Parts for Dana-Spicer Open Knuckle Model 44 Front Axles in 1974-1991 Jeep® J-Series 4x4 Vehicles

Jeep designated the full-size Wagoneer, Cherokee, Cherokee Chief, Grand Wagoneer and pickups as J-Series vehicles. All 1974-1991 Jeep J-Series models have Dana 44 open knuckle front axles. The Wagoneer/Cherokee and 1/2 ton J-10 models have 6 bolt front wheel hubs. The 3/4 ton J-20 truck has 8 bolt front hubs. Drum brakes were standard and disc brakes optional for 1974-1976, but all 1977 to 1991 Jeeps will have front disc brakes. Except for a vacuum disconnect axle offered for the 1982-1984 model years, the front axle design was largely unchanged through the entire production period although spindles, axle shafts, inner axle seals, pinion yokes and hub parts will vary by year and model.

Axle Identification

top_page
photo
Cover: 10 Bolt, 10-3/8" high

Suspension: Leaf spring

Ball Joints: Pressed in Steering Knuckle, nuts at top
Cherokee (standard track) & Wagoneer Bill of Material Numbers 1974-1976: 603462
1977 Early: 603462 (These have wheel hubs with 3-1/8" diameter inner races. Axle Tube Diameter is 2-3/4".)
1977 Late: 610014 (Wheel hubs have inner races that are just under 3-1/4" diameter. 3" Axle tubes.)
1978-1979: 603683
1980: 610090
1981-1985: 610140, 610227
1982-1984: 610157 (with vacuum controlled Central Axle Disconnect)
1986: 610247
1987-1988.5: 610283
1988.5-1991: 610325
J-10 1/2 Ton Truck and Cherokee Chief Bill of Material Numbers 1974-1976: 603464, 603465, 603633
1977 Early: 603464 (These have wheel hubs with 3-1/8" diameter inner races. Axle Tube Diameter is 2-3/4".)
1977 Late: 610017 (mid to late production. Wheel hubs have inner races that are just under 3-1/4" diameter )
1978-79: 603685
1980: 610089
1981-1985: 610139
1982-1984: 610158 (with vacuum controlled Central Axle Disconnect)
1986: 610246
1987-1988: 610284

J-20 3/4 Ton Truck Bill of Material Numbers 1974-1976: 603466
1977 Early: 603466 (These have external mount wheel hubs.)
1977 Late: 610017 (Wheel hubs are internally splined)
1978-1979: 603685
1980: 610089
1981-1985: 610139
1986: 610248
1987-1988: 610285

Axle Assemblies and Axle Housings

top_page

QU40678U Used 1974-1977.5 Jeep Wagoneer and Cherokee Front Axle Housing For 1974-1977 Wagoneer and narrow track Cherokee 4x4s with disc front brakes and 2-3/4" diameter axle tubes. More Info

$125.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shafts

top_page
product note

All 1974-1991 Jeep J-Series full size 4x4s have Dana 44 front axles. Jeep Wagoneers and standard Cherokees have narrow track front axles that are about 4" narrower than the wide track axles used on J10, J20 trucks and Cherokee Chiefs. The inner axle shafts are not interchangeable between narrow track and wide track front axles. 1974-1976 J-Series models with drum brakes have shorter outer axle shafts compared to those used on J-Series Jeeps with disc brakes.

photo
QU40680U Used 1974-1979 Jeep Narrow Track J-Series Left Inner Axle Shaft For 1974-1979 Wagoneer and narrow track Cherokee Dana 44 front axles with either disc or drum front brakes
$79.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40682U Used 1974-1979 Jeep Narrow Track J-Series Right Inner Axle Shaft For 1974-1979 Wagoneer and narrow track Cherokee Dana 44 front axles with either disc or drum front brakes
$69.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU42011 1974-1979 Jeep Wide Track J-Series Left Inner Axle Shaft Is a brand new, genuine Dana drivers side (long) inner axle shaft for 1974-1979 J10 truck, J20 truck, and wide track Cherokee Chief Dana 44 front axles with either disc or drum front brakes
$295.01
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU42010 1974-1979 Jeep Wide Track J-Series Right Inner Axle Shaft Is a brand new, genuine Dana passenger (short) side inner axle shaft for 1974-1979 J10 truck, J20 truck, and wide track Cherokee Chief Dana 44 front axles with either disc or drum front brakes
$176.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40681U Used 1974-1991 Jeep Outer Axle Shaft for Disc Brake J-Series 4x4s Fits 1974-1991 Disc Brake equipped Jeep Wagoneer, Cherokee, Cherokee Chief, J10 Truck, and J20 Truck Dana 44 front axles.

More Info

$45.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

TK42153 Spicer Nickel Chromoly High Performance 19 Spline Right or Left Outer Axle Shaft for 1974-1976 Jeep Wagoneer with Dana 44 front axles.

