QU40823, QK2084 Ford New Process NP205 1330 Series Output Yoke; Kit

photo

photo

QU40823 1330 Series Rear Output Yoke is a Genuine Spicer Replacement Yoke for many 1970's Ford NP205 rear output applications. These bargain priced Genuine Spicer Yokes may have some surface rust from long storage. QU40823 can be used to upgrade any Chevy, Dodge, Ford, GMC, or International NP205 Transfer Case with 32 spline remote input or front/rear output shafts having smaller series output yokes to couple with 1330 series universal joints. Made in U.S.A.

QK2084 1330 Series Rear Output Yoke Kit Includes QU40823 Yoke, QU40768 U-Bolt Kit, QU50380 Rear Seal, TK10513 Spline Seal, QK2036 Nut/Washer Set, TK10503 5 Bolt Gasket, and S9978 Threadlocker.

Also See QU20258U Used Front and QU20259U Used Rear NP205 Yokes

QU40823
New Process NP205 32 Spline 1330 Series Output Yoke
$49.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

QK2084
New Process NP205 32 Spline 1330 Series Output Yoke Kit
$94.98
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

To convert QU40823 rear output yoke to a Remote Input or Front Output Yoke, simply add QU20030 Front Yoke Slinger.

tech note

QU40823 is made for external snap ring type universal joints made to Spicer 1330 series dimensional specifications. The u-joint cup diameter is 1-1/16". The overall width is 3-5/8". Matching universal joints are TK40721 or QU40774.

tech note

Optional matching parts for QU40823 Yoke are:
QU40768 Driveshaft U-Bolt Kit to secure the driveshaft universal joint
QU50380 2" ID Output Seal
TK10513 Rubber Spline Seal to seal oil from leaking past the inside splines
QK2036 Output Yoke Nut and Washer Set
TK10503 5 Bolt Gasket for Rear Output Bearing Flange
TK10514 4 Bolt Gasket for Front Output or Remote Input Bearing Flanges
S9978 Threadlocker
TM2000 NP205 Shop Manual

tech note

For high performance rear output applications, I recommend you replace your weak original NP205 32 spline rear output shaft with our TK50084 shaft. The redesigned, stronger part which was exclusively used in 1989-1993 Dodge Cummins Diesel Trucks with 5 speed manual transmissions.