Parts for Dana-Spicer Closed Knuckle Model 60 Front Axles in 1967-1969 Jeep M715 Trucks

We stock a limited selection of parts for the closed knuckle Dana 60 front axle used in 1967 to 1969 Jeep M715, M725, M726 series military 4x4 trucks. The M715 was the first production 4x4 to use a Dana 60 front axle. Jeep built roughly 33, 000 M715 series vehicles

Axle Shafts

top_page
photo
QU15012 Right Inner Axle Shaft For M715 Dana 60 30 Spline Axle Shaft


Please refer to QU15012 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU15013 Left Inner Axle Shaft For M715 Dana 60 30 Spline Axle Shaft


Please refer to QU15013 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU15014 M715 Left Axle Shaft Assembly For 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles Dana 60 Closed Knuckle Front Dive Axles.

Please refer to QU15014 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Axle Shaft Seals, Seal Kits, and Bushings

top_page
photo

QU40431 Large Spindle and Axle Shaft Bushing for 1967-1969 Jeep M715 Dana Spicer 60 Closed Knuckle Front Axles Is a flanged Bronze Bushing used in both the spindle and axle housing tubes to support the front axle shafts in 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Link to our QU40431 Web Catalog page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo

QU42015 Inner Axle Shaft Seal is an original equipment syle Inner Axle Shaft Oil Seal for 1967-1969 Jeep M715 Dana Spicer 60 Closed Knuckle Front Axles. One of these seals are located at the inboard end of each axle housing tubes in 1967-1969 Jeep M715, M725, and M726 military 4x4 Dana 60 Closed Knuckle Front Drive Axles. Order 2 Seals per vehicle. The axle shafts and differential must be removed from the housing to replace these seals. If present, reuse the original stamped steel axle shaft guides which are placed in the inboard end of the axle tube before the seal is installed.

Link to our QU42015 Web Catalog page.

Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Closed Knuckle Parts

top_page
product note

We stock the regular service closed knuckle parts for your 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with a Dana 60 Closed Knuckle Front Drive Axle which will have 12 bolt Knuckle Ball Hemisphere Seals. With a Closed Knuckle axle, the axle universal joints and king pin bearings are lubricated by very heavy oil or a viscous grease that will flow when the axle shafts rotate. A large multi-piece seal is bolted to the backside of the steering knuckle to keep lubricant in and water out. On poorly maintained closed knuckle axles or axles equipped with lockout hubs that are rarely used in 4x4, the upper king pin bearing and axle universal joint can suffer from lack of lubrication. The Ball Seals will usually weep some lubricant especially when standard gear oils are used. Submersion of the axle under water or condensation from temperature changes can cause moisture to build up inside the enclosed ball and lead to corrosion damage and part failures

photo

QA4936 Replacement 12 Bolt Knuckle Ball Seal Kit for Dana Spicer Front Axles is for 1967-1969 Jeep M715, M725, M726 Military vehicles with Dana 60 Closed Knuckle front drive axles. Kit includes split metal backed ball seal, felt wiper seal, metal backing plates and 12 new serrated, flange head cap screws. Two kits required to service both sides of your front axle assembly. Assembled in USA of both genuine Dana and replacement parts. NOTE: QA4936 replaces QU40189 100% Dana Ball Seal Kit which is out of production and no longer available.

More Info

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4765 Jeep M715 Dana 60 Knuckle Preload Shim Kit For 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles. Kit includes 11 shims total.

Please refer to QK4765 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4616 Jeep M715 Dana 60 Closed Knuckle Bearing and Bushing Kit includes Two upper Knuckle Bushings. two Knuckle Bearings, four Knuckle Bearing Cups, and Preload Shims for 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QK4616 page for more details and ordering information.
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QK4618 Jeep M715 Spicer 60 Large Closed Knuckle Bearing Kit Includes four Knuckle Bearings, four Knuckle Bearing Cups, and Preload Shims for 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QK4618 page for more details and ordering information.
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50600 Timken® Knuckle Bearing For 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QU50600 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50601 Timken® Knuckle Bearing For 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QU50601 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40327 Jeep M715 Dana 60 Upper King Pin/Knuckle Bushing For Dana 70 closed knuckle front axles in 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles.

Please refer to QU40327 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40543 Jeep M715 Dana 60 Upper King Pin Key For Dana 60 closed knuckle front axles in 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles.


Please refer to QU40543 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
TK50785 Torque® King Timken® Large Closed Knuckle King Pin Bearing Kit For Jeep Dana 60.