More Info

$0.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

TK42154 Spicer Nickel Chromoly High Performance 30 Spline Right or Left Outer Axle Shaft for 1972-1986 Jeep CJ with Dana 44 front axles.

More Info

$0.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shaft Seals and Seal Kits for the Inner Axle Shafts

top_page
product note

Except for the 1982-1984 vacuum disconnect CAD axles in which the left Seal is at the end of the left axle tube, all Jeep J-Series models have Inner Axle Shaft Oil Seals pressed in the inboard end of each axle tube, right next to the differential side bearings. These seals contact the inner axle shafts to prevent gear oil from running out of the differential and down the axle tubes. Old age, blown axle u-joints, and/or grit that works it's way into the axle tubes and cuts the seal are the usual causes of failure. A bad Inner Axle Shaft Seal can be detected by oil coming out the end of the axle tubes next to the axle shaft u-joint. Usually when these Seals start to fail, they will seep oil so the leakage may go undetected for quite some time. Many a ring and pinion set has been burned up from axles that lost all their lube when long term seepage was not noticed. Several different Seals were used depending upon year and vehicle model. Except for QU40083 left CAD Axle Seal, axle disassembly including differential removal is required to replace the Seals.

photo
QU40055 1974-1977 Inner Axle Shaft Oil Seal With integral axle shaft guide for all 1974-1977 Jeep J-Series Dana 44 Front Drive Axles. One of these Seals are installed in each axle tube, right next to the differential to keep gear lube from leaking out the ends of the axle housing.

Please refer to QU40055 page for more details and ordering information.
$10.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4871 1974-1977 Jeep Dana 44 Axle Seal Kit with Fixed Depth Axle Seal Tool Set Quickly and easily installs QU40055 Inner Axle Seals to a precise depth in 1974-1977 Jeep Dana 44 Front Drive Axles. Our unique installer design will press in new your Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.

Please refer to QK4871 page for more details and ordering information.
$144.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40159 Inner Axle Shaft Seal for 1978-88 Jeep Cherokee Chief, J10, and J20 With the wide track, open knuckle, disc brake, Dana 44 front axles used on the pickup models and Cherokee Chiefs which can be identified by flared front fenders. Except for the 1982-1984 CAD axles, two of these seals are used, with one of Seal installed in each axle tube, right next to the differential to keep gear lube from leaking out the ends of the axle housing. For 1982-1984 axles with the vacuum controlled Central Axle Disconnect (CAD), QU40159 is the correct right axle Seal, order QU40083 for the left Seal.
Please refer to QU40159 page for more details and ordering information.
$7.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4830 1978-up Jeep Cherokee Chief, J10, and J20 Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set Quickly and easily installs QU40159 Inner Axle Seals in with the wide track, open knuckle, disc brake, Dana 44 front axles used on the pickup models and Cherokee Chiefs which can be identified by flared front fenders. Our unique installer design allows you press in new your Inner Axle Seals to a different depth to miss a groove worn in your axle shaft by the old seal. New Seal is installed without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell.
Please refer to QK4830 page for more details and ordering information.
$139.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40160 Inner Axle Shaft Seal for 1978-1991 Jeep Cherokee and Wagoneer With the narrow track, open knuckle, disc brake, Dana 44 front axles used on Wagoneers and standard Cherokees. Except for the 1982-1984 CAD axles, two of these seals are used, with one of Seal installed in each axle tube, right next to the differential to keep gear lube from leaking out the ends of the axle housing. For 1982-1984 axles with the vacuum controlled Central Axle Disconnect (CAD), QU40160 is the correct right axle Seal, order QU40083 for the left Seal.
Please refer to QU40160 page for more details and ordering information.
$16.25
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40083 Left Inner Axle Shaft Seal for 1982 to 1984 Jeep Full Size Wagoneer, Cherokee, J10, J20 Dana 44 Front Axles with CAD Fits the end of the left axle housing tube on 1982 to 1984 full size Jeep models with the vacuum controlled Central Axle Disconnect (CAD) system. The matching Bearing is QU50155 .

Please refer to QU40083 page for more details and ordering information.
$6.49
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QK4933 Front Inner Axle Seal and Install Tool Kit for Dana 44 axles with QU40160 2-5/8" Outside Diameter axle shaft seals.
More Info

$134.19
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Universal Joints

top_page
product note
We offer two different types of Universal Joints for your hard working 1974 to 1991 Jeep J-Series 4x4 with a Dana 44 solid front axle. Both are good, reliable products, but different manufacturing techniques and seal types will have a major influence on the ultimate life of the joint. Our most popular choice is our TK40712 cold-forged, non-greaseable, original equipment replacement U-Joint. The wear-resistant cold-forged cross and superior sealing make it the best choice for both low maintenance and long life.QU90007 has a hot-forged cross and is equipped with single lip seals. It is greaseable through a flush fitting threaded into one of the caps. With good maintenance and quality lubricant like our QU90018 Pyroplex® Plus Grease, these joints will last and last. Click on the Part Number Links to see our individual product pages for more info
photo
QU90007 Greaseable Axle U-Joint with Rubber Seals for 1974-1991 Jeep J-Series Dana 44 Front Axles Value priced with Hot-Forged cross and flexible rubber seals.

