QU30139 1 Ton 4x4 Hub and Rotor for Chevy and GMC Dana 60 Front Axle

QU30139 GM Dana 60 SRW Hub and Rotor Assembly is a New Old Stock (NOS) genuine GM internally splined front Hub and Rotor assembly for Dana 60 front axles on all 1977-1991 Chevy and GMC K30/K35/K3500/V3500 1 ton Single Rear Wheel (SRW) 4x4 trucks. QU30139 includes assembled hub and rotor with eight 9/16" wheel bolts plus factory installed QU50396 and QU50411 Timken® Bearing Cups. Made in U.S.A.Sold Out See Tech Note 2 for replacement individual components
One Dana 60 SRW Hub and Rotor for 1977-1991 GM 1 Ton
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note
Dan the Gear Man Tech® Note 1:
GM used different Dana 60 hub and rotor assemblies for SRW and DRW trucks. The wheel hub castings are quite different, but both types use the same spindles, axle shafts, and brakes. If you wish to convert a Dana 60 dually front axle to take single rear wheel type wheels, all you need to do is swap your original dually type hubs for a pair of QU30139 hubs
tech note
Dan the Gear Man Tech® Note 2:
QU30139 Assembly is out of production and sold out as of 3-2016. Order the following component parts:
TKA4962 USA made Heavy-Duty Front Hub with Timken Bearing Cups
QU80005 Brake Rotor
(8) QU30096 Wheel Studs
tech note
Dan the Gear Man Tech® Note 3:
Matching Parts for QU30139 Chevy/GMC Splined Front Wheel Hub and Rotor:
QU40119 Wheel Seal
QU50412 Outer Wheel Bearing
QU50398 Inner Wheel Bearing
QU40293C Spindle
QK4728 6 Slot Spindle Nut Kit (1977-1981.5)
QK4729 4 Slot Spindle Nut Kit (1981.5-1991)
QU90018 Protection ES Synthetic Wheel Bearing Grease
QT1505 Wheel Seal Installer
QT1100 Driver Handle for Installers
QT1018 and QT1110 4 Lug Spindle Nut Sockets


Chevy and GMC:
1977-1986 K30, K35, K3500 with Single Rear Wheels
1987-1991 V30, V35, V3500 with Single Rear Wheels