QU10130 Small Bore Genuine New Process Rear Output Bushing

photo

QU10130 Small Bore Genuine New Process Rear Output Bushing is a genuine original equipment bushing for many General Motors New Process Transfer Cases in full size 4x4's from 1980-up and all 1994-2002 New Process NP241DLD Transfer Cases in Dodge Ram 1500 and Ram 2500 4x4 trucks. Also fits 1994-1997 NP241DHD transfer cases in Dodge Ram 2500 and Ram 3500 4x4 trucks with a slip yoke that is approximately 1-7/8" in diameter. Made in U.S.A.

QU10130
Small Bore Genuine NP Rear Output Bushing
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

These bushings can be changed without removing the transfer case from the vehicle. For Dodge applications, mark the location of the weep hole in the seal boot before removing the seal. You can remove the seal now or later depending upon which will be easiest for you. Unbolt and remove the rear extension piece from the transfer case. Use QT2050 Bushing Remover/Installer and QT1100 Driver Handle to easily remove the old bushing and install the new one.

Application

Too numerous to list. Dodge and GM with Slip Yoke diameter of approximately 1-7/8" in diameter

We ask for your Truck information to ensure we send you the correct parts.

*If you are ordering multiple parts for the same application you only need to fill out your truck information once!