QU10219 NV4500 1-2 Shift Rail

photo

QU10219 NV4500 1-2 Shift Rail for all 1992-2007 GM and 1992-2005 Dodge New Venture NV4500 5 speed transmissions. QU10219 is a genuine USA made, New Old Stock (NOS) original equipment NVG 1st and 2nd gear Shift Rail for all NV4500 transmission top covers.

QU10219
New Venture NV4500 1st and 2nd Shift Rail
$11.33
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

The shift cover on NV4500 transmissions was not designed to be disassembled. No factory provisions are provided for removing the 1-2 and 3-4 forks and rails. That does not mean it cannot be done. My fully illustrated, step-by-step, TM1003 NV4500 Shop Manual details proven service procedures for NV4500 shift cover disassembly and reassembly on pages 72-84.

tech note

Need Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated NV4500 Rebuild Manual.

You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.

TOOLS for SPECIFIC NV4500 MODELS

Component 23 Spline
Dodge 4x4
NV4500LD
29 Spline
Dodge 4x4
NV4500HD
30 Spline
Dodge 4x2
NV4500LD
31 Spline
Dodge 4x2
NV4500HD
32 Spline
GM 4x4
35 Spline
GM 4x2
Mainshaft Nut QT2002 QT2001
QT2036
QT2002 QT2001
QT2036
QT2002
QT2028
1-1/2" Hex
Socket
Mainshaft Holding NLA QT2000 NLA QT2011 N/A N/A
5th Gear Nut
Torx® Cross Bolt
N/A QT9205 N/A QT9205 N/A N/A
Output Seal Installer N/A QT1801 N/A QT2058
CALL
Not Used Not Used
Tailshaft Bushing Remover and Installer Not Used Not Used Not Used QT2044 Not Used Not Used

TOOLS For ALL NV4500 MODELS

Countershaft
Front Bearing Cup Installer
QT1802 Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal
Countershaft Front Bearing Installer QT2004 Can also use to press 3-4 Synchro Hub on original equipment mainshafts
Input Bearing & Countershaft Rear Bearing Installer QT2005 Can also use to install Input Seal
Input Bearing Cup Installer QT1801 Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
Countershaft Support QT2006 Use to support front of countersahft when installing countershaft rear bearing
1-2 Synchronizer Support QT2008 Use to support 1-2 synchronizer hub during synchronizer assembly
10mm 1/2" Drive 12 Point Socket QT1020 USA Made Impact Socket for Factory Tailshaft Housing Bolts
Long Shank Punch for Shift Lug QT9300 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin
tech note

Matching Parts for QU10052 NV4500 1-2 Shift Fork:
QU10081 1st-2nd Synchro Clutch Ring
QU10131 Shift Tower Seal or Boot for 1992-1997 Top Covers with Integral Towers
QK1106 Early Plug Kit for 1995 Covers
QK1144 Early Top Cover Service Kit for 1995
QK1107 Late Plug Kit for 1996-2007 Covers
QK1145 Late Top Cover Service Kit for 1996-2007
QK1108 Top Cover Roll Pin Kit
QU10222 Top Cover Small Parts Kit
QU10186 Plunger, Shift Rail Detent Except 2002-2007 GM
QU10110 Poppet Spring, Green Medium Compression
QU10160 Top Cover Oil Baffle
QU10052 1-2 Shift Fork
QU10032 OE 3-4 Fork or QU10082 Replacement 3-4 Shift Fork
QU10230 3-4 Shift Rail except 2002-2007 GM
QU10080 Reverse Shift Fork for 1992-1997 Covers with Integral Shift Towers
QU10050 Reverse Shift Fork for 1994.5-2007 Covers with Bolt-On Shift Towers
QU10220 5th-Reverse Shift Rail
QK1123 Shift Stub Kit
QK1027 Shift Lever and Stub Kit
QU10262 Bare Cover Plate for 1992-1997 Transmissions with Integral Shift Tower
QU10263 Bare Cover Plate for 1995-2007 Transmissions with Bolt-On Towers
QK1094 Reverse Shift Fork Pad Kit for 1992-1997 Reverse Forks with Straight Tips
QK1095 Reverse Shift Fork Pad Kit for 1997-2007 Reverse Forks with Curved Tips
QU90003 Anaerobic Sealant
QU90006 3.35 oz Ultra Black RTV Sealant
QU90005 0.5 oz Ultra Black RTV Sealant
S24200 6ml Medium Strength Blue Threadlocker
S9978 1 gram Medium Strength Blue Threadlocker
S9979 1 gram High Strength Red Threadlocker
S24026 High Temperature Threadlocker for Mainshaft Nut
QU90020 NV4500 Manual Transmission Oil
TM1003 NV4500 Shop Manual
V1003DVD NV4500 Overhaul Video

Application

Chevy and GMC:
1992-1999 C1500, K1500, C2500, K2500, C3500, C3500HD, K3500 with NV4500 5 Speed
2000-2006 C2500, K2500, C3500, K3500 Standard and HD Pickup based models with NV4500 5 Speed
2000-2002 C3500HD 15,000 Lb. GCVW Cab and Chassis with NV4500 5 Speed
2007 C2500, K2500 Silverado Classic and Sierra Classic with NV4500 5 Speed

Dodge and Ram:
1992-1993 Ramcharger, D150, W150, D250, W250, D350, W350 with NV4500 5 Speed
1994-2003 Ram 2500, Ram 3500 with V10 and NV4500HD 5 Speed
1998-2004 Ram 2500, Ram 3500 with Cummins Diesel and NV4500HD 5 Speed
1998-2005 Ram 2500, Ram 3500 with gas V8 and NV4500LD 5 Speed