Please refer to QU90007 page for more details and ordering information.
$33.78
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK40712 Premium Torque King® Cold-Forged Non-Greaseable Axle U-Joint for 1974-1991 Jeep J-Series Dana 44 Front Axles Is a premium, quality factory lubed universal joint for your heavy-duty 4x4. TK40712 is our best selling u-joint for this application because it combines the strength of a solid, cold-forged cross with excellent seals and a maintenance free, factory-lubed design that meets or exceeds all original equipment specifications.

Please refer to TK40712 page for more details and ordering information.
$41.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ball Joints

top_page
product note
The 1974-1991 Jeep Dana 44 Beam Type open knuckle front axle uses replaceable Ball Joints pressed into the steering knuckle. Both Ball Joints are weight bearing. A threaded adjuster that screws into the upper hole of the axle yoke is used to provide preload on the Ball Joints. Dana has modified the seal configuration on the current production parts, but the high quality and basic Ball Joint design has remained unchanged since the early 1970's. Over the years we have found the average Ball Joint life of our non-greaseable, factory Dana Ball Joints to be 7 to 10 years for vehicles used as daily drivers and/or work vehicles
photo
QU40187 Original Equipment Ball Joint Set for 4x4 Bolt Front Axles Are the current production original equipment, factory lubed, Upper and Lower Ball Joints with hardware for 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40187 page for more details and ordering information.
$79.16
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Brake Parts

top_page
QU30213U Used 1/2 To Caliper Support and Brake Shield For 1974-1976 Jeep Wagoneers, Cherokees, and J10 1/2 ton trucks is a serviceable used part for your vintage Jeep 4x4 with disc brakes and 6 bolt wheels. Shield has hole for 1/4" bolt. Bolt hole is equidistant from adjacent spindle bolt holes so part will fit either left or right side
$25.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings (Individual)

top_page
product note
All 1974 to 1991 Jeep Dana 44 Front Axles in full size Wagoneers, Cherokees, and J10, J20 Pickups use the same differential and pinion bearings.
All bearings are not created equal for fit or durability, so we only stock first class, long lasting, Timken® Differential and Pinion Bearings for your Dana front axle. Timken® was and is a a major original equipment supplier of top-notch bearing components to Dana Spicer. Since I first started rebuilding Dana axles in the mid 1970's, I have found Timken® Bearings to be the most consistent in relation to the published dimensions of any bearing on the market which makes rebuilding an axle right the first time a WHOLE lot easier!
photo
QU50533 Timken® Outer Pinion Bearing Cup For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU50533 page for more details and ordering information.
$9.32
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50534 Timken® Outer Pinion Bearing For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU50534 page for more details and ordering information.
$20.96
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50535 Timken® Inner Pinion Bearing Cup For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU50535 page for more details and ordering information.
$11.64
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50536 Timken® Inner Pinion Bearing For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU50536 page for more details and ordering information.
$26.22
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50538 Timken® Differential Side Bearing For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles. (uses 2)

Please refer to QU50538 page for more details and ordering information.
$17.72
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50537 Timken® Differential Side Bearing Cup For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles. (uses 2)

Please refer to QU50537 page for more details and ordering information.
$12.36
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Bearing and Seal Kits

top_page
product note
All 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 used open knuckle Dana 44 Front Axles. Many of these vehicles have full time transfer cases so bearing wear issues on front axles can be expected on higher mileage trucks. With a full time transfer case, both axles are always powered during operation. If your vintage Jeep has over 150, 000 miles on it, there is a good chance that significant bearing wear may have occurred on your differential and pinion bearings. When you replace the bearings, do not forget to replace the inner axle shaft oil seals.
photo
QU50576 Differential Bearing and Seal Kit For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles features first class Timken® Differential and Pinion Bearings, Pinion Seal, Pinion Nut, Crush Sleeve, Gear Marking Compound, Threadlocker, and RTV Sealant.

Please refer to QU50576 page for more details and ordering information.
$149.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Parts

top_page
product note
All 1974-1991 Jeep Dana 44 Front Axles were factory equipped with conventional open differentials. Depending upon the year, model and transmission, both full time and part time transfer cases were used to drive the front axle. In vehicles having full time transfer cases in which the front axle is always under power when driving, wear on the thrust washers and cross shaft can be expected on higher mileage vehicles. The differential small parts are the same for all ratios, but the ring gear flange on the case castings are different for 3.73 and numerically lower ratios and axles having 4.09 and numerically higher ratios due to the pinion gear diameter size for high and low ratios
photo
QU40000 Dana 44 Pinion Mate Thrust Washer Is a genuine Dana hardened concave thrust washer that fits between each of the small diameter pinion mate gears in your 1974-1991 Jeep Dana 44 open differential.


