Parts for Dana-Spicer Model 70 Rear Axles in 1957-1970 Jeep® Trucks

Jeep used Dana 70 Rear Axles in 1957-1967 FC-170 Dual Rear Wheel (DRW), 1962-1970 J-Series DRW, and 1967-1969 M715 series military trucks. You can also find them in special purpose CJ models such as auger rigs, but these were probably added by aftermarket truck builders. Forward Control FC-170 duallys were popular overseas plus many special body versions were built for the government. With an available 84" cab to axle measurement, these trucks were very versatile for their time. Few survive today, but you can see them in the John Wayne African movie Hatari. The civilian J-Series trucks with duals were built with 9000 pound (1962-1964) and 8600 pound (1965-1970) GVW ratings. Only small numbers of J-Series and FC-170 DRW trucks were built and these are quite rare today. M715 series trucks have single rear wheels and GVW ratings of 8,400 to 9,400 pounds depending upon the body style and equipment. Around 32, 000 M715 and related trucks were built. Many were left in Vietnam or shipped to Israel, but currently finding a good M715 is not all that hard to do.

Axle Shafts and Axle Shaft Hardware

top_page
photo
QU40577 Tapered Locking Bushing Cone for Dana 70 Rear Axle Shafts Fits 1957-1969 Jeep Dana 70 rear axles in both civilian and military trucks. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.

Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing

Link to QU40577 Large Text Individual Product Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential and Pinion Bearings (Individual)

top_page
product note
Over the years, Dana has primarily used Timken bearings when building their axles. For long life and dimensional consistency, Timken bearings are unmatched by any other brand of bearing I have used rebuilding axles over the past 30+ years in the business. When you are a shade tree mechanic dealing with a diff and pinion rebearing job without all the fancy gauging tools we have, you always want your new bearings to be the same overall thickness as the original bearings were when the axle was built so your pinion depth, pinion preload and backlash are within the tolerance limits when you are done with the job. Timken bearings will almost always deliver that type of accuracy, plus the steel quality and surface finish is the world's best
photo
QU50400 Timken® Outer Pinion Bearing Cup For Jeep Dana 70 Dual Rear Wheel axles in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks, plus 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.

Please refer to QU50400 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50401 Timken® Outer Pinion Bearing For Jeep Dana 70 Dual Rear Wheel axles in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks, plus 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.

Please refer to QU50401 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50409 Timken® Inner Pinion Bearing Cup For Jeep Dana 70 Dual Rear Wheel axles in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks, plus 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.

Please refer to QU50409 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50602 Timken® Inner Pinion Bearing For Jeep Dana 70 Dual Rear Wheel axles in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks, plus 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.

Please refer to QU50602 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50397 Timken® Dana 70 Differential Bearing Cup For Jeep Dana 70 Dual Rear Wheel axles in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks, plus 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.

Please refer to QU50397 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50398 Timken® Dana 70 Differential Bearing For Jeep Dana 70 Dual Rear Wheel axles in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks, plus 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.

Please refer to QU50398 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Differential Parts (Open)

top_page
photo
QU15017 23 Spline Rear Internal Differential (Spider) Gear Set Is a genuine New Old Stock (NOS) Dana Gear Set for 1957-1970 Jeep Dana 70 Open Differential Rear Axles.

Please refer to QU15017 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Gaskets and Gasket Maker

top_page
photo
QU40367 Jeep Dana 70 Front Differential Cover Gasket Genuine Dana gasket is precisian cut specifically for the Model 70 series axles. High grade, crush resistant gasket material with clean die cuts and no hanging chads.

Please refer to QU40367 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU15003 8 Bolt Rear Hub Gasket For Jeep Dana 70 Dual Rear Wheel axles in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks. QU15003 also fits 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
S82194 Ultra Gray RTV Sealant Combines high adhesion and resistance to both conventional and synthetic gear lubes.

Please refer to S82194 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Manuals and Technical Information

top_page
product note
Dan the Gear Man® Product Note: Knowing how to do the job right the first time is half the battle. With our detailed, easy to read, and well illustrated technical publications, you get accurate service procedures, torque specifications, and tool recommendations.
photo
TM4400 Pinion and Differential Bearing Service On Dana-Spicer Monobeam Axles covers step by step in text and photos the differential service procedures, specifications, and tools needed to replace differential and pinion bearings in Dana Spicer front or rear drive axles.

Please refer to TM4400 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Miscellaneous

top_page
photo
S24200 Blue Threadlocker For pinion nuts and ring gear bolts etc.


Please refer to S24200 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90008 Gear Marking Compound Use with QT9404 Brush to check your ring and pinion gear tooth pattern.


Please refer to QU90008 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
Anti-Seize Lubricant Use on suspension fasteners to prevent rust bonding.


Please refer to S9975 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90018 Pyroplex® Protection ES Synthetic Grease Provides extended service protection for king pin, axle universal joint, and wheel bearing applications under the harshest on and off road conditions!

