Parts for 1971-1973 Jeep Wagoneers with Dana 30 Closed Knuckle Front Axles

Axle Universal Joints

top_page
product note
The Jeep Wagoneer Closed Knuckle Dana 30 axle uses solid cross, inside lock-up universal joints without seals that are designed to be bathed in a semi-liquid lubricant from inside the closed knuckle balls. By today's standards, these u-joints are way undersized, but given the lighter vehicle weights and modestly powered engines of the early 1970's, the joint size was probably adequate
photo
QU40507M Axle Universal Joint for Jeep Dana 30 Closed Knuckle Front Axles Is a genuine original equipment axle manufacturer, solid-cross, non-greaseable, front axle u-joint without seals for 1971-1973 Jeep Wagoneer Dana 30 closed knuckle front axles. Link to our QU40507M Large Text Product Page.

Please refer to QU40507M page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Closed Knuckle Parts

top_page
product note
We stock the regular service closed knuckle parts for your 1971-1973 Jeep Wagoneer with a closed knuckle Dana 30 front axle which will have 8 bolt Knuckle Ball Hemisphere Seals. With a Closed Knuckle axle, the axle universal joints and king pin bearings are lubricated by very heavy oil or a viscous grease that will flow when the axle shafts rotate. A large, multi-piece seal is bolted to the backside of the steering knuckle to keep lubricant in and water out. On poorly maintained closed knuckle axles or axles equipped with lockout hubs that are rarely used in 4x4, the upper king pin bearing and axle universal joint can suffer from lack of lubrication. The Ball Seals will usually weep some lubricant especially when standard gear oils are used as a lubricant. Submersion of the axle under water or condensation from temperature changes can cause moisture to build up inside the enclosed ball and lead to corrosion damage and part failures
photo
QK4617 Jeep Dana 30 Closed Knuckle Front Axle Knuckle Bearing Kit Includes 4 Timken® Knuckle Bearings, 4 Timken® Knuckle Bearing Cups, and Rectangular Knuckle Shim Set to service both sides of your vintage 1971-1973 Jeep Wagoneer with the Dana 30 closed knuckle front axle.

Please refer to QK4617 page for more details and ordering information.
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40773 Knuckle Shim Kit for Jeep Dana 30 Closed Knuckle Front Axles with 8 Bolt Ball Seals Includes a selection of rectangular shims to adjust the Knuckle Bearing preload. Services one side of your vintage 1971-1973 Jeep Wagoneer with the Dana 30 closed knuckle front axle.

Please refer to QU40773 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40188 Jeep Dana 30 8 Bolt Knuckle Ball Seal Kit for Dana 44 Standard Front Axles Is a genuine original equipment Kit for Dana 44 standard duty closed knuckle front axles in 1971-1973 Jeep Wagoneers with the Dana 30 closed knuckle front axle.

Please refer to QU40188 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50627 Jeep Dana 30 Closed Knuckle Timken® Knuckle Bearing Cup For Dana 44 Standard Duty closed knuckle front axles in 1971-1973 Jeep Wagoneers with the Dana 30 closed knuckle front axle.


Please refer to QU50627 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50628 Jeep Dana 30 Closed Knuckle Timken® Knuckle Bearing For Dana 44 Standard Duty closed knuckle front axles in 1971-1973 Jeep Wagoneers with the Dana 30 closed knuckle front axle.


Please refer to QU50628 page for more details and ordering information.
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK50784 Torque King Timken Small Closed Knuckle King Pin Bearing Kit For Jeep Dana 30.


Please refer to TK50784 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets

top_page
product note
In the mid 1970's Dana made a differential cover design change to heavy gauge covers with flat mating flanges. Unlike the previous, thin gauge covers with embossed flanges which were made for use with a cut gasket, the new design, thick gauge covers are designed for sealing with RTV. If you desire, you can still use a gasket with the new type cover by combining the gasket with thin films of RTV. We stock both Ultra Gray RTV Sealant and genuine Dana Gaskets.
photo
QU40236 Dana 30 Front Differential Cover Gasket Is a genuine Dana Spicer replacement Diff Cover Gasket for all 1972-1983 Jeep CJ-5, 1972-1981 Jeep CJ-6, 1976-1986 Jeep CJ-7, and 1981-1986 Jeep CJ-8 Scrambler 4x4s.

Please refer to QU40236 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU42027 Hipro Dana 30 Differential Cover Gasket For Model 30 axles. Reusable Dana 30 High Performance Differential Gasket is a genuine Dana part
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes. The perfect choice to seal the differential cover on your Dodge Ram.


Please refer to S82194 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hubs

top_page
QU15027 Warn Premium Lock Out Hub Set Fits 1971-1973 Jeep Wagoneers with Dana 30 closed knuckle front axles. These hubs are the best quality, sharpest looking, and longest lasting hubs for your Jeep bar none. A quick turn of the dial lets you engage and disengage your front axle shafts from the wheels. Disengage for better mileage, towing, and to reduce wear on your front diff and driveshaft. Engage for solid and reliable 4x4 traction. Kit includes 2 brass dial manual hubs
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindles and Spindle Nuts

top_page
product note
J-Series Jeeps with manual lock-out hubs or solid drive flanges use the same four piece spindle nut parts as the World War II military MA and MB Jeeps. A thrust washer is used between the outer wheel bearing and inner spindle nut. The inner nut adjusts the wheel bearing end-play. The outer nut functions as a lock nut, it is held in place by a bend-over lock washer located between the two nuts. Vehicles with Warn Lock-O-Matic Hubs require special lockwashers and round outer nuts
photo
QK4669 Hex Spindle Nut Kit Includes inner thrust washer, spindle lock washer, and two 2-1/16" OD hex spindle nuts with 1.5" threads. Fits all 1971-1973 Jeep Wagoneer Dana 30 closed knuckle front axles with manual hubs or splined drive flanges.

Please refer to QK4669 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU15000 Front Spindle Inner Thrust Washer for Jeep Fits between your outer wheel bearing and inner spindle nut on 1971-1973 Jeep Wagoneer Dana 30 closed knuckle front axles with manual hubs or splined drive flanges.


Please refer to QU15000 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU15001 Front Spindle Nut for Jeep 1-1/2" Thread X 2-1/16 Hex Front Spindle Nut for 1971-1973 Jeep Wagoneer Dana 30 closed knuckle front axles with manual hubs or splined drive flanges. Use two per side.


Please refer to QU15001 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU15002 Front Spindle Lock Washer for Jeep Fits between your inner and outer spindle nuts on 1971-1973 Jeep Wagoneer Dana 30 closed knuckle front axles with manual hubs or splined drive flanges. Bend washer over flat on outer nut to lock spindle nuts in place.

Please refer to QU15002 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
photo
QT1011 2-1/16" Hex Front Spindle Nut Socket For Jeep Wagoneer Dana 30 front axles. Also fits Jeep CJ-5, CJ-6, CJ-7, and CJ-8 (Scrambler) and most other Jeep vehicles from 1942-1971 except M715 series. This Special Thin-Wall 1/2" drive socket is an absolute necessity to properly service the front wheel bearings on your vintage Jeep. Also fits IHC Scout.
Please refer to QT1011 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!