QU40746 New Process NP205 32 Spline 1310 Series Rear Output Yoke is a redesigned yoke style that uses new style QU40735 straps and bolts to retain the universal joint. Designed to replace your original Ford or GM NP205 Rear Output Yoke or can be retrofitted to any other 32 spline New Process NP205 fixed yoke application. Can be used as a Remote Input or Front Output Yoke, simply by adding QU20030 Front Yoke Slinger. Use with 2-1/8" inside diameter seal.
QK2033 NP205 32 Spline 1310 Series Rear Output Yoke Kit Includes QU40746 Yoke, QU40735 Strap/Bolt Kit, TK50123 Rear Seal, TK10513 Spline Seal, TK10503 Gasket, QK2036 Nut/Washer Set, and S9978 Threadlocker.
QU40746U Used 32 Spline 1310 Series Rear Output Yoke. Limited to stock on hand
QU40931 32 Spline 1310 Series U-Bolt Style Yoke
QU40931U Used 32 Spline 1310 Series U-Bolt Style Yoke Limited to stock on hand
If you need a 1310 series Constant Velocity Output Yoke, see QU50619.
To convert QU40746 rear output yoke to a Remote Input or Front Output Yoke, simply add QU20030 Front Yoke Slinger.
Optional matching parts for QU40746 Yoke are:
QU40735 Strap and Bolt Kit to secure the driveshaft universal joint
TK50123 Standard, 2-1/8" ID Original Equipment Type Single Seal
TK50092 2-1/8" Rear Output Seal (order 2 for maximum oil retention)
TK10513 Rubber Spline Seal to seal oil from leaking past the inside splines
QK2036 Output Yoke Nut and Washer Set
TK10503 5 Bolt Gasket for Rear Output Bearing Flange
TK10514 4 Bolt Gasket for Front Output or Remote Input Bearing Flanges
TK40720 or QU40769 1310 Series Universal Joints for Chevy, Ford, GMC, and IHC
QU40736 1310 x 7260 Conversion U-Joint for Dodge
Most older production NP205 non-CV yokes like QU40931 use QU40768 U-Bolt Kit to secure the universal joint cups in the yoke. Late production yokes like QU40746 use QU40735 Strap and Bolt Kit with stamped metal straps and bolts. The main engineering reason for the change was to increase universal joint life by minimizing cup distortion caused by the u-bolts actually deforming the cups when tightened. Ford tried to address this back in the 1970's and 1980' by using larger diameter cups with thicker walls on the 1330F series universal joint. The u-bolts are probably the stronger of the two methods of u-joint retention, but of little real value unless extreme driveline angles or competition reliability are a factor. Except for the 1330F universal joint and with all other factors equal, universal joints secured with straps and bolts will usually outlast ones secured with u-bolts.
For high performance rear output applications, I recommend you replace your weak original NP205 32 spline rear output shaft with our TK50084 shaft. The redesigned, stronger part which was exclusively used in 1989-1993 Dodge Cummins Diesel Trucks with 5 speed manual transmissions.
Chevy and GMC:
1969-1979 New Process NP205 Transfer Case Rear Output with 1310 Series U-Joint
1969-1974 Conversion Yoke for replacing NP205 7260 series Input or Output (See Tech Note 3)
1980-1988 Conversion Yoke for replacing NP205 7260 series Input or Output (See Tech Note 3)
1973-1978 F-150 with New Process NP205 Transfer Case Front or Rear Output with 1310 Series non-CV Shaft
1973-1977.5 F250 New Process NP205 Transfer Case Input with 1310 Series U-Joint
1969-1975 New Process NP205 Transfer Case Input or Output with 1310 Series Shaft