QU40764 Spicer 1330 x Dodge 7290 Conversion U-joint

photo

QU40764 Greaseable Front U-Joint with 2 External and 2 Internal Snap Rings Hot-forged, alloy steel, greaseable front universal joint (slip yoke to axle pinion yoke) to replace the original conversion universal joint used by Dodge for early 1999 Dodge Ram 1500, Ram 2500, and Ram 3500 4x4 trucks (has 2 external snap rings for the slip yoke and 2 internal c-clips that fit against the inside of the pinion yoke). Made in U.S.A.

Also See TK40804 Cold Forged Universal Joint.

QU40764
Greaseable 1330x7290 Conversion U-joint
$29.83
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

This is a special conversion universal joint used to adapt a driveshaft with a slip yoke made to external snap ring Spicer 1330 specifications to an axle with a pinion yoke made to fit Detroit Universal 7290 series internal c-clip u-joints.
Spicer 1330 external snap ring universal joints have 1-1/16" diameter cups and have a 3-5/8" overall width.
Detroit 7290 internal C-clip u-joints have 1-1/8" diameter cups and fit yokes with an inside measurement of 2-5/8".

tech note

The only original equipment use I know of for this special conversion u-joint was by Dodge for the front driveshaft to front axle coupling on early to mid production 1999 full size Ram 4x4 trucks. It can also be used for retrofitting any other Dodge application that requires coupling a 1330 series yoke to a 7290 series yoke such as when replacing the factory slip yoke on 1993-1998 4x4s with QU40701 Slip Yoke.

Application

APPLICATIONS:

Original Equipment:
1999 Dodge Ram 1500, Ram 2500, Ram 3500 4x4 Trucks

Common Conversion Applications when retrofitting QU40701 Front Driveshaft Slip Yoke:
1993 Dodge W-250 and W-350 with the Cummins Diesel Engine
1994-1998 Ram 1500, Ram 2500 Ram 3500 4x4s