QT2013 New Process NP205 Dummy Idler Shaft

photo

QT2013 NP205 Dummy Idler Shaft Tool is required to hold the idler shaft bearings, shims, and sleeve together when removing or installing the idler shaft on New Process NP205 transfer cases. An absolute necessity to keep your blood pressure down during a NP205 rebuild! Made in U.S.A.

QT2013
NP205 Dummy Idler Shaft
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

Dan the Gear Man® Tech Note 1:
QT2013 is the one must-have tool you will need to rebuild your NP205 transfer case. The idler shaft with the bearings, spacer, and shims, must be rolled into the case during reassembly. Keeping all those parts lined up without this tool is difficult to say the least.

tech note

Dan the Gear Man® Tech Note 2:
The QT2013 is a slip fit in the idler bearings so you must support the Dummy Shaft with one hand as you drive in the Idler Shaft. If the tool is not kept in contact with the Idler Shaft, a shim may shift and get caught by the idler shaft.

tech note

Dan the Gear Man® Tech Note 2:
The Idler Shaft Bearings on NP200, NP201, and NP205 Transfer Cases are the same, however, the Idler Gear is wider in the NP205 so this tool will not work in a NP200 or NP201 Transfer Case unless you shorten it.

tech note

Dan the Gear Man® Tech Note 4:
Matching Parts for QT2013 Idler Gear Dummy Shaft:
TK50347 Idler Gear Bearing
TK50346 Idler Gear Bearing Cup
QU20125 Idler Gear Spacer
TK2053 NP205 Idler Bearing Shim Kit
QU20126 Idler Shaft Cover
QU20127 Idler Gear Shaft Dummy Idler Shaft