Please refer to QU40000 page for more details and ordering information.
$2.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40033 Dana 44 Side Gear Thrust Washer Is a genuine Dana hardened flat thrust washer that fits between each of the splined differential side gears in your 1974-1991 Jeep Dana 44 open differential (EXCEPT 1982-1984 vehicles with vacuum controlled Central Axle Disconnect).

Please refer to QU40033 page for more details and ordering information.
$4.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40001 Dana 44 Differential Cross Shaft Retaining Pin Is a genuine Dana spring steel Pin used to retain your differential cross shaft in the diff case for 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40001 page for more details and ordering information.
$7.81
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40003 Dana 44 Differential Cross Shaft Is a genuine Dana hardened steel shaft that acts as the axle for the two small pinion mate gears for all 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40003 page for more details and ordering information.
$17.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU30170U Loaded Differential Case For Dana 44 with 3.92 to 5.89 ratio gear sets and 30 spline axle shafts.


Please refer to QU30170U page for more details and ordering information.
$115.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40632 Empty Differential Case Kit For Dana Model 44 3.73 and numerically lower ratios. Includes ring gear bolts and diff shims.

Please refer to QU40632 page for more details and ordering information.
$129.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU40633 Loaded Differential Case Assembly For Dana Model 44 3.73 and numerically lower ratios. Includes spider gears, diff bearings, ring gear bolts and diff shims.

Please refer to QU40633 page for more details and ordering information.
$381.82
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU40634 Empty Differential Case Kit For Dana Model 44 3.92 and numerically higher ratios. Includes ring gear bolts and diff shims.

Please refer to QU40634 page for more details and ordering information.
$129.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU40635 Loaded Differential Case Assembly For Dana Model 44 3.92 and numerically higher ratios. Includes spider gears, diff bearings, ring gear bolts, and diff shims.

Please refer to QU40635 page for more details and ordering information.
$366.64
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets and Gasket Makers

top_page
product note
In the mid 1970's Dana made a differential cover design change to heavy gauge covers with flat mating flanges. Unlike the previous, thin gauge covers with embossed flanges which were made for use with a cut gasket, the new design, thick gauge covers are designed for sealing with RTV. If you desire, you can still use a gasket with the new type cover by combining the gasket with thin films of RTV. We stock both Ultra Gray RTV Sealant and genuine Dana Gaskets.
photo
TK40573 Torque King® 6 Bolt Front Hub Gasket For 1974-1977.5 Jeep J-20, 3/4 ton 4x4 truck with a Open Knuckle Dana 44 Axle having 6 Bolt external mount lockout hubs is a brand new, precision cut, high-tech hub gasket.

Please refer to TK40573 page for more details and ordering information.
$6.87
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40214 Dana 44 Cover Gasket Is a genuine original equipment Dana Gasket for all Dana-Spicer Model 44 axles

Please refer to QU40214 page for more details and ordering information.
$7.58
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes.

Please refer to S82194 page for more details and ordering information.
$8.85
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hubs and Hub Parts

top_page
photo

QU51181 Warn 20990 Premium Hub Set for Dana 44 Front Axles With internally splined front wheel hubs. Reliable and good looking. QU51181 Fits most Jeep J-Series Full Size 1974-1991 with Dana 44 front axle.

More Info

$129.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU56018 Warn Manual Hub Set S a reliable, original equipment quality hub set with installation hardware for all part time transfer case equipped 1974-1991 Jeep J-Series Cherokee, Wagoneer, Grand Wagoneer 4x4s. Also fits 1974-1988 J10 and 1977-1988 J20 pickups.

Please refer to QU50618 page for more details and ordering information.
$99.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU56019 1 Side Warn Manual Hub Set
Please refer to QU50619 page for more details and ordering information.
$80.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4918 Hub Service Kit For QU56018 Warn Manual Hub Set.


Please refer to QK4918 page for more details and ordering information.
$36.84
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU30163U 1st Design 3/4 Ton Used Hub and Rotor Assembly For 1974-1977.5 Jeep J20 3/4 ton trucks with Dana 44 front axles and bolt-on, externally mounted hublocks or drive flanges. These good used assemblies have good bearing bores and rotors that are above the legal minimum thickness. Order QU50101 Wheel Seal, QU50569 Inner Bearing, QU50568 Inner Cup, QU50447 Outer Cup, and QU50448 Outer Bearing separately.

Please refer to QU30163U page for more details and ordering information.
$199.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50834 2nd Design 3/4 Ton Hub and Rotor For all 1977-1988 Jeep J20 3/4 ton 4x4s is a high quality replacement 8 bolt hub assembly that includes new studs, a precision ground rotor, and inner bearing cups.

Please refer to QU50834 page for more details and ordering information.
$226.04
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40654U Split Dana 44 Hub Drive Gear Spacer Is a good used split Steel Spacer that fits between your outer wheel bearing and hub drive gear on many 1980's Dodge and Jeep 4x4s with Dana 44 front axles.