Please refer to TK50785 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Bearing and Seal Kits

top_page
photo
QU50491 Differential Bearing & Seal Kit for Dana Model 60 Front Axles in all 1967 to 1969 Jeep M715, M725, and M726 military 4x4 trucks. This kit includes: QU50400 Outer Pinion Bearing Cup, QU50401 Outer Pinion Bearing, QU50406 Inner Pinion Bearing Cup, QU50407 Inner Pinion Bearing, 2 QU50397 Differential Bearing Cups, 2 QU50398 Differential Bearings; QU51065 early and QU50565 late, aftermarket pinion seal; QU50566 aftermarket pinion nut, QU50567 aftermarket differential and pinion shim kit; and QU90009 axle service pack. Contains USA and imported parts
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets and Gasket Makers

top_page
photo
QU40367 Jeep M715 Dana 60 Front Differential Cover Gasket Genuine Dana gasket is precision cut specifically for the Model 70 series axles, but is also the official OEM replacement for the now discontinued Model 60 diff cover gasket. High grade, crush resistant gasket material with clean die cuts and no hanging chads.

Please refer to QU40367 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU15006 Jeep M715 Dana 60 6 Bolt Front Hub Gasket Works with either the original splined drive flanges or aftermarket Selectro/Dualmatic hubs.

Please refer to QU15006 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Hubs and Hub Parts

top_page
product note
Jeep M715/M725/M726 1-1/4 ton military vehicles all had solid splined hub drive flanges from the factory. Once these vehicles hit the civilian market, many owners elected to replace the drive flanges with lockout hubs for increased fuel economy. Most of these lockouts were made by Dualmatic/Selectro which were less than 1/2 the price of a set of Warn hubs
photo
QU15006 Jeep M715 Dana 60 6 Bolt Front Hub Gasket Works with either the original splined drive flanges or aftermarket Selectro/Dualmatic hubs.


Please refer to QU15006 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous Parts

top_page
photo
QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.
Please refer to QU90009 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo
QU40022 Pinion Nut

Please refer to QU40022 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40023 Hardened Pinion Flat Washer

Please refer to QU40023 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40086 Ring Gear Bolt

Please refer to QU40086 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40099 Outer Pinion Slinger

Please refer to QU40099 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindles and Spindle Nuts

top_page
product note
As far as I know, the spindle used on the M715 series trucks is unique to this application. The spindle nuts and lock washers were used on some other vehicles
photo
QU15008 1967-1969 Jeep M715 Front Spindle for Dana 60 Closed Knuckle Front Axle Is a genuine New Old Stock (NOS) original equipment spindle with pressed in QU40431 axle shaft support bushing for the Dana 60 closed knuckle front axles in all 1967 to 1969 Jeep M715, M725, and M726 military trucks.

Please refer to QU15008 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU15004 Flat Tab Spindle Lock Washer with Narrow Key Tab is a genuine New Old Stock (NOS) original equipment nonreusable Bend Over Tab Spindle Lockwasher for the Dana 60 closed knuckle front axles in all 1967 to 1969 Jeep M715, M725, and M726 military trucks

Please refer to QU15004 page for more details and ordering information.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU40052 Dana Axle 2" Thread x 2.5" Hex Spindle Nut Is a genuine Dana Spicer part that fits Dana 60 closed knuckle front axles in all 1967 to 1969 Jeep M715, M725, and M726 military trucks. Hex is 2.5" across the flats.


Please refer to QU40052 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindle Bushings

top_page
photo
QU40431 Large Spindle and Axle Shaft Bushing for 1967-1969 M715 Dana Spicer 60 Closed Knuckle Front Axles Is a flanged Bronze Bushing used in both the spindle and axle housing tubes to support the front axle shafts in 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles Dana 60 Closed Knuckle Front Dive Axles.

Please refer to QU40431 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearings and Seals (Individual)

top_page
photo
QU50396 M715 Timken® Inner Wheel Bearing Cup For all 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QU50396 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50398 M715 Timken® Inner Wheel Bearing For all 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QU50398 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU50876 M715 Timken® Outer Wheel Bearing Cup For all 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QU50876 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU50877 M715 Timken® Outer Wheel Bearing For all 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QU50877 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU50642 M715 Inner Wheel Seal For all 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to QU50642 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing and Seal Kits

top_page
TK8364 M715 Wheel Bearing and Seal Kit Is a complete, premium quality Front Wheel Bearing Kit that includes 2 Wheel Seals, 4 Timken Bearings, 4 Timken Bearing Cups, 2 Spindle Lock Washers, and 2 Hub Flange Gaskets. For all 1967-1969 Jeep M715, M725, and M726 military 4x4 vehicles with Dana 60 Closed Knuckle Front Drive Axles.

Please refer to TK8364 page for more details and ordering information.
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!