QU40634 Dana 44 Empty Slow Differential Case

QU40634 New Dana 44 Slow Ratio Empty Open Differential Case Kit is a genuine Dana OEM empty differential case kit for Dana 44 front and rear axles with 3.92 or numerically higher gear ratios and 30 spline axle shafts.These popular diffs were used by Dodge, Ford, GM, International, and Jeep and they will fit many front/rear axle applications from 1967 to 1993. Kit includes the bare Diff, ring gear bolts, differential side bearing shims, and differential cover gasket. Assembled in U.S.A with domestic and imported parts.

Also see QU40635 New Dana 44 Loaded Diff Assembly Kit
Also available while supplies last: QU30170U used Dana 44 Loaded Diff

QU40634
New Dana 44 Empty Differential Case Kit for
3.92 and Numerically Higher Gear Ratios

$129.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

QU40634 Differentials fit most 1967-1993 Dana 44 axles with 3.92 to 5.89 ratio gear sets. If you need a differential for 2.73 to 3.73 ratio gear sets, see QU40632.

tech note

Ring Gear Bolts are designed to be used once and only once.

tech note

For more information about differences between early and late production Dana 44 differential cases including spline and bearing changes, see my 1953-1993 Dana 44 Diff Tech Page

tech note

Related items for QU40634 Dana 44 Diff:
QU50576 Differential Bearing and Seal Kit for 1993 and older axles
QU50537 Timken® Differential Side Bearing Cup
QU50538 Timken® Differential Side Bearing
QU40177 New Genuine Dana 4.09 Ratio Gear Set with Pinion Bearings and small parts
QU40215 Pinion Seal to 1993
QU40028 Inner Pinion Bearing Slinger
QU40448 Inner Pinion Oil Baffle
QU40002 Outer Pinion Slinger
QU40311 Diff and Pinion Shim Kit
QU40009 Pinion Lock Nut
QU40010 Pinion Yoke Washer
QU90009 Axle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush
QT1032 Differential Housing Spreader
QT1044 Inner Pinion Bearing Installer
QT1812 Outer Pinion Bearing Cup Installer
QT1815 Inner Pinion Bearing Cup Installer
QT1097 Differential Master Bearing Set
QT1115 Differential Side Bearing Installer
QT1035 Diff Press Plate

Application

APPLICATIONS:

Chevy and GMC (Front Axle):
1967-1980 K20/K25/K2500
1973-1979 K5 Blazer, Jimmy, K10/K15

Dodge (Front Axle):
1967-1972 W100
1967-1993 W200, W250 with Dana 44 axle

Ford (Front Axle):
1967-1977.5 F250 Regular Cab
1971-1977 Bronco

IHC (Front Axle):
1967-1975 1100, 1200
1974-1980 Scout

IHC (Rear Axle):
1974-1980 Scout

Jeep (Front Axle):
1967-1973 J-Series Truck
1974-1985 Cherokee, Wagoneer, J10, J20

Jeep (Rear Axle):
1972-1975 CJ5, CJ6
1974-1985 Cherokee, Wagoneer, J10