Also available while supplies last: QU40656U Used 1.29" Solid Tube Hub Drive Gear Spacer
photo

QU40427 Dana 44 Full-Time Front End Hub Cap for 1974-1991 Cherokee, Wagoneer, 1974-1988 J10, and 1977.5-1988 J20 Jeeps with Dana 44 open knuckle front axles. More Info

$19.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Manuals and Technical Information

top_page
product note
Dan the Gear Man® Product Note: Knowing how to do the job right the first time is half the battle. With our detailed, easy to read, and well illustrated technical publications, you get accurate service procedures, torque specifications, and tool recommendations.
photo
TM4400 Pinion and Differential Bearing Service On Dana-Spicer Monobeam Axles Covers step by step in text and photos the differential service procedures, specifications, and tools needed to replace differential and pinion bearings in Dana Spicer front or rear drive axles.

Please refer to TM4400 page for more details and ordering information.
$20.95
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous Parts

top_page
photo
QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.

Please refer to QU90009 page for more details and ordering information.
$6.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Seals and Pinion Yokes

top_page
photo
QU40215 Dana 44 Front Axle Pinion Seal Is a genuine original equipment pinion seal for all 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40215 page for more details and ordering information.
$19.23
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Ring and Pinion Kits

top_page
QU40177 Genuine Dana 4.09 Ring and Pinion Kit With pinion bearings, pinion seal, and small parts for standard Dana 44 axles. Use with 26 spline pinion yoke.

Please refer to QU40177 page for more details and ordering information.
$386.17
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU40447 Genuine Dana 3.54 Ring and Pinion Kit With pinion bearings and small parts for Dana 44
$334.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
product note
Sometimes, you just need one or two small parts to get back on the road. Between the small parts listed in this section and many others listed under part specific headings elsewhere on the page, we probably have that pesky little part you have to have but just can't find anywhere else
photo
QU50155 Left Inner Axle Shaft Support Bearing for 1982 to 1984 Jeep Full Size Wagoneer, Cherokee, J10 Dana 44 Front Axles with CAD Fits at the end of the left axle housing tube on 1982 to 1984 full size Jeep models with the vacuum controlled Central Axle Disconnect (CAD) system. The matching Oil Seal is QU40083 .

Please refer to QU50155 page for more details and ordering information.
$14.55
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40209 Dana 44 Ring Gear Bolt For Dana 44 Axles. Genuine Dana-Spicer Grade 9 Bolt has locking teeth under the hex head to prevent loosening under any load conditions.

Dan the Gear Man® Safety Note: Ring Gear Bolts are designed for a single use. They must be replaced after they are removed!

Please refer to QU40209 page for more details and ordering information.

$1.25
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40343 Dana 44 Hardened Differential Cap Retaining Bolt Genuine original equipment hex-head bolt for Dana Spicer Model 44 front axle differential bearing caps fits all 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40343 page for more details and ordering information.
$2.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40028 Dana 44 Inner Pinion Bearing Slinger Is a genuine Dana original equipment Oil Slinger. QU40028 fits between your Dana 44 axle's inner pinion bearing and pinion head.

Please refer to QU40028 page for more details and ordering information.
$4.67
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40448 Dana 44 Inner Pinion Bearing Oil Baffle Is a genuine Dana original equipment stepped, stamped steel Oil Baffle. QU40448 fits between your Dana 44 axle's inner pinion bearing cup and the axle housing on 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40448 page for more details and ordering information.
$2.67
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40002 Outer Pinion Bearing Slinger QU40002 is a genuine Dana-Spicer part that fits between the outer pinion bearing and pinion yoke on 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40002 page for more details and ordering information.
$3.60
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40311 Dana 44 Front Differential and Pinion Shim Kit For 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles. Genuine Dana-Spicer Shim Kit includes pinion depth shims, pinion preload shims, differential adjusting shims, pinion nut, pinion washer, and differential cover pan gasket.

Please refer to QU40311 page for more details and ordering information.
$46.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40010 Dana 44 Axle Pinion Washer Is a genuine Dana-Spicer flat washer that fits between the pinion nut and pinion yoke on 1974-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1974-88 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles.

Please refer to QU40010 page for more details and ordering information.
$2.96
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40009 Dana 44 Axle Pinion Lock Nut Is a genuine Dana-Spicer original equipment all metal replacement part that is plated for corrosion protection.

Please refer to QU40009 page for more details and ordering information.
$3.97
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40654U Split Dana 44 Hub Drive Gear Spacer Is a good used split Steel Spacer that fits between your outer wheel bearing and hub drive gear on many 1980's Dodge and Jeep 4x4s with Dana 44 front axles.

