Parts for 1967-1971 IHC Scout Dana 30 Closed Knuckle Front Axles

Axle Universal Joints

top_page
product note
The Scout Closed Knuckle Dana 30 axle uses solid cross, inside lock-up universal joints without seals that are designed to be bathed in a semi-liquid lubricant from inside the closed knuckle balls. By today's standards, these u-joints are way undersized, but given the lighter vehicle weights and modestly powered engines of the mid 1960's and early 1970's, the joint size was probably adequate
photo

QU40507M Axle Universal Joint for Scout Dana 30 Closed Knuckle Front Axles Is a genuine original equipment axle manufacturer, solid-cross, non-greaseable, front axle u-joint without seals for 1967-1971 IHC Scout Dana 30 closed knuckle front axles. Link to our QU40507M Large Text Product Page.

Please refer to QU40507M page for more details and ordering information.

Closed Knuckle Parts

top_page
product note
We stock the regular service closed knuckle parts for your 1967-1971 International Scout 4x4 with a closed knuckle Dana 30 front axle which will have 8 bolt Knuckle Ball Hemisphere Seals. With a Closed Knuckle axle, the axle universal joints and king pin bearings are lubricated by very heavy oil or a viscous grease that will flow when the axle shafts rotate. A large, multi-piece seal is bolted to the backside of the steering knuckle to keep lubricant in and water out. On poorly maintained closed knuckle axles or axles equipped with lockout hubs that are rarely used in 4x4, the upper king pin bearing and axle universal joint can suffer from lack of lubrication. The Ball Seals will usually weep some lubricant especially when standard gear oils are used as a lubricant. Submersion of the axle under water or condensation from temperature changes can cause moisture to build up inside the enclosed ball and lead to corrosion damage and part failures
photo

QK4617 1967-1971 IHC Scout Dana 30 Closed Knuckle Front Axle Knuckle Bearing Kit Includes 4 Timken® Knuckle Bearings, 4 Timken® Knuckle Bearing Cups, and Rectangular Knuckle Shim Set to service both sides of your vintage Scout 4x4.

Please refer to QK4617 page for more details and ordering information.

photo

QU40773 Knuckle Shim Kit for 1967-1971 IHC Scout Dana 30 Closed Knuckle Front Axles with 8 Bolt Ball Seals Includes a selection of rectangular shims to adjust the Knuckle Bearing preload. Services one side of your vintage Scout 4x4.

Please refer to QU40773 page for more details and ordering information.

photo

QU40188 1967-1971 IHC Scout Dana 30 8 Bolt Knuckle Ball Seal Kit Is a genuine original equipment Kit for Dana 30 closed knuckle front axles in 1967-1971 Scout 4x4s.

Please refer to QU40188 page for more details and ordering information.

photo

QU50627 1967-1971 IHC Scout and Dana 30 Closed Knuckle Timken® Knuckle Bearing Cup For Dana 30 closed knuckle front axles in 1967-1971 Scout 4x4s.


Please refer to QU50627 page for more details and ordering information.

photo

QU50628 1967-1971 IHC Scout and Dana 30 Closed Knuckle Timken® Knuckle Bearing For Dana 30 closed knuckle front axles in 1967-1971 Scout 4x4s.


Please refer to QU50628 page for more details and ordering information.

Gaskets

top_page
product note
In the mid 1970's Dana made a differential cover design change to heavy gauge covers with flat mating flanges. Unlike the previous, thin gauge covers with embossed flanges which were made for use with a cut gasket, the new design, thick gauge covers are designed for sealing with RTV. If you desire, you can still use a gasket with the new type cover by combining the gasket with thin films of RTV. We stock both Ultra Gray RTV Sealant and genuine Dana Gaskets
photo

QU15005 Front Hub Gasket For 1967-1971 IHC Scout and 1971-1973 Jeep Wagoneer Dana 30 closed knuckle front axles. QU15005 fits between your wheel hub and drive hub flange.
Please refer to QU15005 page for more details and ordering information.

photo

QU40236 Dana 30 Front Differential Cover Gasket Is a genuine Dana Spicer replacement Diff Cover Gasket for all Dana 30 closed knuckle front axles in 1967-1971 Scout 4x4s.
Please refer to QU40236 page for more details and ordering information.

