QU40849 1310 Series Pinion Yoke for Dana 30, Dana 44, Dana 44IFS, and Dana 50IFS Axles is a USA Made, 26 spline replacement, u-bolt style pinion yoke for front or rear Dana axles from the 1960s to the 1980s. Use with QU40768 U-Bolt Kit. Includes pinion slinger made to match QU40215 Pinion Seal. Made in U.S.A.
Also available while supplies last: QU40849U Used Yoke
Also see QU40734 Strap and Bolt style Yoke
QU40849 takes external snap ring universal joints made to Spicer 1310 series dimensional specifications. The u-joint cup diameter is 1-1/16". The overall width is 3-7/32". For matching u-joints, see TK40720 Torque King® premium non-greaseable universal joint or QU40731 greaseable u-joint with metal backed seals.
Grease the seal lip and pinion yoke seal surface to provide initial lubrication prior to installing the yoke on the axle.
Pinion bearing preload on axles that would have had this pinion yoke as original equipment was set by shims.
Chevy and GMC:
1965-1981 All K5 Blazer/Jimmy, K10/K15/K1500 and K20/K25/K2500 with 26 spline Dana 44 Front Axle
1968-1993 Front Dana 44 converted to 1310 U-Joint
1974-1975.5 Ramcharger, W100, and W200 with Spicer front CV driveshaft
1967-1978 Bronco and F100/F150 with Dana Front Axle and 1310 U-Joint
1973-1978 F250 with Full Time Transfer Case and 1310 U-Joint
1973-1980 Scout with Dana 30 or Dana 44 Front and/or Rear Axles and 1310 U-Joints
1967-1991 All Models with Dana 30 or Dana 44 Front and/or Rear Axles and 1310 U-Joints