QU30037, QU30037U Transfer Case Speedometer Drive Gear for Chevy and GMC

photo

photo

QU30037GM NP205 7 Tooth Speedo Drive Gear Fits the splined rear output shaft of Chevy and GMC 1974-1979 NP203 and 1973-1989 NP205 Transfer Cases. Original Gear was Red, replacement gears as of 2009 are natural color. Made in U.S.A.

QU30037U Used NP205 7 Tooth Speedo Drive Gear

QU30037
GM NP205 Transfer Case Speedometer Drive Gear
$38.50
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU30037U
Used NP205 7 Tooth Speedo Drive Gear
$14.00
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

QU30037 plastic speedometer drive gear was introduced in some late 1973 or early 1974 Chevy and GMC transfer cases. Most 1973-1974 NP205 gear drive models still used smooth bore steel drive gears, however, as best as I can remember, plastic gears were used for just about all models by 1975, but, GM parts books do list the steel gear up to 1976.

tech note

QU30037 Speedometer Gear for Chevy and GMC NP203 Chain Drive and NP205 Gear Drive Transfer Cases is a 7 tooth red or natural plastic gear with 38 internal splines that fits most GM NP205 Transfer Cases. It is unique to GM. It will NOT interchange with Dodge, Ford, and International gears!

tech note

I believe 1990 was the year GM switched to electronic signal generation. These cases have a steel reluctor wheel instead of a plastic drive gear. The electronic speedometer sending unit screws into the rear output housing. A magnet on the sending unit reads off the reluctor wheel. The rear output housing is different for electronic and mechanical speedometer versions.