QU40483 Dodge Ram Dana 80 Rear Axle 4.10 Ratio Ring and Pinion Gear Set


QU40483 Dana 80 4.10 Ratio Ring and Pinion Kit for Dodge Ram is a genuine Dana-Spicer Ring and Pinion Kit for 1994-2002 Dodge Ram 2500 and 3500 trucks that includes these original equipment components: Matched Ring and Pinion Gear Set, Inner Pinion Bearing Cup/Cone, Outer Pinion Bearing Cup/Cone, Pinion Seal (see Tech Note 1), Pinion Nut, Pinion Washer, Outer Pinion Slinger, Pinion Depth Shims, Differential Adjusting Shims, Ring Gear Bolts, and Pinion Preload Shims. Country of origin on the gear sets will vary, Dana has plants in U.S.A., Mexico, and South America. Small parts mostly U.S.A. made and Bearings, usually U.S.A.

Dana 80 4.10 Ratio Rear Axle Ring and Pinion Set
Approximate lead time to Ship: 3-4 business days
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

The pinion seal supplied with this Kit fits 1994-1999 Dodge Dana 80 rear axles. For 2000 to 2002 axles, Dodge used two different pinion oil seals plus an outer rubber wiper seal. If you have a 2000-2002 Axle, also order QU40251 outer wiper seal plus the correct oil seal for your particular axle:
QU40335 2000-2001 shallow shell with no flange (NOT interchangeable with any other Seal)
QU40248 2001-2002 deep shell with flange (NOT interchangeable with any other Seal)

tech note

The 4.10 ratio Ring and Pinion gears in this kit have 41 teeth on the Ring (Crown) Gear and 10 teeth on the pinion gear.

tech note

Matching Parts and Tools for QU40483 Dana 80 Gear Set:
QU40716 1994-1999 Pinion Yoke
QU10636 2000-2002 Pinion Yoke
QU40294 ABS Tone Ring
QU40259 Differential Bearing Set
QU40343 Differential Cap Retaining Bolts
QU40260 Outboard Differential Bearing Spacers
QU40709 U-Joint to Pinion Yoke Strap and Bolt Kit
QU40218 Limited Slip Lube
QU40490 Bare Open Differential Case
QU40295 Open Differential Internal Parts Kit
QU40078 Axle Shaft Flange Gasket
S82194 RTV Sealant
S24200 Threadlocker
QU90008 Gear Marking Compound
TM4400 Pinion and Differential Bearing Service Manual for Dana Axles
QU40306 Axle Shaft Flange to Wheel Hub Bolt
QT1032 Differential Case Spreader
QT1099 Dana 80 Differential Master Bearings
QT1004 Inner Pinion Bearing Installer
QT1806 Inner Pinion Bearing Cup Installer
QT1801 Outer Pinion Bearing Cup Installer