but if a weakened or misshaped Snap Ring fails, chances are the resulting damage will pretty much destroy your Transfer Case. We stock all the genuine original equipment Snap Rings for your Chevy or GMC C4500/C5500 4x4 with a New Process/New Venture NV273 Electric Shift Transfer Case

photo
QU10952 Input Bearing to Input Shaft Snap Ring For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10952 page for more details and ordering information
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU10899 Annulus Gear Snap Ring is the large Snap Ring that retains the big planetary annulus gear in your front case half. This genuine New Venture part fits all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10899 page for more details and ordering information

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10907 Input Bearing to Front Case Snap Ring For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10907 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10814 Planetary Snap Ring GM NV273 Secures your Input Shaft and Thrust Washers inside the Planetary Set for all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10814 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10975 Mode Shift Hub to Output Shaft Snap Ring For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10975 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10909 Rear Output Bearing to Rear Case Snap Ring For all 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10909 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10908 Rear Output Shaft to Rear Output Bearing Snap Ring For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10908 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10902 Thin Sprocket Snap Ring For GM C4500, C5500 4x4 NV273GM Electric Shift Transfer Case assembly numbers 24235129 and 24252845. Two used per transfer case.

Link to QU10902 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10905 Thick Sprocket Snap Ring For GM C4500, C5500 4x4 NV273GM Electric Shift Transfer Case assembly number 12573073. Three used per transfer case.

Link to QU10905 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10910 Front Output Bearing to front Case Snap Ring For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10910 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU10600 Front Output Shaft to Front Output Bearing Snap Ring For all GM NV273GM Electric Shift Transfer Cases in 2005-2009 C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks.

Link to QU10600 Large Text Catalog page for more details
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!