Also available while supplies last: QU40656U Used 1.29" Solid Tube Hub Drive Gear Spacer
$14.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindles and Spindle Nuts

top_page
product note

All 1974-1991 Jeep Dana 44 front axles had round, four slot spindle nuts from the factory. These parts can typically be reused, but you MUST always check the pin in the Inner Nut. IF the pin is damaged or broken, REPLACE THE NUT!!!

photo
QU40004 Inner Spindle Nut For 1974-1991 Jeep Full Size J-Series Dana 44 Front Axle threads on the spindle and fits against your outer wheel bearing to provide correct wheel bearing end-play.

Please refer to QU40004 page for more details and ordering information.
$15.96
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40060 Spindle Lock Washer For 1974-1991 Jeep Full Size J-Series Dana 44 Front Axle locks your QU40004 Inner Spindle Nut in position when properly installed.

Please refer to QU40060 page for more details and ordering information.
$3.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40031 Outer Spindle Nut For 1974-1991 Jeep Full Size J-Series Dana 44 Front Axle is tightened against your QU40060 Spindle Lock Washer to keep the it in place and it acts as a jam nut effectively locking both spindle nuts and the washer together.

Please refer to QU40031 page for more details and ordering information.
$14.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4727 Spindle Nut Kit For 1974-1991 Jeep Full Size J-Series Dana 44 includes one each of QU40004 Inner Spindle Nut, QU40060 Spindle Lock Washer, and QU40031 Outer Spindle Nut.

Please refer to QK4727 page for more details and ordering information.
$19.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU15023 1/2 ton Dana 44 Front Spindle Kit for 1974-1977.5 Disc Brake Equipped Jeep Cherokee, Cherokee Chief, Wagoneer, and J10 Trucks Is a genuine original equipment replacement part for Jeep wagons and J10 4x4 truck models with front disc brakes and axle housing tubes that have an outside diameter of 2-3/4". QU15023 Spindle Kit includes Spindle, Spindle Bearing, Spindle V-Seals, and Axle Shaft Thrust Washer.

Also available while supplies last QU15023U Good Used Spindle Kit

$369.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU40323J/QU40323U/Y440323J 3/4 ton Dana 44 Front Spindle Kit for 1974-1977.5 Jeep J20 Trucks for Jeep J20 4x4 truck models with bolt-on type external mount front wheel hubs. New Spindle Kits include Spindle, Spindle Bearing, Spindle V-Seals, and Axle Shaft Thrust Washer. More Info

photo

QU40313J/QU40313U/Y440313J Dana 44 Front Spindle Kit for 1977.5-1991 Jeep full-size 4x4s is for Cherokee, Wagoneer, J10 and J20 4x4s with internally splined front wheel hubs. For 1977 axles, QU40313 is the correct spindle for your Jeep if the outside diameter of your axle housing tubes are 2-15/16". New Spindle Kits include Spindle, Spindle Bearing, Spindle V-Seals, and Axle Shaft Thrust Washer. More Info

QU42007J/QU42008U/Y442007J 1974-1976 Jeep J-Series Dana 44 Drum Brake Front Spindle Kit for drum brake equipped Dana 44 front drive axles in 1974-1976 Jeep Wagoneer, Cherokee, and J-10 4x4s. New Spindle Kits included spindle seal, spindle thrust washer, and factory installed spindle bearing. More Info

Spindle Bearings and Seals

top_page
product note
Although Jeep Parts Books show a 2" ID V-Seal for 1974-1979, I can not recall seeing any of Jeeps with the 2" Seal, all had the 2-1/4" ID Seal. In the early 1980's, we did get some Spindle Kits for 1974-1976 drum brake Cherokees on a closeout deal from Jeep that did include the 2" Seal so we are listing it and the small Slinger in case you need one for an early production axle, but most if not all 1974-1976 and ALL 1977 and newer J-Series axles have the 2-1/4" Seal and Thrust Washer set-up
photo
QU20040 2" ID Dana 44 Open Knuckle V-Seal Spindle Seal May fit some 1973-1976 Jeep 4x4's.


Please refer to QU20040 page for more details and ordering information.
$38.28
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40324 2" OD Dana 44 Small Outer Axle Shaft Slinger May fit some 1973-1976 Jeep 4x4's. Diameter of seal surface is 2".

Please refer to QU40324 page for more details and ordering information.
$49.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4734 Front Axle Shaft Spindle Bearing Set Fits 1974 to 1991 Jeep Cherokee, J10, J20, and Wagoneer Dana 44 front open knuckle axles. One bearing is pressed into each spindle to support the outer axle shaft.

Please refer to QK4732 page for more details and ordering information.
$25.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40232 Early Type Brass Axle Shaft Thrust Washer Measure just under 1.875" outside diameter. This thrust washer may fit some 1973-1976 Jeep 4x4's.

Please refer to QU40232 page for more details and ordering information.
$16.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40056 Small Spindle to Axle Shaft V-Seal Is a genuine original equipment 1-5/16" ID Rubber V-Seal that is installed in your spindle between QK4734.5 Spindle Bearing and QU40070 Spindle Thrust Washer. Fits 1974 to 1991 Jeep Cherokee, J10, J20, and Wagoneer Dana 44 front open knuckle axles.

