QT1002 CAD Inner Axle Seal Installer for Dodge Dana 44 and Dana 60 Front Axles


QT1002 Adjustable Depth Inner Axle Shaft Seal Installer for CAD Front Axles is our most popular Inner Axle Seal Installer. It is used on most 1988-2001 Dodge full-size trucks with Central Axle Disconnect to install the QU40105 original equipment NOK made seal for the large diameter disconnect axle shaft. Custom-fit Seal Installer is specifically made to install Central Axle Disconnect (CAD) side axle shaft oil seal easily and without damaging the seal. Precision CNC machined right here in Montana, this Adjustable Depth Installer is used in conjunction with QT1048 Rod and QT1047 Thrust Plate to make successful installation of your tight fitting CAD seal simple, Easy, and straight forward. The seal fits the face-grooved Installer like a glove, so it will not cock or crush during installation. Also see our TS4620, TS4631 Tool Sets, and QK4620, QK4631 Tool and Seal Kits. Made here in Roberts, Montana U.S.A.

Click HERE for Tool Features


Adjustable Depth Right Inner Axle Shaft Seal Installer
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

Dan the Gear Man® Tech Note 1:
Successfully installing a CAD seal without the correct Seal Installer has about the same chance of success as buying a winning lottery ticket. Makeshift methods don't usually get the job done due to the restricted area you need to work in, and the amount of compression needed to be applied to the seal. Due to the way we have to make the Tool, your Seal Installer and Seal MUST match. QT1002 will only work with original equipment design, NOK manufactured seals such as our QU40105 (Dodge p/n4506005). Seals manufactured by other seal manufacturers WILL NOT WORK WITH THIS INSTALLER!!!! If you have the green, CR manufactured QU40326 (Dodge 4506005AB) seal use our QT1114 Installer. We do not manufacture installers for this application to fit any other competitive seal designs such as National or NAK.

tech note

Dan the Gear Man® Tech Note 2:
We make two types of Seal Installers for your Ram 4x4: Adjustable Depth and Fixed Depth. The Installer on this page is an Adjustable Depth Installer that allows you to offset the seal to a deeper depth to miss a groove or other damage on the axle shaft. This Installer will work on both 1989 to 2001 Dana 44 and 1994 to 1999 Dana 60 axles. However, YOU MUST be careful you do not set the seal TOO DEEP which may place the seal beyond the axle shaft seal surface! Our Fixed Depth Seal Installer QT1190 will firmly stop at a preset depth. Fixed Depth Installers will only fit Dana 60 axles in 1994 to 1999 Ram 2500 and Ram 3500 4x4s. Choose our Adjustable Depth Seal Installer for installing seals in any 1989-2001 Dodge with a Model 44, or if you want the flexibility to offset the seals on 1994 to 1999 3/4 ton and 1 tons with the Dana 60. Choose our Fixed Depth Installers if you want quick, fool-proof seal installation on 1994 to 1999 Dana 60 equipped Ram 2500 and Ram 3500.

tech note

Dan the Gear Man® Tech Note 3:
Once the axle is disassembled, the old seals can be easily removed with our TS1184 Seal Remover Tool Set or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.

tech note

Dan the Gear Man® Tech Note 4:
Differential removal is required for the differential side seal, but not the the disconnect (CAD) side on vacuum shift axles. These are tricky seals to install, but you can EASILY do it with one of these kits! QT1133 differential case spreader is definitely recommended but not absolutely required for differential removal/installation. We also find QT9018 dead-blow sledge handy to reinstall the differential.

tech note

Dan the Gear Man® Tech Note 5:
Need tech help on how to perform inner axle seal replacement on your 1994-1999 Dodge Ram 2500 or Ram 3500? Get my TSB4620 Inner Axle Seal Replacement Tech Service Bulletin, a fully illustrated, 8 page publication with 31 color photos. Includes step by step service procedures, tool recommendations, and torque specifications for replacing those pesky front axle shaft seals on all 1994 to 1999 Dodge Ram 4x4 trucks with Dana-Spicer Model 60 front drive axles. Available in both print and instant download versions. TSB4620 is specific to Dana 60 axles, but with the exception of a unitized hub/rotor and 4 bolt hub flange, the service procedures are also applicable to 1994-2001 Ram 1500 and 1994-1997 Ram 2500 4x4s with Dana 44 front axles.


Left Axle Shaft Applications for Dodge:
1988-1993 Ramcharger, W150, and W250 (gasoline engine only)

Right Axle Shaft Applications for Dodge:
Dodge: 1994-2001 Ram 1500 Dodge: 1994-1999 All Ram 2500 and Ram 3500 trucks