Please refer to QU90018 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
SynPower ® is a superior quality, moly-fortified, Synthetic Bearing/Chassis Grease for all U.S., European, and Japanese Vehicles. Use on disc and drum brake wheel bearings, chassis, suspension, universal joints, and CV joints.

Please refer to Lubricants page for more details and ordering information.
photo
Syncon High Performance Synthetic Arctic Grease Is an extreme pressure, premium quality, synthetic cold weather grease that provides exceptional protection for bearings and chassis components in sub-zero weather.


Please refer to Lubricants page for more details and ordering information.
photo
707L Red Grease Is a premium, extreme pressure, high performance wheel bearing grease with special additives providing excellent rust protection and high resistance to water washout. 707L is an high quality, non-synthetic grease suitable for all 4x4 and light truck disc and drum brake wheel bearing applications, plus it is an ideal grease for chassis lubrication. Available in 14 oz. cartridge or 1 pound tub.


Please refer to 707L Red Grease page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU90009 Universal Axle Service Pack Is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.

Please refer to QU90009 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Pinion Seals and Yokes

top_page
photo
QU40768 U-Joint Strap and Bolt Kit For attaching a 1-1/16" diameter cup size rear driveshaft u-joint to the rear axle pinion yoke on many 1957 to 1970 Jeep® vehicles with Dana 70 rear axles.

Please refer to QU40768 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Small Parts

top_page
photo
QU40577 Tapered Locking Bushing Cone for Dana 70 Rear Axle Shafts Fits 1957-1969 Jeep Dana 70 rear axles in both civilian and military trucks. QU40577 is an aftermarket replacement split taper axle shaft cone that was redesigned to address the Cone becoming frozen in the tapered axle shaft holes.

Also available while supplies last: QU42009 Original Equipment Split Taper Locking Bushing

Link to QU40577 Large Text Individual Product Page.

Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Spindle Nuts and Spindle Hardware

top_page
photo
QU15004 Flat Tab Spindle Lock Washer Is an original equipment, nonreusable Bend Over Tab Spindle Lockwasher for Jeep Dana 70 Dual Rear Wheel axles with 2" spindle threads in 1957-1967 FC-170 and 1962-1970 J-Series Gladiator 1 ton trucks, plus 1967-1969 1-1/4 ton Jeep military M715-M725 series 4x4 trucks with single rear wheels.

Please refer to QU15004 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearings and Seals (Individual)

top_page
product note
We stock first class, original equipment Dana-Spicer Rear Wheel Seals and Timken® Rear Wheel Bearings for your vintage Jeep with a Dana 70 Rear Axle. The outer wheel bearings are the same for all models, but the inner bearing and wheel seal used on the M715 5/4 ton trucks is larger than those used on the 1 ton civilan Jeeps with Dual Rear Wheels (DRW)
photo
QU50568 Timken® Outer Rear Wheel Bearing Cup For Jeep M715 and dual rear wheel FC170 and J300 trucks.

Please refer to QU50568 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50569 Timken® Outer Rear Wheel Bearing For Jeep M715 and dual rear wheel FC170 and J300 trucks.


Please refer to QU50569 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50396 DRW Timken® Inner Rear Wheel Bearing Cup For Jeep dual rear wheel FC170 and J300 trucks.


Please refer to QU50396 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50398 DRW Timken® Inner Rear Wheel Bearing For Jeep dual rear wheel FC170 and J300 trucks.


Please refer to QU50398 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50402 Timken® Inner Rear Wheel Bearing Cup for Jeep M715 Series 4x4 military trucks.


Please refer to QU50402 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
photo
QU50403 Timken® Inner Rear Wheel Bearing for Jeep M715 Series 4x4 military trucks.


Please refer to QU50403 page for more details and ordering information.
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!
QU50717 Rear Wheel Seal for Jeep M715 Series 4x4 military trucks.


Please refer to QU50717 page for more details and ordering information.
Out of Stock
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

Wheel Bearing and Seal Kits

top_page
product note
The rear wheel bearings in Jeep Dodge Dana 70 Rear axles average about 150, 000 miles before requiring replacement. Torque King® Premium Rear Wheel Bearing and Seal Kits for your vintage Jeep feature premium Timken® bearings and original equipment quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls. To help you install these vital components properly, Torque King® Master Kits include bearing cup and wheel seal installers. Why use makeshift installation methods that can damage precision surfaces when affordable tools are available to do the job right the first time?
photo
TK8339 Parts Only Torque King® Premium Rear Wheel Bearing and Seal Kit For 1967 to 1969 Jeep M715, M725, M726 military 1-1/4 ton 4x4 Dana 70 rear axles. Kit includes Timken® Wheel Bearings, Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.

Please refer to TK8339 page for more details and ordering information.
TK8338 Master Torque King® Premium Rear Wheel Bearing and Seal Kit With install tools for 1967 to 1969 Jeep M715, M725, M726 military 1-1/4 ton 4x4 Dana 70 rear axles. Kit includes Timken® Wheel Bearings, Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.

Please refer to TK8338 page for more details and ordering information.