We stock a good selection of hard to find hardware items including U.S.A. made, lot certified, high strength bolts, nuts, and washers. Often the difference between a fair job and a great job is in the small details, things like using fasteners that meet or exceed orginal equipment specs instead of the unsafe counterfeit hardware so often sold by hardware stores
QU95017 5/8" Grade 8 SAE Fine Thread Hex Nut Link to our QU95017 Large Text Product Page
Hex Nuts, SAE All Metal Locking
Our heat treated, lot certified, USA made, Class C Locknuts have 150, 000 psi minimum proof strength and are designed to be used with matching Grade 8 fasteners. This type of nut resists loosening even when subjected to severe vibration. Plated for corrosion resistance. Meets IFI and ANSI specifications.
Dan the Gear Man Safety Note: Class C Locknuts are NOT recommended for use where the temperature will exceed 450° F (232°C)!
QU95033 1/4" SAE Class C Lock Nut For Grade 8 applications. Fine thread Locknut has 1/4"-28 threads
QU95035 3/8" SAE Class C Lock Nut for Grade 8 applications. Fine thread Locknut has 3/8"-24 threads Link to our QU95035 Large Text Product Page
QU95036 7/16" SAE Class C Lock Nut for Grade 8 applications such as spindles and rear axle shaft studs. Fine thread Locknut has 7/16"-20 threads Link to our QU95036 Large Text Product Page
QU95037 1/2" SAE Class C Lock Nut for Grade 8 applications. Fine thread Locknut has 1/2"-20 threads Link to our QU95037 Large Text Product Page
QU95006 5/8" Coarse Thread Grade 8 Hex Nut Sold individually.
QU95007 3/4" UNC Coarse Thread Grade 8 Hex Nut Sold individually.
QU95008 7/8" Coarse Thread Grade 8 Hex Nut Sold individually.
QU95079 5/32x1.5 Cotter Key
QU10924 5/16" ID Fuel or Breather Hose, Sold by the Inch. Temperature Rating -40 DEG to 257 DEG Fahrenheit. Compatible with Gasohol, Diesel, Ethanol, Methanol, Sour Gas and Bio-Diesel.
180,000 PSI Rated Hardened and Tempered, Lot Certified, SAE Flat Washer with smooth bearing surfaces. Thickness runs a little heavier than standard SAE Flat Washers Sold individually
QU95047 180, 000 PST SAE Flat Washer Inside Diameter: 25/64" Outside Diameter: 13/16", Thickness: 0.086" +/- 0.007"
QU95049 1/2" Grade 8 SAE Flat Washer
QU95050 9/16" Grade 8 SAE Flat Washer Inside Diameter: 41/64" Outside Diameter: 1-5/16", Thickness: 0.148" +/- 0.012"
QU95051 5/8" Grade 8 SAE Flat Washer Inside Diameter:
QU95052 3/4" Grade 8 SAE Hardened Flat Washer Made in U.S.A
QU95058 3/8" Extra Thick, High Strength Flat Washer Inside Diameter: 13/32" Outside Diameter: 13/16", Thickness: 0.125" +/- 0.008"
QU80041 Copper Washer to replace copper gaskets for leak-free brake hose connections. Inside diameter: 0.39", Outside diameter: 0.625", Thickness: 0.062".