Please refer to QU40056 page for more details and ordering information.
$7.15
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40070 Axle Shaft to Spindle Thrust Washer Is a genuine original equipment plastic thrust washer that controls axial thrust between your outer axle shaft and spindle. Fits 1974 to 1991 Jeep Cherokee, J10, J20, and Wagoneer Dana 44 front open knuckle axles.

Please refer to QU40070 page for more details and ordering information.
$4.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40071 2-1/4" Large Axle Shaft to Spindle V-Seal Is a genuine original equipment 2.25" ID Rubber V-Seal that seals between your axle shaft and spindle. Fits 1974 to 1991 Jeep Cherokee, J10, J20, and Wagoneer Dana 44 front open knuckle axles.

Please refer to QU40071 page for more details and ordering information.
$11.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4739 Spindle Seal Kit Services both sides on your 1974 to 1991 Jeep Cherokee, J10, J20, and Wagoneer Dana 44 front open knuckle axles.

Please refer to QK4739 page for more details and ordering information.
$45.78
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40228 Spindle Bearing and Seal Kit Services one side on your 1974 to 1991 Jeep Cherokee, J10, J20, and Wagoneer Dana 44 front open knuckle axles.

Please refer to QU40228 page for more details and ordering information.

$19.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40058 2-1/4" OD Outer Axle Shaft Slinger Acts both as a crud deflector and a sealing surface on open knuckle axles. Replace anytime they are dinged, bent or badly corroded. Fits 1974 to 1991 Jeep Cherokee, J10, J20, and Wagoneer Dana 44 front open knuckle axles.

Please refer to QU40058 page for more details and ordering information.
$6.68
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Steering Knuckles

top_page
QU15018U Used 1974-1977.5 Left Steering Knuckle for Disc Brake Equipped for Jeep Cherokee, Cherokee Chief, Wagoneer, J10 Truck, and J20 Truck Is a good used bare left (drivers) side Steering Knuckle for 1974-1977.5 Jeep wagons and 4x4 truck models with front disc brakes and axle housing tubes that have an outside diameter of 2-3/4"
$95.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU15019U Used 1974-1977.5 Right Steering Knuckle for Disc Brake Equipped for Jeep Cherokee, Cherokee Chief, Wagoneer, J10 Truck, and J20 Truck Is a good used bare right (passenger) side Steering Knuckle for 1974-1977.5 Jeep wagons and 4x4 truck models with front disc brakes and axle housing tubes that have an outside diameter of 2-3/4"
$95.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Tools

top_page
photo

TS4933 Front Inner Axle Seal Installer Tool Set for Dana 44 front axle that use QU40160 2-5/8" OD Seals.
More Info

$124.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QT1012 4 Lug Spindle Nut Socket For all 1972-1989 Full Size Wagoneer, Cherokee, J10 and J20 Dana 44 open knuckle front axles in 4x4 trucks
More Info
Also available QT1012i 4 Lug Spindle Nut Socket

$49.37
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearings and Seals (Individual)

top_page
product note

The outer wheel bearings used on all 1974-1991 Jeep Dana 44 front axles are the same. For the wheel seal and inner wheel bearing, there are choices for 1977 and prior trucks depending upon the year and model of your 4x4. 1977 is the transition year where you could have either early or late bearing types. The two types ARE NOT interchangeable!

photo
QU50654 Drum Brake Inner Wheel Seal for 1974-1976 Jeep Dana 44 with Internal Spline Wheel Hub Fits all 1974-1976 Jeep Wagoneer, Cherokee, and J10 pickups with drum brakes.


Please refer to QU50654 page for more details and ordering information.
$14.25
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50091 Disc Brake Inner Wheel Seal for Jeep Dana 44 with Internal Spline Wheel Hub Fits all 1974-1991 Jeep Full Size J-Series Wagoneer, Cherokee, and J10 pickups plus 1977-1/2 to 1988 J20 3/4 ton truck. These vehicles will have Dana 44 Front Axles with Internally splined wheel hubs and disc brakes.

Please refer to QU50091 page for more details and ordering information.
$9.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50101 1974-1977.5 J20 Premium OE Type 3/4 ton Inner Wheel Seal For all 1974-1977.5 3/4 ton J-20 4x4s with 6 bolt external mount lockout hubs or drive flanges. QU50101 Premium OE Type Front Wheel Seal is interchangeable with QU50208 Flanged Front Wheel Seal.

Please refer to QU50101 page for more details and ordering information.
$13.99
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50208 1974-1977.5 J20 Flanged Inner Wheel Seal for Dana 44 with External Mount Wheel Hub Fits 1974-1977.5 3/4 ton J-20 4x4s with external type wheel hub. QU50208 Flanged Front Wheel Seal is interchangeable with QU50101 Premium Front Wheel Seal.

Please refer to QU40058 page for more details and ordering information.
$0.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50447 Timken® Outer Wheel Bearing Cup For all 1974-1991 Jeep Full Size J-Series Dana 44 Front Axles with either drum or disc brakes.


