QU40035, QU40035U Hub Spring Plate

photo

photo

QU40035 Hub Spring Plate fits between the QU40050 hub spring and the outer wheel bearing cup on SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer factory lock out hubs or full time drive gears. These Spring Plates were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. Made in U.S.A.

Also available while supplies last: QU40035U Used Hub Spring Plate

QU40035
Hub Spring Plate
$8.51
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QU40035U Good Used
Hub Spring Plate
$5.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

These 2.89" diameter, cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring! Properly installed, the large diameter end of QU40035 Spring Plate will fit against the outer bearing cup on the inboard side. The function of this part is to protect the outer wheel bearing from the spring.

tech note

Spicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: QU40154 Hub Cam, QU40558R, QU40559R, QU40560R, QU40561R (Hub Gears), QU40374U Hub Dial, QU40032 Axle Shaft Snap Ring, QU40050 Spring, and QU40035 Spring Plate.

tech note

QU40035 Spring Plate is NOT used with Warn or any other aftermarket hub-lock. QU40035 is only used with Spicer factory plastic dial hubs or with full time splined hub drive gears that are held under tension by QU40050 spring.

tech note

Matching Parts for QU40035 Hub Plate:
QU40598/QU40428/QU40657 Splined Hub Gears
QU40614 Axle Shaft Snap Ring
QU40050 Hub Spring
QU50447 Outer Wheel Bearing Cup
QU50448 Outer Wheel Bearing
QU40221 Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt
QU56018 Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)

Application

APPLICATIONS:
(part will fit these models but may not have been original equipment for all years)

Chevy and GMC:
1960-1979 K5 Blazer, Jimmy, K10/K15/K1500/V1500 Truck and Suburban
1977.5-1991 K20/K25/K2500/V2500 Truck and Suburban

Dodge:
1969-1974 W100
1980-1993 W150, W250 with Dana 44 axle

Ford:
1959-1987 F100, F150 (Dana 44)
1966-1979 Bronco (Dana 30, Dana 44)
1988-1989 F150, Bronco with Splined Wheel Hub (Dana 44IFS)
1990-1996 F150 and Bronco (Dana 44IFS)
1959-1975 F250 with 3330 Pound Dana 44
1978-1979 F250 (Dana 44)
1980-1996 F250 (Dana 44IFS)

IHC:
1967-1975 1100 with internal spline wheel hub

Jeep:
1974-1991 Cherokee, Wagoneer
1974-1988 J10
1977.5-1988 J20