QU42027 Hipro Dana 30 Differential Cover Gasket For Model 30 axles. Reusable Dana 30 High Performance Differential Gasket is a genuine Dana part

photo

S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes. Please refer to S82149 page for more details and ordering information.

Hubs

top_page

QU15027 Warn Premium Lock Out Hub Set Fits 1967-1971 International Scout with Dana 30 closed knuckle front axles and 10 spline outer axle shafts. These hubs are the best quality, sharpest looking, and longest lasting hubs for your Scout bar none. A quick turn of the dial lets you engage and disengage your front axle shafts from the wheels. Disengage for better mileage, towing, and to reduce wear on your front diff and driveshaft. Engage for solid and reliable 4x4 traction. Kit includes 2 brass dial manual hubs

Miscellaneous Parts

top_page
photo

QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.

Please refer to QU90009 page for more details and ordering information.

Spindles and Spindle Nuts

top_page
product note
Scouts with manual lock-out hubs or solid drive flanges use the same four piece spindle nut parts as the World War II military MA and MB Jeeps. A thrust washer is used between the outer wheel bearing and inner spindle nut. The inner nut adjusts the wheel bearing end-play. The outer nut functions as a lock nut, it is held in place by a bend-over lock washer located between the two nuts. Vehicles with Warn Lock-O-Matic Hubs require special lockwashers and round outer nuts
photo

QK4669 Hex Spindle Nut Kit Includes inner thrust washer, spindle lock washer, and two 2-1/16" OD hex spindle nuts with 1.5" threads. Fits all 1961-1971 IHC Scout Dana 30 closed knuckle front axles with manual hubs or splined drive flanges.

Please refer to QK4669 page for more details and ordering information.

photo

QU15000 Front Spindle Inner Thrust Washer for Scout Fits between your outer wheel bearing and inner spindle nut on 1961-1971 IHC Scout Dana 30 closed knuckle front axles with manual hubs or splined drive flanges.

Please refer to QU15000 page for more details and ordering information.

photo

QU15001 Front Spindle Nut for Scout 1-1/2" Thread X 2-1/16 Hex Front Spindle Nut for 1961-1971 IHC Scout Dana 30 closed knuckle front axles with manual hubs or splined drive flanges. Use two per side.

Please refer to QU15001 page for more details and ordering information.

photo

QU15002 Front Spindle Lock Washer for Scout Fits between your inner and outer spindle nuts on 1961-1971 IHC Scout Dana 30 closed knuckle front axles with manual hubs or splined drive flanges. Bend washer over flat on outer nut to lock spindle nuts in place.

Please refer to QU15002 page for more details and ordering information.

Spindle Bushings

top_page
product note
One of these Bushings are pressed into the inboard side of each spindle to support your outer axle shaft. These are one of the most common 1967-1971 IHC Scout or 1971-1973 Jeep Wagoneer Dana 30 closed knuckle front end parts requiring replacement as both the thrust face and inside diameter of the Bushing are subject to wear
photo

QU40321 Spindle and Axle Shaft Bushing for Scout Dana 30 Closed Knuckle Axles Is a genuine original equipment flanged Bronze Bushing that gets pressed into the back of the spindle to support the axle shafts in your IHC Scout.

Please refer to QU40321 page for more details and ordering information.

Tools

top_page
photo

QT1011 2-1/16" Hex Front Spindle Nut Socket For 1967-1971 Scouts with Dana 30 closed knuckle front axles. Also fits 1972-1986 Jeep CJ-5, CJ-6, CJ-7, and CJ-8 (Scrambler) and most other Jeep vehicles from 1942-1971 except M715 series. This Special Thin-Wall 1/2" drive socket is an absolute necessity to properly service the front wheel bearings on your vintage Scout.

Please refer to QT1011 page for more details and ordering information.