Please refer to QU50447 page for more details and ordering information.
$6.40
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50448 Timken® Outer Wheel Bearing For all 1974-1991 Jeep Full Size J-Series Dana 44 Front Axles with either drum or disc brakes.


Please refer to QU50448 page for more details and ordering information.
$13.77
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50577 Timken® Inner Wheel Bearing Cup for 1974-1977.5 1/2 ton Jeep 4x4s Fits 1974-1977.5 Jeep J-Series Cherokee, J-10, Wagoneer Dana 44 Front Axles with either drum or disc brakes.

Please refer to QU50577 page for more details and ordering information.
$9.11
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50578 Timken® Inner Wheel Bearing for 1974-1977.5 1/2 ton Jeep 4x4s Fits 1974-1977.5 Jeep J-Series Cherokee, J-10, Wagoneer Dana 44 Front Axles with either drum or disc brakes. Bearing inside diameter is 1-25/32".

Please refer to QU50578 page for more details and ordering information.
$13.91
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50568 Timken® Inner Wheel Bearing Cup for 1974-1977.5 3/4 ton Dana 44 with External Mount Wheel Hub Fits 1974-1977.5 3/4 ton J-20 4x4s with external type wheel hub. Inner Wheel Bearing Cup outside diameter is 3.5".

Please refer to QU50568 page for more details and ordering information.
$16.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50569 Timken® Inner Wheel Bearing for 1974-1977.5 3/4 ton Dana 44 with External Mount Wheel Hub Fits 1974-1977.5 3/4 ton J-20 4x4s with external type wheel hub. Inner Wheel Bearing Cup outside diameter is 3.5".


Please refer to QU50569 page for more details and ordering information.
$27.24
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50446 Timken® Inner Wheel Bearing Cup For all 1977.5-1991 fits all 1977.5-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1977.5-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles, Internally splined wheel hubs and disc brakes.

Please refer to QU50446 page for more details and ordering information.
$9.46
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50412 Timken® Inner Wheel Bearing For all 1977.5-1991 fits all 1977.5-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1977.5-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles, Internally splined wheel hubs and disc brakes.

Please refer to QU50412 page for more details and ordering information.
$14.46
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing and Seal Kits

top_page
product note

Jeep used four different combinations of wheel bearing and seals numbers for 1974 to 1991 Dana 44 front drive axles. The model and year breaks are:
1974-1976 Cherokee, J-10 Pickup, Wagoneer with front drum brakes use TK4911J/TK4912J
1974-1977-1/2 Cherokee, J-10 Pickup, Wagoneer with front disc brakes use TK4714J/TK4742J Kits
1974-1977-1/2 J-20 with external mount lockout hubs or drive flanges use TK4708J/TK4779J
1977-1/2-1991 All Models use TK4715J/TK4743J Kits
If you need a spindle nut socket, see QT1012 or QT1025 4 Lug Spindle Nut Sockets

photo
TK4911J/TK4912J 1974 to 1976 Jeep Wagon and 1/2 ton Torque King® Wheel Bearing Kits for Jeep Dana 44 Drum Brake Front Axles Fit for all 1974-1976 Jeep Wagoneer/Cherokee and J10 pickup 4x4s with drum brakes. TK4711J Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle. TK4912J Parts Only Kit includes the same great parts but no tools.
Please refer to TK4911J/TK4912J page for more details and ordering information.
photo
TK4714J/TK4742J 1974 to 1977.5 1/2 ton Torque King® Wheel Bearing Kits for Jeep Dana 44 Disc Brake Front Axles Fit for all 1974-1977.5 Jeep Wagoneer/Cherokee and J10 pickup with disc brakes. TK4714J Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle. TK4742J Parts Only Kit includes the same great parts but no tools.
Please refer to TK4714J/TK4742J page for more details and ordering information.
photo
TK4708J/TK4779J 1974-1977.5 3/4 Ton Wheel Bearing Kits for 1974-1977.5 Jeep J20 3/4 ton Dana 44 with External Mount Wheel Hub Fit 1974-1977.5 3/4 ton J-20 4x4s with Dana 44 front axles with external mount lockout hubs or drive flanges. TK4708J Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle. TK4779J Parts Only Kit includes the same great parts but no tools.
Please refer to TK4708J/TK4779J page for more details and ordering information.
photo
TK4715J/TK4743J 1977-1/2 to 1991 Torque King® Wheel Bearing Kits for Jeep Dana 44 Front Axles For all 1977.5-1983 Jeep Wagoneer/Cherokee, 1984-1991 Grand Wagoneer, and 1977.5-1988 J-10/J-20 4x4 trucks with Dana 44 open knuckle front axles. Do the job right the first time with premium quality parts and installation tools custom made for the job. TK4715J Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle. TK4743J Parts Only Kit includes the same great parts but no tools.
Please refer to TK4715J/TK4743J page for more details and ordering information.