QU30094 GM NV4500 1410 Series Transmission Rear Output Yoke

photo

QU30094 GM C-Truck 35 Spline NV4500 Transmission 1410 Series Rear Output Yoke for Spicer 1410 series universal joint. These genuine New Venture original equipment yokes fit fixed rear yoke type, 1992-2007 GM 4x2 MT8 or MW3 NV4500 5 Speed Manual Transmissions in C2500 and C3500 conventional pickups without transmission mounted parking brakes. New or new takeoff yokes may have some slight surface rust yoke casting from long storage.

Also see QU10183 1410 Series Yoke with Dampener

QU30094
1410 Rear Output Yoke for GM 4x2 NV4500 Transmission
$111.85
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

Dan the Gear Man® Tech Note 1:
QU30094 is made to accept universal joints made to Spicer 1410 series dimensional specifications. U-Joint cup diameter is 1-3/16". Overall width of installed universal joint is 4-3/16". Use with TK40705 or QU40789 universal joints.

tech note

Dan the Gear Man® Tech Note 2:
Need Exploded Views, Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated NV4500 Rebuild Manual.

You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.

TOOLS for SPECIFIC NV4500 MODELS

Component 23 Spline
Dodge 4x4
NV4500LD
29 Spline
Dodge 4x4
NV4500HD
30 Spline
Dodge 4x2
NV4500LD
31 Spline
Dodge 4x2
NV4500HD
32 Spline
GM 4x4
35 Spline
GM 4x2
Mainshaft Nut QT2002 QT2001
QT2036
QT2002 QT2001
QT2036
QT2002
QT2028
1-1/2" Hex
Socket
Mainshaft Holding NLA QT2000 NLA QT2011 N/A N/A
5th Gear Nut
Torx® Cross Bolt
N/A QT9205 N/A QT9205 N/A N/A
Output Seal Installer N/A QT1801 N/A QT2058
CALL
Not Used Not Used
Tailshaft Bushing Remover and Installer Not Used Not Used Not Used QT2044 Not Used Not Used

TOOLS For ALL NV4500 MODELS

Countershaft
Front Bearing Cup Installer
QT1802 Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal
Countershaft Front Bearing Installer QT2004 Can also use to press 3-4 Synchro Hub on original equipment mainshafts
Input Bearing & Countershaft Rear Bearing Installer QT2005 Can also use to install Input Seal
Input Bearing Cup Installer QT1801 Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
Countershaft Support QT2006 Use to support front of countersahft when installing countershaft rear bearing
1-2 Synchronizer Support QT2008 Use to support 1-2 synchronizer hub during synchronizer assembly
10mm 1/2" Drive 12 Point Socket QT1020 USA Made Impact Socket for Factory Tailshaft Housing Bolts
Long Shank Punch for Shift Lug QT9300 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin
tech note

Dan the Gear Man® Tech Note 3:
Matching Parts for QU30094 NV4500 Rear Output Yoke:
QU10720 4x2 NV4500 Transmission Rear Output Seal
QU30009 Internal Spline Seal
QU30095 Yoke Washer (fits between Yoke and Nut)
QU10181 Yoke Nut
QK3112 U-Joint Strap and Bolt Kit
QU10177 Mainshaft Bearing Spacer
QU10719 4x2 Transmission Mainshaft (Rear Output Shaft)
TK40705 or QU40789 Universal Joints
QU10727 Dampened 1350 Series Output Yoke
QU10184 1350 Series Output Yoke
QU10183 Dampened 1410 Series Output Yoke

Application

Chevy and GMC:
1992-1999 C2500, C3500 with NV4500 5 Speed
2000-2006 C2500, C3500, Standard and HD Pickup based models with NV4500 5 Speed
2007 C2500 Silverado Classic and Sierra Classic with NV4500 5 Speed